ISO 19650 Guidance 2: Delivery Phase, Edition 9
(2019)
Digital Artefact
Boutle, A., Churcher, D., Davidson, S., Dodd, P., Dearlove, J., Hooper, E., Horne, M., Ford, J., Rossiter, D., Tennyson, R., Thompson, N., & Zahiroddiny, S. (2019). ISO 19650 Guidance 2: Delivery Phase, Edition 9. [Website]
Outputs (6570)
Synthesis of a CFD benchmark exercise based on a test in the PANDA facility addressing the stratification erosion by a vertical jet in presence of a flow obstruction (2019)
Journal Article
Andreani, M., Gaikwad, A. J., Ganju, S., Gera, B., Grigoryev, S., Herranz, L. E., Huhtanen, R., Kale, V., Kanaev, A., Kapulla, R., Kelm, S., Kim, J., Nishimura, T., Paladino, D., Paranjape, S., Schramm, B., Sharabi, M., Shen, F., Wei, B., Yan, D., & Zhang, R. (2019). Synthesis of a CFD benchmark exercise based on a test in the PANDA facility addressing the stratification erosion by a vertical jet in presence of a flow obstruction. Nuclear Engineering and Design, 354, Article 110177. https://doi.org/10.1016/j.nucengdes.2019.110177The benchmark exercise discussed in this paper was conducted within the OECD/NEA project HYMERES. The specific experiment in the PANDA facility chosen for the present benchmark addresses the stratification erosion in a vessel where the upper region c... Read More about Synthesis of a CFD benchmark exercise based on a test in the PANDA facility addressing the stratification erosion by a vertical jet in presence of a flow obstruction.
Compression capacities of cold-formed high strength steel tubular T-joints (2019)
Journal Article
Pandey, M., & Young, B. (2019). Compression capacities of cold-formed high strength steel tubular T-joints. Journal of Constructional Steel Research, 162, Article 105650. https://doi.org/10.1016/j.jcsr.2019.05.040The paper presents a test programme on cold-formed high strength steel tubular T-joints with fully supported chord members. The T-joints consist of brace members made up of square, rectangular and circular hollow sections, while chord members were ma... Read More about Compression capacities of cold-formed high strength steel tubular T-joints.
Optimised mode selection in electromagnetic sensors for real time, continuous and in-situ monitoring of water cut in multi-phase flow systems (2019)
Journal Article
Yuan, C., Bowler, A., Davies, J. G., Hewakandamby, B., & Dimitrakis, G. (2019). Optimised mode selection in electromagnetic sensors for real time, continuous and in-situ monitoring of water cut in multi-phase flow systems. Sensors and Actuators B: Chemical, 298, Article 126886. https://doi.org/10.1016/j.snb.2019.126886Measurements of the composition of multiphase flows, especially water-cut in oil-water flow, is a frequently encountered problem in the petroleum industry. New techniques that can offer improvements towards that are continuously sought and the use of... Read More about Optimised mode selection in electromagnetic sensors for real time, continuous and in-situ monitoring of water cut in multi-phase flow systems.
GluNet: A Deep Learning Framework For Accurate Glucose Forecasting (2019)
Journal Article
Li, K., Liu, C., Zhu, T., Herrero, P., & Georgiou, P. (2019). GluNet: A Deep Learning Framework For Accurate Glucose Forecasting. IEEE Journal of Biomedical and Health Informatics, 24(2), 414-423. https://doi.org/10.1109/jbhi.2019.2931842For people with Type 1 diabetes (T1D), forecasting of \red{blood glucose (BG)} can be used to effectively avoid hyperglycemia, hypoglycemia and associated complications. The latest continuous glucose monitoring (CGM) technology allows people to obser... Read More about GluNet: A Deep Learning Framework For Accurate Glucose Forecasting.
An Improved Three-Phase Buck Rectifier Topology with Reduced Voltage Stress on Transistors (2019)
Journal Article
Lei, J., Feng, S., Zhao, J., Chen, W., Wheeler, P., & Shi, M. (2020). An Improved Three-Phase Buck Rectifier Topology with Reduced Voltage Stress on Transistors. IEEE Transactions on Power Electronics, 35(3), 2458-2466. https://doi.org/10.1109/tpel.2019.2931803The three-phase buck rectifier (3ph-BR) is suitable for applications where a voltage step down function is required. In this paper, an improved 3ph-BR topology is proposed to reduce the voltage stress on the transistors. The freewheeling diode in the... Read More about An Improved Three-Phase Buck Rectifier Topology with Reduced Voltage Stress on Transistors.
Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior (2019)
Journal Article
Vaithilingam, J., Sanjuan‐Alberte, P., Campora, S., Rance, G. A., Jiang, L., Thorpe, J., Burroughs, L., Tuck, C. J., Denning, C., Wildman, R. D., Hague, R. J. M., Alexander, M. R., & Rawson, F. J. (2019). Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior. Advanced Functional Materials, 29(38), Article 1902016. https://doi.org/10.1002/adfm.201902016Biological structures control cell behavior via physical, chemical, electrical, and mechanical cues. Approaches that allow us to build devices that mimic these cues in a combinatorial way are lacking due to there being no suitable instructive materia... Read More about Multifunctional Bioinstructive 3D Architectures to Modulate Cellular Behavior.
Life cycle cost of flexible pavements and climate variability: case studies from Virginia (2019)
Journal Article
Qiao, Y., Dawson, A., Parry, T., & Flintsch, G. (2019). Life cycle cost of flexible pavements and climate variability: case studies from Virginia. Structure and Infrastructure Engineering, 15(12), 1665-1679. https://doi.org/10.1080/15732479.2019.1642364Climate factors have not become a typical metric to consider for pavement life cycle cost analysis (LCCA). Changes in climate may affect pavement rutting, roughness, and cracking and lead to consequent changes in maintenance decision-making and life... Read More about Life cycle cost of flexible pavements and climate variability: case studies from Virginia.
Feel the noise: Mid-air ultrasound haptics as a novel human-vehicle interaction paradigm (2019)
Journal Article
Large, D., Harrington, K., Burnett, G., & Georgiou, O. (2019). Feel the noise: Mid-air ultrasound haptics as a novel human-vehicle interaction paradigm. Applied Ergonomics, 81, Article 102909. https://doi.org/10.1016/j.apergo.2019.102909Focussed ultrasound can be used to create the sensation of touch in mid-air. Combined with gestures, this can provide haptic feedback to guide users, thereby overcoming the lack of agency associated with pure gestural interfaces, and reducing the nee... Read More about Feel the noise: Mid-air ultrasound haptics as a novel human-vehicle interaction paradigm.
A novel criterion for the prediction of meso-scale defects in textile preforming (2019)
Journal Article
Matveev, M. Y., Endruweit, A., De Focatiis, D. S., Long, A. C., & Warrior, N. A. (2019). A novel criterion for the prediction of meso-scale defects in textile preforming. Composite Structures, 226, Article 111263. https://doi.org/10.1016/j.compstruct.2019.111263© 2019 The Authors In numerical simulations of reinforcement preforming, fabrics are often modelled using continuum approaches with homogenised material properties in order to reduce the computational costs. To predict the occurrence of meso-scale de... Read More about A novel criterion for the prediction of meso-scale defects in textile preforming.