Miss NEGAR GILANI's Outputs (8)

Inkjet Printing of Heterostructures: Investigation and Strategies for Control of Interfaces (2025)
Journal Article
Austin, J. S., Zhou, Y., Rivers, G., Gilani, N., Wang, F., Tuck, C. J., Gilmore, I. S., Hague, R. J. M., Trindade, G. F., & Turyanska, L. (2025). Inkjet Printing of Heterostructures: Investigation and Strategies for Control of Interfaces. ACS Applied Materials and Interfaces, 17(11), 17230-17237. https://doi.org/10.1021/acsami.4c21170

Development of printed electronics requires understanding and control of the interfaces in heterostructure devices. However, investigation of the interfaces between dissimilar materials to achieve control of intermixing presents challenges. Here, we... Read More about Inkjet Printing of Heterostructures: Investigation and Strategies for Control of Interfaces.

Drop-on-demand metal jetting of pure copper: On the interaction of molten metal with ceramic and metallic substrates (2024)
Journal Article
Gilani, N., Aboulkhair, N. T., Simonelli, M., East, M., & Hague, R. J. (2024). Drop-on-demand metal jetting of pure copper: On the interaction of molten metal with ceramic and metallic substrates. Materials and Design, 240, Article 112834. https://doi.org/10.1016/j.matdes.2024.112834

Copper, renowned for its exceptional electrical and thermal conductivity at a low cost, holds great promise in electronic applications. While additive manufacturing of copper has attracted interest, the exploration of applying Drop-on-demand Metal Je... Read More about Drop-on-demand metal jetting of pure copper: On the interaction of molten metal with ceramic and metallic substrates.

Off the Grid: a new strategy for material-jet 3D printing with enhanced sub-droplet resolution (2023)
Journal Article
Nelson-Dummett, O., Rivers, G., Gilani, N., Simonelli, M., Tuck, C. J., Wildman, R. D., Hague, R. J., & Turyanska, L. (2024). Off the Grid: a new strategy for material-jet 3D printing with enhanced sub-droplet resolution. Additive Manufacturing Letters, 8, Article 100185. https://doi.org/10.1016/j.addlet.2023.100185

Drop-on-Demand additive manufacturing could offer a facile solution for scalable on-site manufacturing. With an increasing number of functional materials available for this technology, there are growing opportunities for applications, such as electro... Read More about Off the Grid: a new strategy for material-jet 3D printing with enhanced sub-droplet resolution.

Material Jetting (2023)
Book Chapter
Gilani, N., Foerster, A., & Aboulkhair, N. T. (2023). Material Jetting. In E. Pei, A. Bernard, D. Gu, C. Klahn, M. Monzón, M. Petersen, & T. Sun (Eds.), Springer Handbook of Additive Manufacturing (371-387). Springer. https://doi.org/10.1007/978-3-031-20752-5_23

Material jetting is a process whereby a 3D structure can be manufactured using either a continuous jet or drop-on-demand jet. Material is transformed into a liquid state and actuated for a stream of material or droplets to be generated and ejected th... Read More about Material Jetting.

Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents (2023)
Journal Article
Rivers, G., Austin, J. S., He, Y., Thompson, A., Gilani, N., Roberts, N., Zhao, P., Tuck, C. J., Hague, R. J., Wildman, R. D., & Turyanska, L. (2023). Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents. Additive Manufacturing, 66, Article 103452. https://doi.org/10.1016/j.addma.2023.103452

Development of conductive polymer ink formulations with reliable jetting stability and physical properties could offer sustainable routes for scaling-up the 3D-printing of electronics. We report a new poly(3,4-ethylenedioxythiophene) polystyrene sulp... Read More about Stable large area drop-on-demand deposition of a conductive polymer ink for 3D-printed electronics, enabled by bio-renewable co-solvents.

Additive manufacturing processes for metals (2023)
Book Chapter
Aboulkhair, N. T., Bosio, F., Gilani, N., Phutela, C., Hague, R. J., & Tuck, C. J. (2023). Additive manufacturing processes for metals. In Quality Analysis of Additively Manufactured Metals: Simulation Approaches, Processes, and Microstructure Properties (201-258). Elsevier. https://doi.org/10.1016/b978-0-323-88664-2.00016-6

Additive manufacturing (AM) processes are a family of net-shaped manufacturing systems that are widely being used and adopted for their distinctive characteristics. Recently, AM processes have positioned themselves to be worthy of playing a role in r... Read More about Additive manufacturing processes for metals.

From impact to solidification in drop-on-demand metal additive manufacturing using MetalJet (2022)
Journal Article
Gilani, N., Aboulkhair, N. T., Simonelli, M., East, M., Ashcroft, I. A., & Hague, R. J. (2022). From impact to solidification in drop-on-demand metal additive manufacturing using MetalJet. Additive Manufacturing, 55, Article 102827. https://doi.org/10.1016/j.addma.2022.102827

Drop-on-demand metal jetting is a promising additive manufacturing (AM) technology that is gaining interest due to its capability to directly print complex single and multi-material components at high resolutions. It also has key advantages over othe... Read More about From impact to solidification in drop-on-demand metal additive manufacturing using MetalJet.

Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study (2021)
Journal Article
Gilani, N., Aboulkhair, N. T., Simonelli, M., East, M., Ashcroft, I., & Hague, R. J. (2021). Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study. Additive Manufacturing, 48(Part B), Article 102402. https://doi.org/10.1016/j.addma.2021.102402

Drop-on-demand metal jetting is a recent additive manufacturing technology opening new opportunities for the fabrication of complex single and multi-metal components. MetalJet, the Océ developed technique used in this study, has the capacity to produ... Read More about Insights into drop-on-demand metal additive manufacturing through an integrated experimental and computational study.