Skip to main content

Research Repository

Advanced Search

All Outputs (18)

SLAMB&MAI: a comprehensive methodology for SLAM benchmark and map accuracy improvement (2024)
Journal Article
Liu, S., Sun, E., & Dong, X. (2024). SLAMB&MAI: a comprehensive methodology for SLAM benchmark and map accuracy improvement. Robotica, https://doi.org/10.1017/S0263574724000079

SLAM Benchmark plays a pivotal role in the field by providing a common ground for performance evaluation. In this paper, a novel methodology of simultaneous localization and mapping benchmark and map accuracy improvement (SLAMB&MAI) is introduced. It... Read More about SLAMB&MAI: a comprehensive methodology for SLAM benchmark and map accuracy improvement.

Efficient and Scalable Inverse Kinematics for Continuum Robots (2023)
Journal Article
Wild, S., Zeng, T., Mohammad, A., Billingham, J., Axinte, D., & Dong, X. (2024). Efficient and Scalable Inverse Kinematics for Continuum Robots. IEEE Robotics and Automation Letters, 9(1), 375 - 381. https://doi.org/10.1109/lra.2023.3331291

With their flexible nature, continuum robots offer hyper-redundancy regarding their workspace; their backbone can take many shapes upon a single tip position and orientation. Deciphering which backbone shape to use under certain conditions is crucial... Read More about Efficient and Scalable Inverse Kinematics for Continuum Robots.

Continuum Robots: An Overview (2023)
Journal Article
Russo, M., Sadati, S. H., Dong, X., Mohammad, A., Walker, I. D., Bergeles, C., …Axinte, D. A. (2023). Continuum Robots: An Overview. Advanced Intelligent Systems, 5(5), Article 2200367. https://doi.org/10.1002/aisy.202200367

In this paper, we discuss recent advances, current limitations, and open challenges in the design, modeling, and control of continuum robots. Thanks to their lean bodies, these robots achieve a long reach through narrow and tortuous environments, ena... Read More about Continuum Robots: An Overview.

Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System (2023)
Journal Article
Fang, Y., Dong, X., Mohammad, A., & Axinte, D. (2023). Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System. IEEE/ASME Transactions on Mechatronics, 28(3), 1522-1533. https://doi.org/10.1109/TMECH.2022.3229188

After decades of development, the technology of continuum robots continues to mature gradually and is used for various applications, e.g., inspection and repair in high-value-added industries such as aerospace & nuclear. However, such robots are inva... Read More about Design and Control of a Multiple-Section Continuum Robot With a Hybrid Sensing System.

Tasering Twin Soft Robot: A Multimodal Soft Robot Capable of Passive Flight and Wall Climbing (2022)
Journal Article
Sriratanasak, N., Axinte, D., Dong, X., Mohammad, A., Russo, M., & Raimondi, L. (2022). Tasering Twin Soft Robot: A Multimodal Soft Robot Capable of Passive Flight and Wall Climbing. Advanced Intelligent Systems, 4(12), Article 2200223. https://doi.org/10.1002/aisy.202200223

The application of Soft Crawling Robots (SCRs) to real-world scenarios remains a grand challenge due to their limited deployment time to reach the target and accessibility to difficult-to-reach environments by any obstacles. To overcome these limitat... Read More about Tasering Twin Soft Robot: A Multimodal Soft Robot Capable of Passive Flight and Wall Climbing.

Modelling and experimental study of surface treatment in abrasive waterjet peening of Nickel-based superalloy: Inverse problem (2022)
Journal Article
Wang, Z., Liao, Z., Yang, Y., Dong, X., Augustinavicius, G., Yu, T., & Zhao, J. (2022). Modelling and experimental study of surface treatment in abrasive waterjet peening of Nickel-based superalloy: Inverse problem. Materials and Design, 215, Article 110471. https://doi.org/10.1016/j.matdes.2022.110471

Abrasive waterjet peening (AWJP) is a promising method of surface treatment for modifying mechanical properties of components by introducing compressive residual stress (CRS) to a workpiece surface. Many efforts have been paid so far to modelling and... Read More about Modelling and experimental study of surface treatment in abrasive waterjet peening of Nickel-based superalloy: Inverse problem.

Continuum Robots Collaborate for Safe Manipulation of High-Temperature Flame to Enable Repairs in Challenging Environments (2022)
Journal Article
Dong, X., Wang, M., Mohammad, A. E. K., Ba, W., Russo, M., Norton, A., …Axinte, D. (2022). Continuum Robots Collaborate for Safe Manipulation of High-Temperature Flame to Enable Repairs in Challenging Environments. IEEE/ASME Transactions on Mechatronics, 27(5), 4217-4220. https://doi.org/10.1109/TMECH.2021.3138222

This letter presents two long continuum robots, inserted through small holes, and working collaboratively in a crammed space to manipulate an extreme-temperature (>2000 °C) flame for coating repair on aeroengines without the need of their disassembly... Read More about Continuum Robots Collaborate for Safe Manipulation of High-Temperature Flame to Enable Repairs in Challenging Environments.

