Outputs (187)

A modulated model predictive control scheme for the brushless doubly-fed induction machine (2017)
Presentation / Conference Contribution
Li, X., Peng, T., Dan, H., Zhang, G., Tang, W., & Wheeler, P. (2017, October). A modulated model predictive control scheme for the brushless doubly-fed induction machine. Presented at IEEE Energy Conversion Congress and Exposition (ECCE) 2017, Cincinnatti, OH, USA

This paper proposes a modulated model predictive control (MMPC) algorithm for a brushless double-fed induction machine. The Brushless Doubly-Fed Induction Machine has some important advantages over alternative solutions for brushless machine applicat... Read More about A modulated model predictive control scheme for the brushless doubly-fed induction machine.

Distributed speed control for multi-three phase electrical motors with improved power sharing capability (2017)
Presentation / Conference Contribution
Galassini, A., Costabeber, A., Gerada, C., & Tessarolo, A. Distributed speed control for multi-three phase electrical motors with improved power sharing capability. Presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE)

This paper proposes a distributed speed control with improved power sharing capability for multi-three phase synchronous machines. This control technique allows the speed to be precisely regulated during power sharing transients among different drive... Read More about Distributed speed control for multi-three phase electrical motors with improved power sharing capability.

Modulated model predictive control for active split DC-bus 4-leg power supply (2017)
Presentation / Conference Contribution
Bifaretti, S., Pipolo, S., Lidozzi, A., Solero, L., Tarisciotti, L., & Zanchetta, P. Modulated model predictive control for active split DC-bus 4-leg power supply. Presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE)

This paper proposes a constant switching frequency Finite Control Set Model Predictive Control (FCS-MPC), formally Modulated FCS-MPC or M2PC, for a 4-leg inverter having an Active Split DC-bus on the fourth leg. The great advantage of MPC over linear... Read More about Modulated model predictive control for active split DC-bus 4-leg power supply.

Design optimization of a high-speed synchronous reluctance machine (2017)
Journal Article
Di Nardo, M., Lo Calzo, G., Galea, M., & Gerada, C. (2018). Design optimization of a high-speed synchronous reluctance machine. IEEE Transactions on Industry Applications, 54(1), 233-243. https://doi.org/10.1109/TIA.2017.2758759

Synchronous reluctance machines, including the per¬manent magnet assisted variants are competitive motor topologies if the application requires high efficiency and a cost effective solution with a high flux weakening capability. However, increas¬ing... Read More about Design optimization of a high-speed synchronous reluctance machine.

Matrix converter open circuit fault diagnosis with asymmetric one zero SVM (2017)
Presentation / Conference Contribution
Zhang, J., Empringham, L., De Lillo, L., Dan, H., & Wheeler, P. Matrix converter open circuit fault diagnosis with asymmetric one zero SVM. Presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE)

An open-circuit fault detection and diagnosis strategy for a direct matrix converter is proposed in this paper. The current recirculating path during an open circuit condition is considered in detail with the aim of contributing more expert knowledge... Read More about Matrix converter open circuit fault diagnosis with asymmetric one zero SVM.

Time-Efficient Sintering Processes to Attach Power Devices Using Nanosilver Dry Film (2017)
Journal Article
Dai, J., Li, J., Agyakwa, P., & Johnson, C. M. (2017). Time-Efficient Sintering Processes to Attach Power Devices Using Nanosilver Dry Film. Journal of Microelectronics and Electronic Packaging, 14(4), 140-149. https://doi.org/10.4071/imaps.521776

Pressure-assisted sintering processes to attach power devices using wet nanosilver pastes with time scales of minutes to a few hours have been widely reported. This paper presents our work on time-efficient sintering, using nanosilver dry film and an... Read More about Time-Efficient Sintering Processes to Attach Power Devices Using Nanosilver Dry Film.

ESBC: an enhanced modular multilevel converter with H-bridge front end (2017)
Presentation / Conference Contribution
Amankwah, E., Costabeber, A., Jasim, O., Trainer, D., & Clare, J. C. ESBC: an enhanced modular multilevel converter with H-bridge front end. Presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE)

This paper presents the Enhanced Series Bridge Converter (ESBC), a hybrid modular multilevel converter with H-bridge front end suitable for high power grid applications. It retains the advantages of other modular multilevel topologies while offering... Read More about ESBC: an enhanced modular multilevel converter with H-bridge front end.

Comparative study of novel tubular flux-reversal transverse flux permanent magnet linear machine (2017)
Presentation / Conference Contribution
Zhu, S., Cox, T., & Gerada, C. Comparative study of novel tubular flux-reversal transverse flux permanent magnet linear machine. Presented at 2017 IEEE Energy Conversion Congress and Exposition (ECCE)

This paper presents a novel tubular flux-reversal transverse flux permanent magnet linear machine (FR-TFPMLM), in which both magnet and armature winding are located at the short primary side whereas the secondary side is composed of only magnetic ste... Read More about Comparative study of novel tubular flux-reversal transverse flux permanent magnet linear machine.

Combining fault location estimates for a multi-tapped distribution line (2017)
Presentation / Conference Contribution
Jahanger, H., Sumner, M., & Thomas, D. W. Combining fault location estimates for a multi-tapped distribution line. Presented at ISGT Europe 2017

Multi-tapped lines are common in integrated power systems and microgrids which supply variable loads between the main source and the main load. Adopting a cost effective and efficient method for fault location is important for fast power recovery and... Read More about Combining fault location estimates for a multi-tapped distribution line.

Co-design/simulation of flip-chip assembly for high voltage IGBT packages (2017)
Presentation / Conference Contribution
Rajaguru, P., Bailey, C., Aliyu, A. M., Castellazzi, A., Pathirana, V., Udugampola, N., Trajkovic, T., Udrea, F., Mitchelson, P., & Elliot, A. Co-design/simulation of flip-chip assembly for high voltage IGBT packages. Presented at 23rd International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2017

This paper details a co-design and modelling methodology to optimise the flip-chip assembly parameters so that the overall package and system meets performance and reliability specifications for LED lighting applications. A co-design methodology is e... Read More about Co-design/simulation of flip-chip assembly for high voltage IGBT packages.