Machine learning-based envelope extraction from downsampled coherence scanning interferometry signal data
(2024)
Presentation / Conference Contribution
Xue, R., Hooshmand, H., Isa, M., & Leach, R. (2024, September). Machine learning-based envelope extraction from downsampled coherence scanning interferometry signal data. Presented at Special Interest Conference: Structured & Freeform Surfaces, Nottingham, UK
Professor RICHARD LEACH's Outputs (28)
Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process (2020)
Journal Article
Palma, V., Goodall, R., Thompson, A., Ruocco, C., Renda, S., Leach, R., & Martino, M. (2021). Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process. International Journal of Hydrogen Energy, 46(22), 12158-12168. https://doi.org/10.1016/j.ijhydene.2020.04.065A study on the use of chemical conversion coating as a preparative technique for foam-based structured catalysts, in the water gas shift reaction, is presented. The results showed a significant correlation between the textural properties of the struc... Read More about Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process.
Mechanical vibration bandgaps in surface-based lattices (2018)
Journal Article
Elmadih, W., Syam, W. P., Maskery, I., Chronopoulos, D., & Leach, R. (2019). Mechanical vibration bandgaps in surface-based lattices. Additive Manufacturing, 25, 421-429. https://doi.org/10.1016/j.addma.2018.11.011In this paper, the phonon dispersion curves of several surface-based lattices are examined, and their energy transmission spectra, along with the corresponding bandgaps are identified. We demonstrate that these bandgaps may be controlled, or tuned, t... Read More about Mechanical vibration bandgaps in surface-based lattices.
Artificial intelligence-enhanced multi-material form measurement for additive materials (2018)
Presentation / Conference Contribution
Stavroulakis, P., Davies, O., Tzimiropoulos, G., & Leach, R. (2018, August). Artificial intelligence-enhanced multi-material form measurement for additive materials. Paper presented at Solid Freeform Fabrication Symposium, Austin, Texas, USA
A self-calibration rotational stitching method for precision measurement of revolving surfaces (2018)
Journal Article
Liu, M., Cheung, C., Feng, X., Wang, C., & Leach, R. (in press). A self-calibration rotational stitching method for precision measurement of revolving surfaces. Precision Engineering, https://doi.org/10.1016/j.precisioneng.2018.05.002When measuring revolving objects, it is often desired to obtain not only the geometrical form of the workpiece, but also the topography of the surface, as they both affect the performance of the part. However, holistic measurement of the entire three... Read More about A self-calibration rotational stitching method for precision measurement of revolving surfaces.
Hierarchical-information-based characterization of multiscale structured surfaces (2018)
Journal Article
Cheung, C. F., Liu, M., Leach, R., Feng, X., & Zhao, C. (2018). Hierarchical-information-based characterization of multiscale structured surfaces. CIRP Annals - Manufacturing Technology, 67(1), 539-542. https://doi.org/10.1016/j.cirp.2018.04.002© 2018 This paper presents a hierarchical-information-based characterization method for multiscale structured surfaces. The method makes use of a priori information of the multiscale surface and a hierarchical segmentation–registration (HSR) algorith... Read More about Hierarchical-information-based characterization of multiscale structured surfaces.
Noise evaluation of a point autofocus surface topography measuring instrument (2018)
Journal Article
Maculotti, G., Feng, X., Galetto, M., & Leach, R. K. (2018). Noise evaluation of a point autofocus surface topography measuring instrument. Measurement Science and Technology, 29(6), https://doi.org/10.1088/1361-6501/aab528In this work, the measurement noise of a point autofocus surface topography measuring instrument is evaluated, as the first step towards establishing a route to traceability for this type of instrument. The evaluation is based on the determination of... Read More about Noise evaluation of a point autofocus surface topography measuring instrument.
3-dimensional inkjet printing of macro structures from silver nanoparticles (2017)
Journal Article
Vaithilingam, J., Saleh, E., Körner, L., Wildman, R. D., Hague, R. J., Leach, R. K., & Tuck, C. J. (2018). 3-dimensional inkjet printing of macro structures from silver nanoparticles. Materials and Design, 139, https://doi.org/10.1016/j.matdes.2017.10.070The adoption of additive manufacturing technology is gaining interest for processing precious metals. In this study, the capability of inkjet printing was explored to fabricate macroscopic parts from commercial silver nanoparticle ink (AgNPs). A besp... Read More about 3-dimensional inkjet printing of macro structures from silver nanoparticles.
Characterisation of the topography of metal additive surface features with different measurement technologies (2017)
Journal Article
Senin, N., Thompson, A., & Leach, R. K. (2017). Characterisation of the topography of metal additive surface features with different measurement technologies. Measurement Science and Technology, 28(9), Article 095003. https://doi.org/10.1088/1361-6501/aa7ce2© 2017 IOP Publishing Ltd. The challenges of measuring the surface topography of metallic surfaces produced by additive manufacturing are investigated. The differences between measurements made using various optical and non-optical technologies, incl... Read More about Characterisation of the topography of metal additive surface features with different measurement technologies.
The application of composite through-thickness assessment to additively manufactured structures (2017)
Presentation / Conference Contribution
Bitar, I., Aboulkhair, N., & Leach, R. (2017, August). The application of composite through-thickness assessment to additively manufactured structures. Presented at 28th Annual International Solid Freeform Fabrication SymposiumThis study looks into the applicability of through-thickness assessment to additive manufacturing (AM) carbon-fibre reinforced polymers (CFRPs). The study utilised a material extrusion printer that uses fused filament fabrication and composite filame... Read More about The application of composite through-thickness assessment to additively manufactured structures.
