Professor ADAM CLARE's Outputs (10)

Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing (2018)
Presentation / Conference Contribution
Milesh Pieris, D., Patel, R., Dryburgh, P., Hirsch, M., Li, W., Sharples, S. D., Smith, R. J., Clare, A. T., & Clark, M. (2018, September). Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing. Presented at NDT 2018 - 57th Annual Conference of the British Institute of Non-Destructive Testing, Nottingham, UK

High-integrity engineering applications such as aerospace will not permit the incorporation of components containing any structural defects. The current generation of additive manufacturing platforms yield components with relatively high levels of... Read More about Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing.

A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718 (2018)
Journal Article
Walker, T., Bennett, C., Lee, T., & Clare, A. (2019). A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718. International Journal of Mechanical Sciences, 151, 609-621. https://doi.org/10.1016/j.ijmecsci.2018.12.004

Direct Energy Deposition (DED) is being increasingly used to repair high value components that have been damaged in-service. The uptake of DED and laser cladding operations for repair is inhibited by accurate modelling techniques. Often the repair pr... Read More about A validated analytical-numerical modelling strategy to predict residual stresses in single-track laser deposited IN718.

Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy (2018)
Journal Article
Patel, R., Hirsch, M., Dryburgh, P., Pieris, D., Achamfuo-Yeboah, S., Smith, R., Light, R., Sharples, S., Clare, A., & Clark, M. (2018). Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy. Applied Sciences, 8(10), Article 1991. https://doi.org/10.3390/app8101991

Additive manufacturing (AM) is a production technology where material is accumulated to create a structure, often through added shaped layers. The major advantage of additive manufacturing is in creating unique and complex parts for use in areas wher... Read More about Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy.

The importance of microstructure in electrochemical jet processing (2018)
Journal Article
Speidel, A., Mitchell-Smith, J., Bisterov, I., & Clare, A. T. (2018). The importance of microstructure in electrochemical jet processing. Journal of Materials Processing Technology, 262, 459-470. https://doi.org/10.1016/j.jmatprotec.2018.07.022

© 2018 Electrochemical jet processing (EJP) is an athermal technique facilitating precision micromachining and surface preparation, without recast layer generation. The role of the microstructure in determining machining characteristics has been larg... Read More about The importance of microstructure in electrochemical jet processing.

Targeted rework of powder bed fusion additive manufacturing (2018)
Presentation / Conference Contribution
Dryburgh, P., Patel, R., Catchpole-Smith, S., Hirsch, M., Parry, L., Smith, R. J., Clark, M., Ashcroft, I. A., & Clare, A. T. (2018, June). Targeted rework of powder bed fusion additive manufacturing. Presented at 19th International Symposium on Laser Precision Microfabrication

There is a clear industrial pull to fabricate high value components using premium high temperature aerospace materials by additive manufacturing. Inconveniently, the same materials’ properties which allow them to perform well in service render them... Read More about Targeted rework of powder bed fusion additive manufacturing.

The effects of vibration on fringe projection systems (2018)
Presentation / Conference Contribution
Bointon, P., Todhunter, L., Stavroulakis, P., Clare, A., & Leach, R. The effects of vibration on fringe projection systems. Presented at euspen’s 18th International Conference & Exhibition

Mechanical vibration noise is a significant source of error in precision measuring instruments. Errors due to vibration can be detected in measurement signals, and so methods to control mechanical vibration must be considered throughout the design pr... Read More about The effects of vibration on fringe projection systems.

Effects of vibration on fringe projection systems (2018)
Presentation / Conference Contribution
Bointon, P., Todhunter, L., Stavroulakis, P., Clare, A., & Leach, R. (2018, June). Effects of vibration on fringe projection systems. Paper presented at euspen 18th International Conference & Exhibition

A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks (2018)
Journal Article
Simonelli, M., Aboulkhair, N. T., Cohen, P., Murray, J. W., Clare, A. T., Tuck, C., & Hague, R. J. (in press). A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks. Materials Characterization, https://doi.org/10.1016/j.matchar.2018.05.039

In-situ alloying within laser powder-bed fusion, specifically Selective Laser Melting (SLM), has been investigated for the formulation of novel alloys from elemental powders to extend the benefits offered by these technologies. Inadequate preparation... Read More about A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks.

Modelling and Characterisation of Electrical Discharge TiC-Fe Cermet Coatings (2018)
Journal Article
Algodi, S. J., Murray, J. W., Brown, P. D., & Clare, A. T. (2018). Modelling and Characterisation of Electrical Discharge TiC-Fe Cermet Coatings. Procedia CIRP, 68, 28-33. https://doi.org/10.1016/j.procir.2017.12.017

The creation of coatings via Electrical Discharge (ED) methods can enhance the functionality of components which are subject to prior ED machining process steps. However, the industrial application of these methods has been limited due to poor unders... Read More about Modelling and Characterisation of Electrical Discharge TiC-Fe Cermet Coatings.

The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes (2018)
Journal Article
Xu, Z., Dunleavey, J., Antar, M., Hood, R., Soo, S., Kucukturk, G., Hyde, C., & Clare, A. (2018). The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes. International Journal of Fatigue, 111, https://doi.org/10.1016/j.ijfatigue.2018.02.022

Machining processes are known to drastically impact the performance and lifetime of a component subjected to fatigue in service. Therefore, understanding the effect of manufacturing processes on surface integrity is vital to determine their suitabili... Read More about The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes.