Dr GAURANG VAKIL's Outputs (50)

Impact of Single and Combined Faults Composed of Rotor Eccentricity and Stator Interturn Short Circuit on Electromagnetic Torque Ripples in Synchronous Generator (2020)
Journal Article
He, Y. L., Zhang, Z. J., Wang, X. L., Gao, P., Gerada, D., Gerada, C., & Vakil, G. (2020). Impact of Single and Combined Faults Composed of Rotor Eccentricity and Stator Interturn Short Circuit on Electromagnetic Torque Ripples in Synchronous Generator. Complexity, 2020, Article 535421. https://doi.org/10.1155/2020/8535421

In order to comprehensively study and identify the electromagnetic torque (EMT) difference among the single static air-gap eccentricity (SAGE) fault, the single stator interturn short circuit fault (SISC), and the combined fault composed of these two... Read More about Impact of Single and Combined Faults Composed of Rotor Eccentricity and Stator Interturn Short Circuit on Electromagnetic Torque Ripples in Synchronous Generator.

A Framework for Optimization of Hybrid Aircraft (2019)
Presentation / Conference Contribution
Zhao, X., Sahoo, S., Kyprianidis, K., Sumsurooah, S., Valente, G., Rashed, M., Vakil, G., Hill, C. I., Jacob, C., Gobbin, A., Bardenhagen, A., Prölss, K., Sielemann, M., Rantzer, J., & Ekstedt, E. (2019, June). A Framework for Optimization of Hybrid Aircraft. Presented at ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, Arizona, USA

To achieve the goals of substantial improvements in efficiency and emissions set by Flightpath 2050, fundamentally different concepts are required. As one of the most promising solutions, electrification of the aircraft primary propulsion is currentl... Read More about A Framework for Optimization of Hybrid Aircraft.

Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions (2019)
Presentation / Conference Contribution
Khowja, M. R., Vakil, G., & Gerada, C. (2019, October). Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions. Presented at IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal

This paper presents an analytical tool to generate torque vs speed characteristics of the surface-mounted permanent magnet machines to minimize the computation time and efforts. The paper also derives an expression of d-axis current in the field weak... Read More about Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions.

Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application (2019)
Presentation / Conference Contribution
Al-Ani, M., Walker, A., Vakil, G., Ramanathan, R., Zou, T., La Rocca, S., La Rocca, A., Gerada, D., Gerada, C., Paciura, K., & McQueen, A. (2019, October). Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application. Presented at IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal

Recently, the synchronous reluctance machine limits have been pushed toward meeting the requirements of traction applications. A skilled electromagnetic architecture of a synchronous reluctance machine with the help of permanent magnets can push the... Read More about Multi-physics Design Optimisation of PM-assisted Synchronous Reluctance Motor for Traction Application.

Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator (2019)
Journal Article
He, Y.-L., Xu, M.-X., Xiong, J., Sun, Y.-X., Wang, X.-L., Gerada, D., & Vakil, G. (2019). Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator. IEEE Access, 7, 100813-100823. https://doi.org/10.1109/access.2019.2929868

This paper presents a comprehensive study on the variation laws of electromagnetic torque (EMT) under static air-gap eccentricity (SAGE) conditions in synchronous generators. Different from other studies, this paper focuses on not only the impact of... Read More about Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator.

Sizing, design, and modelling of aerospace electric drive system with long feeder cables (2019)
Presentation / Conference Contribution
Xie, P., Vakil, G., & Gerarda, C. (2019, May). Sizing, design, and modelling of aerospace electric drive system with long feeder cables. Presented at IEMDC 2019 - International Electric Machines & Drives Conference, San Diego, California, USA

The aviation industry is tending towards more electric aircraft, replacing conventionally pneumatic, hydraulic, and mechanical systems with electrical solutions. The electrification of actuators is motivated by increased efficiency, reduced maintenan... Read More about Sizing, design, and modelling of aerospace electric drive system with long feeder cables.

Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines (2019)
Presentation / Conference Contribution
Xie, P., Ramanathan, R., Vakil, G., & Gerada, C. (2019, May). Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines. Presented at IEMDC 2019 - International Electric Machines & Drives Conference, San Diego, California, USA

This paper proposes a simple analytical machine sizing process for a three-phase surface mounted permanent magnet synchronous machines appropriate for both system level analysis and preliminary machine design. For system-level analysis, the proposed... Read More about Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines.

Novel Motor-Shaped Rotational Inductor for Motor Drive Applications (2019)
Journal Article
Odhano, S., Khowja, M. R., Gerada, C., Vakil, G., Abebe, R., Odhano, S. A., Patel, C., & Wheeler, P. (2020). Novel Motor-Shaped Rotational Inductor for Motor Drive Applications. IEEE Transactions on Industrial Electronics, 67(3), 1844-1854. https://doi.org/10.1109/tie.2019.2907512

This paper presents a validation of the novel motor-shaped rotational inductor. To validate the concept, 12 slots 2 poles rotational inductor is tested at different supply frequencies and rotor speeds. Experimental results have shown that the iron lo... Read More about Novel Motor-Shaped Rotational Inductor for Motor Drive Applications.

The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft (2018)
Presentation / Conference Contribution
Golovanov, D., Xu, Z., Gerada, D., Degano, M., Vakil, G., & Gerada, C. (2018, October). The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft. Presented at 2018 21st International Conference on Electrical Machines and Systems (ICEMS), Jeju, South Korea

Maximizing the power density as well as efficiency are two of the main critical aspects for engineers who are designing electrical machines for aerospace applications. Iron losses have a significant impact on the total machine efficiency, thermal sta... Read More about The Influence of Stator Material on the Power Density and Iron Loss of a High-Performace Starter-Generator for More Electric Aircraft.

Methods of torque ripple reduction for flux reversal motor (2009)
Journal Article
Vakil, G., Sheth, N. K., & Miller, D. (2009). Methods of torque ripple reduction for flux reversal motor. Journal of Applied Physics, 105(7), Article 07F122. https://doi.org/10.1063/1.3076149

This paper presents two-dimensional finite element based results for various methods of torque ripple reduction in flux-reversal motors. The effects of variation in magnet and rotor pole heights, rotor pole skewing, and multiple teeth per rotor pole... Read More about Methods of torque ripple reduction for flux reversal motor.