Staged thermomechanical testing of nickel superalloys produced by selective laser melting (2017)
Journal Article
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. (2017). Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials and Design, 133, 520-527. https://doi.org/10.1016/j.matdes.2017.08.009The creep performance of additively manufactured components remains an issue before additive manufacturing can be put fully implemented. In this study, Inconel 718 two-bar specimens are produced by selective laser melting and subjected to a ‘staged’... Read More about Staged thermomechanical testing of nickel superalloys produced by selective laser melting.
Focus variation measurement of electron beam melted surfaces (2017)
Presentation / Conference Contribution
Newton, L., Senin, N., & Leach, R. Focus variation measurement of electron beam melted surfaces. Presented at 16th Conference on Metrology and properties of Engineering SurfacesElectron beam melting (EBM) is a promising additive manufacturing process which is seeing increasing use in high value manufacturing sectors such as aerospace [1]. With its layer-by-layer approach, EBM can allow the creation of parts of complex shape... Read More about Focus variation measurement of electron beam melted surfaces.
Measurement noise of a point autofocus surface topography instrument (2017)
Presentation / Conference Contribution
Feng, X., Quagliotti, D., Maculotti, G., Syam, W. P., Tosello, G., Hansen, H. N., Galetto, M., & Leach, R. Measurement noise of a point autofocus surface topography instrument. Presented at 16th Conference on Metrology and properties of Engineering SurfacesOptical instruments for areal topography measurement can be especially sensitive to noise when scanning is required. Such noise has different sources, including those internally generated and external sources from the environment [1].For some instrum... Read More about Measurement noise of a point autofocus surface topography instrument.
Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability (2017)
Presentation / Conference Contribution
Alburayt, A., Syam, W. P., & Leach, R. Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability. Presented at 16th Conference on Metrology and Properties of Engineering SurfacesMeasurement noise is one of the ISO-proposed metrological characteristics of areal surface texture instruments [1, 2, 3, 4]. Measurement noise includes all of the unwanted contributions to the output signals when the instrument is used in its normal... Read More about Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability.
Coherence scanning interferometry for additive manufacture (2017)
Presentation / Conference Contribution
Gomez, C., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. Coherence scanning interferometry for additive manufacture. Presented at 16th Conference on Metrology and properties of Engineering SurfacesAdditive manufacture (AM) of metal components is a rapidly maturing technology; but given the large number of interrelated process parameters, it remains difficult to control to high precision. It has been observed that processing conditions may be a... Read More about Coherence scanning interferometry for additive manufacture.
An industrial survey on the use of surface texture parameters (2017)
Presentation / Conference Contribution
Todhunter, L. D., Leach, R., & Lawes, S. D. An industrial survey on the use of surface texture parameters. Presented at 16th Conference on Metrology and properties of Engineering SurfacesIn 1999, CIRP conducted an industrial survey of the use of surface texture parameters [1]. In the seventeen years since, much has changed, with the most important advancement being the introduction of areal surface texture parameters as described in... Read More about An industrial survey on the use of surface texture parameters.
X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement (2017)
Presentation / Conference Contribution
Thompson, A., Körner, L., Senin, N., Lawes, S., Leach, R., & Maskery, I. X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement. Presented at 16th Conference on Metrology and properties of Engineering SurfacesX-ray computed tomography (XCT) has recently become recognised as a viable method of surface topography measurement for additively manufactured (AM) metal parts [1–5]. AM is capable of producing internal features that are inaccessible to other surfac... Read More about X-ray computed tomography of additively manufactured metal parts: the effect of magnification and reconstruction sampling on surface topography measurement.
X-ray computed tomography and additive manufacturing in medicine: a review (2017)
Journal Article
Thompson, A., McNally, D., Maskery, I., & Leach, R. K. (in press). X-ray computed tomography and additive manufacturing in medicine: a review. International Journal of Metrology and Quality Engineering, 8, Article 17. https://doi.org/10.1051/ijmqe/2017015The use of X-ray computed tomography (XCT) with additive manufacture (AM) within a medical context is examined in this review. The seven AM process families and various XCT scanning techniques are explained in brief, and the use of these technologies... Read More about X-ray computed tomography and additive manufacturing in medicine: a review.
Verification of micro-scale photogrammetry for smooth three-dimensional object measurement (2017)
Journal Article
Sims-Waterhouse, D., Piano, S., & Leach, R. (2017). Verification of micro-scale photogrammetry for smooth three-dimensional object measurement. Measurement Science and Technology, 28(5), Article 055010. https://doi.org/10.1088/1361-6501/aa6364© 2017 IOP Publishing Ltd. By using sub-millimetre laser speckle pattern projection we show that photogrammetry systems are able to measure smooth three-dimensional objects with surface height deviations less than 1 μm. The projection of laser speckl... Read More about Verification of micro-scale photogrammetry for smooth three-dimensional object measurement.
Shape descriptors and statistical classification on areal topography data for tile inspection in tessellated surfaces (2016)
Journal Article
Senin, N., Moretti, M., & Leach, R. K. (2017). Shape descriptors and statistical classification on areal topography data for tile inspection in tessellated surfaces. Measurement, 95, https://doi.org/10.1016/j.measurement.2016.09.044Verification of conformance to design specifications in production, and identification of defects related to wear or other damage during maintenance, are key metrological aspects that must be addressed for micro-scale tessellated surfaces. A new algo... Read More about Shape descriptors and statistical classification on areal topography data for tile inspection in tessellated surfaces.