Outputs (487)

Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment (2018)
Journal Article
Buttress, A., Rodriguez, J., Ure, A., Ferrari, R., Dodds, C., & Kingman, S. (2019). Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment. Minerals Engineering, 131, 407-419. https://doi.org/10.1016/j.mineng.2018.11.025

© 2018 Demand for high purity silica used in component manufacture is set to outstrip current supply in the near future. As such, alternative processing routes to feed-stock materials suitable for use in lighting and solar cell fabrication are requir... Read More about Production of high purity silica by microfluidic-inclusion fracture using microwave pre-treatment.

A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718 (2018)
Journal Article
Walker, T., Bennett, C., Lee, T., & Clare, A. (2019). A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718. International Journal of Mechanical Sciences, 151, 609-621. https://doi.org/10.1016/j.ijmecsci.2018.12.004

Direct Energy Deposition (DED) is being increasingly used to repair high value components that have been damaged in-service. The uptake of DED and laser cladding operations for repair is inhibited by accurate modelling techniques. Often the repair pr... Read More about A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718.

Speed-Sensorless DTC of a Matrix Converter Fed Induction Motor Using an Adaptive Flux Observer (2018)
Journal Article
Mir, T. N., Singh, B., & Bhat, A. H. (2021). Speed-Sensorless DTC of a Matrix Converter Fed Induction Motor Using an Adaptive Flux Observer. IETE Journal of Research, 67(3), 414-424. https://doi.org/10.1080/03772063.2018.1552206

This paper aims at combining some of the best features of an available induction motor (IM) drive system while introducing a simplified adaptive flux estimation algorithm for sensorless operation. The use of a matrix converter (MC) is proposed to ach... Read More about Speed-Sensorless DTC of a Matrix Converter Fed Induction Motor Using an Adaptive Flux Observer.

Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation (2018)
Journal Article
Wang, L., Yang, J., Ma, H., Wang, Z., Olanrewaju, K. O., & Wheeler, P. (2019). Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation. IEEE Transactions on Power Electronics, 34(9), 8613-8625. https://doi.org/10.1109/tpel.2018.2885145

Silicon carbide (SiC) junction field-effect transistor (JFET) based bi-directional switches (BDSs) have great potential in the construction of several power electronic circuits, including matrix converters, multi-level converters, solid state breaker... Read More about Analysis and Modeling of SiC JFET Bi-Directional Switches Parasitic Oscillation.

On modelling of laser assisted machining: forward and inverse problems for heat placement control (2018)
Journal Article
Shang, Z., Liao, Z., Sarasua, J. A., Billingham, J., & Axinte, D. (2019). On modelling of laser assisted machining: forward and inverse problems for heat placement control. International Journal of Machine Tools and Manufacture, 138, 36-50. https://doi.org/10.1016/j.ijmachtools.2018.12.001

Laser assisted machining (LAM) is one of the most efficient ways to improve the machinability of difficult-to-cut materials (e.g. Nickel-based superalloys). In the conventional LAM process, the laser beam is focused ahead of the cutting area at a fix... Read More about On modelling of laser assisted machining: forward and inverse problems for heat placement control.

Investigation of the conversion of fuels in the presence of solid oxygen carriers and the development of a plasma-assisted chemical looping system for H2 production (2018)
Thesis
Zheng, Y. Investigation of the conversion of fuels in the presence of solid oxygen carriers and the development of a plasma-assisted chemical looping system for H2 production. (Thesis). University of Cambridge. https://nottingham-repository.worktribe.com/output/32757541

The thesis, entitled ‘Investigation of the conversion of fuels in the presence of solid oxygen carriers and the development of a plasma-assisted chemical looping system for H2 production’, presents the work of Yaoyao Zheng in the Department of Engine... Read More about Investigation of the conversion of fuels in the presence of solid oxygen carriers and the development of a plasma-assisted chemical looping system for H2 production.

The development of a novel technique for small ring specimen tensile testing (2018)
Journal Article
Kazakeviciute, J., Rouse, J., De Focatiis, D., & Hyde, C. (2019). The development of a novel technique for small ring specimen tensile testing. Theoretical and Applied Fracture Mechanics, 99, 131-139. https://doi.org/10.1016/j.tafmec.2018.11.016

The wide scale use of small specimens in routine testing programs could significantly reduce material resource requirements (factors of 10 are easily achievable). This is a major benefit to situations where there is not enough material to manufacture... Read More about The development of a novel technique for small ring specimen tensile testing.

Wave scattering in coupled composite plates (2018)
Presentation / Conference Contribution
Aimakov, N., Tanner, G., & Chronopoulos, D. (2018, May). Wave scattering in coupled composite plates. Presented at Noise and Vibration Emerging Methods - NOVEM 2018, Ibiza, Spain

Establishing the wave propagation characteristics at plate junctions is of great importance in the prediction of vibrational energy transmission across complex structures. A hybrid approach combining the finite element (FE) and the wave finite elemen... Read More about Wave scattering in coupled composite plates.

FRP-strengthened masonry (2018)
Book Chapter
Aiello, M. A., Ghiassi, B., & Lourenço, P. B. (2018). FRP-strengthened masonry. In Long-term Performance and Durability of Masonry Structures: Degradation Mechanisms, Health Monitoring and Service Life Design (209-238). Elsevier. https://doi.org/10.1016/b978-0-08-102110-1.00007-8

This chapter provides an overview of the durability of FRP-strengthened masonry, focusing on the main degradation mechanisms, available literature, and experimental backgrounds. A brief review of the available models for modeling degradation of these... Read More about FRP-strengthened masonry.

Verification of the HDM-4 fuel consumption model using a Big data approach: a UK case study (2018)
Journal Article
Perrotta, F., Parry, T., Neves, L. C., Buckland, T., Benbow, E., & Mesgarpour, M. (2019). Verification of the HDM-4 fuel consumption model using a Big data approach: a UK case study. Transportation Research Part D: Transport and Environment, 67, 109-118. https://doi.org/10.1016/j.trd.2018.11.001

This paper presents an assessment of the accuracy of the HDM-4 fuel consumption model calibrated for the United Kingdom and evaluates the need for further calibration of the model. The study focuses on HGVs and compares estimates made by HDM-4 to mea... Read More about Verification of the HDM-4 fuel consumption model using a Big data approach: a UK case study.