Outputs (39)

Comparison of slotted and slotless PM machines for high kW/kg aerospace applications (2020)
Presentation / Conference Contribution
Dave, N., Vakil, G., Xu, Z., Gerada, C., Zhang, H., & Gerada, D. (2020, November). Comparison of slotted and slotless PM machines for high kW/kg aerospace applications. Presented at 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan

With the ambitious targeted emissions reduction, the aircraft industry is moving towards drastically different aircraft architectures including hybrid-electric. These in turn require electrical machines with a step change improvement in power-density... Read More about Comparison of slotted and slotless PM machines for high kW/kg aerospace applications.

AC loss Analysis in Winding of Electrical Machines with varying Strands-in-hand and Bundle Shapes (2020)
Presentation / Conference Contribution
Bardalai, A., Gerada, D., Xu, Z., & Gerada, C. (2020, November). AC loss Analysis in Winding of Electrical Machines with varying Strands-in-hand and Bundle Shapes. Presented at 2020 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan

This paper presents an investigation into the sensitivity of high-frequency AC effects on the winding with varying number of parallel strands. Based on numerical analysis, a methodology to segregate the losses into components is presented. It is show... Read More about AC loss Analysis in Winding of Electrical Machines with varying Strands-in-hand and Bundle Shapes.

Estimation of Oil Spray Cooling Heat Transfer Coefficients on Hairpin Windings With Reduced-Parameter Models (2020)
Journal Article
Liu, C., Gerada, D., Xu, Z., Chong, Y. C., Michon, M., Goss, J., Li, J., Gerada, C., & Zhang, H. (2021). Estimation of Oil Spray Cooling Heat Transfer Coefficients on Hairpin Windings With Reduced-Parameter Models. IEEE Transactions on Transportation Electrification, 7(2), 793-803. https://doi.org/10.1109/tte.2020.3031373

Hairpin windings and spray cooling are becoming an increasingly popular combination in the field of high-performance electrical machine design. Machines adopting hairpin windings can achieve higher torque and power densities while enabling them to be... Read More about Estimation of Oil Spray Cooling Heat Transfer Coefficients on Hairpin Windings With Reduced-Parameter Models.

Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding (2020)
Presentation / Conference Contribution
Zhu, S., Cox, T., Xu, Z., & Gerada, C. (2020, October). Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding. Presented at 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, MI, USA

This paper presents a five-phase permanent magnet (PM) vernier machine topology equipped with a two-slot pitch winding. The two-slot pitch winding provides a trade-off between fractional slots concentrated winding (FSCW) and integrated slot distribut... Read More about Analysis of a Five-Phase PM Vernier Machine Topology with Two-Slot Pitch Winding.

Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity (2020)
Journal Article
Wang, Y., Jiang, J., Darkwa, J., Xu, Z., Zheng, X., & Zhou, G. (2020). Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity. Renewable Energy, 160, 803-816. https://doi.org/10.1016/j.renene.2020.06.138

A new laser irradiation fracturing method is employed to crack the Hot Dry Rock (HDR) and variations of rock temperature, specific energy (SE) and modified specific energy (MSE), thermal damages and open porosity of granite samples caused by moving l... Read More about Experimental study of thermal fracturing of Hot Dry Rock irradiated by moving laser beam: Temperature, efficiency and porosity.

Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications (2020)
Journal Article
Zhang, H., Hua, W., Gerada, D., Xu, Z., & Gerada, C. (2020). Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications. IEEE Transactions on Energy Conversion, 35(3), 1289-1300. https://doi.org/10.1109/tec.2020.2979886

This paper proposes an analytical model of modular spoke-type permanent magnet (MSTPM) machines based on air-gap field modulation (AFM) theory. Firstly, a fundamental AFM model of open-circuit MSTPM machines is introduced. The open-circuit air-gap fi... Read More about Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications.

Thermal Model Approach to Multisector Three-Phase Electrical Machines (2020)
Journal Article
Zhang, H., Giangrande, P., Sala, G., Xu, Z., Hua, W., Madonna, V., Gerada, D., & Gerada, C. (2021). Thermal Model Approach to Multisector Three-Phase Electrical Machines. IEEE Transactions on Industrial Electronics, 68(4), 2919-2930. https://doi.org/10.1109/TIE.2020.2977559

© 1982-2012 IEEE. Multisector machines reveal a high fault-tolerant capability, since failure events can be isolated by de-energizing the faulty sector, while the healthy ones contribute in delivering the required power. This article is focused on th... Read More about Thermal Model Approach to Multisector Three-Phase Electrical Machines.

Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines (2019)
Journal Article
Bardalai, A., Gerada, D., Golovanov, D., Xu, Z., Zhang, X., Li, J., Zhang, H., & Gerada, C. (2020). Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines. IEEE Transactions on Industry Applications, 56(1), 183-193. https://doi.org/10.1109/TIA.2019.2947552

© 1972-2012 IEEE. In the design of electrical machines, the increase in power density has become one of the main research themes. With most of the power loss in high power density electrical machines often being generated in the stator winding assemb... Read More about Reduction of Winding AC Losses by Accurate Conductor Placement in High Frequency Electrical Machines.

Designing an Advanced Electrical Motor for Propulsion of Electric Aircraft (2019)
Presentation / Conference Contribution
Golovanov, D., Xu, Z., Gerada, D., Page, A., Gerada, C., & Sawata, T. (2019, August). Designing an Advanced Electrical Motor for Propulsion of Electric Aircraft. Presented at AIAA Propulsion and Energy Forum and Exposition, 2019, Indianapolis, IN

A prototype motor rated for 500 kW 3,000 rpm has been developed for aircraft electric propulsion. The design of the motor was optimized using a coupled parameter problem of electromagnetic, mechanical and thermal performances. A high power density of... Read More about Designing an Advanced Electrical Motor for Propulsion of Electric Aircraft.

Thermo-Mechanical Modelling of Bearing Chambers of a High-Speed Starter/Generator (2019)
Presentation / Conference Contribution
Rocca, A. L., Connor, P. H., Xu, Z., Eastwick, C. N., Pickering, S. J., & Gerada, C. (2019, May). Thermo-Mechanical Modelling of Bearing Chambers of a High-Speed Starter/Generator. Presented at 2019 IEEE International Electric Machines & Drives Conference (IEMDC), San Diego, CA, USA

This paper describes the thermal-mechanical characterisation methodology for the bearing chambers of a high-speed (32,000 rpm) electrical starter/generator [1]; presenting a low cost analysis approach and design guideline for future machines. The met... Read More about Thermo-Mechanical Modelling of Bearing Chambers of a High-Speed Starter/Generator.