Elia Brescia
Nonintrusive Parameter Identification of IoT-Embedded Isotropic PMSM Drives
Brescia, Elia; Massenio, Paolo Roberto; Di Nardo, Mauro; Cascella, Giuseppe Leonardo; Gerada, Chris; Cupertino, Francesco
Authors
Paolo Roberto Massenio
Mauro Di Nardo
Giuseppe Leonardo Cascella
Professor CHRISTOPHER GERADA CHRIS.GERADA@NOTTINGHAM.AC.UK
PROFESSOR OF ELECTRICAL MACHINES
Francesco Cupertino
Abstract
This article proposes a nonintrusive parameter identification procedure suitable for Internet-of-Things (IoT)-embedded isotropic permanent magnet synchronous machines (PMSMs). The method is designed for scenarios where only measurements collected without additional sensors, dedicated tests, or signal injection from in- service off-the-shelves motor drives are available. After automatic detection of the steady-state operating conditions (OCs) defined by the triplet current–speed–temperature, the rotor flux linkage, the stator resistance, the inductance, and the inverter distorted voltage term are estimated using two operating points. Particular emphasis is placed in defining the criteria of selecting these two optimal OCs to minimize the estimation errors. The latter are due to the inevitable difference between the parameters in different operating points. As a vessel to investigate the effectiveness of the proposed parameter identification, experimental and simulation tests carried out on a high-speed PMSM drive have been used for validation purpose. The proposed method is also compared with the existing methods from the literature to demonstrate its superiority in the considered scenario.
Citation
Brescia, E., Massenio, P. R., Di Nardo, M., Cascella, G. L., Gerada, C., & Cupertino, F. (2023). Nonintrusive Parameter Identification of IoT-Embedded Isotropic PMSM Drives. IEEE Journal of Emerging and Selected Topics in Power Electronics, 11(5), 5195-5207. https://doi.org/10.1109/JESTPE.2023.3292526
Journal Article Type | Article |
---|---|
Acceptance Date | Jun 14, 2023 |
Online Publication Date | Jul 5, 2023 |
Publication Date | 2023-10 |
Deposit Date | Dec 13, 2024 |
Publicly Available Date | Dec 20, 2024 |
Journal | IEEE Journal of Emerging and Selected Topics in Power Electronics |
Print ISSN | 2168-6777 |
Electronic ISSN | 2168-6785 |
Publisher | Institute of Electrical and Electronics Engineers |
Peer Reviewed | Peer Reviewed |
Volume | 11 |
Issue | 5 |
Pages | 5195-5207 |
DOI | https://doi.org/10.1109/JESTPE.2023.3292526 |
Keywords | Electrical and Electronic Engineering; Energy Engineering and Power Technology |
Public URL | https://nottingham-repository.worktribe.com/output/22726607 |
Publisher URL | https://ieeexplore.ieee.org/document/10173516 |
Files
Nonintrusive Parameter Identification of IoT-Embedded Isotropic PMSM Drives
(1.6 Mb)
PDF
Publisher Licence URL
https://creativecommons.org/licenses/by/4.0/
You might also like
All-Inorganic Electrical Insulation Systems for High-Power Density Electrical Machines
(2024)
Presentation / Conference Contribution
Multiphysics Sizing of Interior Permanent Magnet Machines Based on Geometric Methodology
(2024)
Journal Article
AFPM Machines Equipped with Multilayer Magnets
(2024)
Journal Article
Life Characterization of PEEK and Nanofilled Enamel Insulated Wires Under Thermal Ageing
(2024)
Journal Article
Downloadable Citations
About Repository@Nottingham
Administrator e-mail: discovery-access-systems@nottingham.ac.uk
This application uses the following open-source libraries:
SheetJS Community Edition
Apache License Version 2.0 (http://www.apache.org/licenses/)
PDF.js
Apache License Version 2.0 (http://www.apache.org/licenses/)
Font Awesome
SIL OFL 1.1 (http://scripts.sil.org/OFL)
MIT License (http://opensource.org/licenses/mit-license.html)
CC BY 3.0 ( http://creativecommons.org/licenses/by/3.0/)
Powered by Worktribe © 2025
Advanced Search