Skip to main content

Research Repository

Advanced Search

The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion

Sanchez, S.; Gaspard, G.; Hyde, C.J.; Ashcroft, I.A.; Ravi, G.A.; Clare, A.T.

The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion Thumbnail


Authors

S. Sanchez

G. Gaspard

IAN ASHCROFT IAN.ASHCROFT@NOTTINGHAM.AC.UK
Professor of Mechanics of Solids

G.A. Ravi

ADAM CLARE adam.clare@nottingham.ac.uk
Professor of Manufacturing Engineering



Abstract

Components manufactured by laser powder bed fusion (LPBF) are limited by their performance for use in critical applications. LPBF materials have microstructural defects, such as suboptimal grain size and morphology, and macroscale anomalies, such as lack of fusion. This results in LPBF components performing below their wrought counterparts for various mechanical properties, such as creep which has seldom been researched. To understand the creep behaviour of LPBF alloy 718, parts were fabricated using different scanning strategies and build orientations and creep tested at 650 °C under a 600 MPa load. Heat treatment increased the creep life by a factor of 5, confirming its necessity. The build orientation and stress state were shown to be determining factors in the creep failure mechanisms. The Meander scanning strategy resulted in a 58% increase in creep life compared to the Stripe strategy, due to the detrimental effects of the numerous laser overlapping regions in the Stripe strategy. For a given strategy, a 24% increase in creep life compared to wrought alloy 718 was observed, indicating that LPBF has the potential to surpass wrought material properties. As a result of this work, it is possible to propose build strategies for high temperature creep applications.

Citation

Sanchez, S., Gaspard, G., Hyde, C., Ashcroft, I., Ravi, G., & Clare, A. (2021). The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion. Materials and Design, 204, Article 109647. https://doi.org/10.1016/j.matdes.2021.109647

Journal Article Type Article
Acceptance Date Mar 6, 2021
Online Publication Date Mar 15, 2021
Publication Date Jun 1, 2021
Deposit Date Mar 8, 2021
Publicly Available Date Mar 16, 2022
Journal Materials and Design
Print ISSN 0264-1275
Electronic ISSN 1873-4197
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 204
Article Number 109647
DOI https://doi.org/10.1016/j.matdes.2021.109647
Public URL https://nottingham-repository.worktribe.com/output/5380788
Publisher URL https://www.sciencedirect.com/science/article/pii/S0264127521002008

Files





You might also like



Downloadable Citations