Analytical model for predicting residual stresses in abrasive waterjet peening (2021)
Journal Article
Wang, Z., Liao, Z., Axinte, D., Dong, X., Xu, D., & Augustinavicius, G. (2021). Analytical model for predicting residual stresses in abrasive waterjet peening. Materials and Design, 212, Article 110209. https://doi.org/10.1016/j.matdes.2021.110209

Abrasive waterjet peening (AWJP) is a new mechanical surface treatment where particles are delivered by a waterjet to induce plastic deformation and achieve surface strengthening effects on a workpiece. Although fatigue strength can be improved by in... Read More about Analytical model for predicting residual stresses in abrasive waterjet peening.

Task-oriented optimal dimensional synthesis of robotic manipulators with limited mobility (2020)
Journal Article
Russo, M., Raimondi, L., Dong, X., Axinte, D., & Kell, J. (2021). Task-oriented optimal dimensional synthesis of robotic manipulators with limited mobility. Robotics and Computer-Integrated Manufacturing, 69, Article 102096. https://doi.org/10.1016/j.rcim.2020.102096

© 2020 In this article, an optimization method is proposed for the dimensional synthesis of robotic manipulators with limited mobility, i.e. with less than 6 degrees-of-freedom (“DoF”), with a prescribed set of tasks in a constrained environment. Sin... Read More about Task-oriented optimal dimensional synthesis of robotic manipulators with limited mobility.

A Universal Stiffening Sleeve Designed for All Types of Continuum Robot Systems (2020)
Presentation / Conference Contribution
Fang, Y., Bishop, C., Ba, W., Díez, J. B., Mohammad, A., & Dong, X. (2020). A Universal Stiffening Sleeve Designed for All Types of Continuum Robot Systems. In Towards Autonomous Robotic Systems: 21st Annual Conference, TAROS 2020, Nottingham, UK, September 16, 2020, Proceedings (15-24). https://doi.org/10.1007/978-3-030-63486-5_2

© 2020, Springer Nature Switzerland AG. Continuum robots have been utilized for several light-duty applications, such as minimally invasive surgery in the medical field and inspection in the industry. However, the existing design solutions do not off... Read More about A Universal Stiffening Sleeve Designed for All Types of Continuum Robot Systems.

Modeling and Experimental Validation of a Compliant Underactuated Parallel Kinematic Manipulator (2020)
Journal Article
Ma, N., Dong, X., & Axinte, D. (2020). Modeling and Experimental Validation of a Compliant Underactuated Parallel Kinematic Manipulator. IEEE/ASME Transactions on Mechatronics, 25(3), 1409-1421. https://doi.org/10.1109/TMECH.2020.2976140

© 1996-2012 IEEE. Parallel kinematic manipulators (PKMs) are increasingly used in a wide range of industrial applications due to the characteristics of high accuracy and compact structure. However, most of the existing PKMs are structured with heavy... Read More about Modeling and Experimental Validation of a Compliant Underactuated Parallel Kinematic Manipulator.

In-situ repair/maintenance with a continuum robotic machine tool in confined space (2019)
Journal Article
Dong, X., Palmer, D., Axinte, D., & Kell, J. (2019). In-situ repair/maintenance with a continuum robotic machine tool in confined space. Journal of Manufacturing Processes, 38, 313-318. https://doi.org/10.1016/j.jmapro.2019.01.024

In-situ repair/maintenance is critical for the key industry sectors (e.g. aerospace, nuclear), which require prompt interventions. The paper reports on a tendon driven continuum robotic machine tool with high manoeuvrability in navigating and machini... Read More about In-situ repair/maintenance with a continuum robotic machine tool in confined space.

Design and stiffness analysis of A class of 2-DoF tendon driven parallel kinematic mechanism (2018)
Journal Article
Ma, N., Yu, J., Dong, X., & Axinte, D. (2018). Design and stiffness analysis of A class of 2-DoF tendon driven parallel kinematic mechanism. Mechanism and Machine Theory, 129, 202-217. https://doi.org/10.1016/j.mechmachtheory.2018.07.023

2-DoF Rotational mechanism is increasingly utilized in a large range of industrial applications. However, the structures of most of the existing mechanisms are very complex, which is a significant challenge for building them, due to the tight tolera... Read More about Design and stiffness analysis of A class of 2-DoF tendon driven parallel kinematic mechanism.

MiRoR—Miniaturized Robotic Systems for Holistic In-Situ Repair and maintenance works in restrained and hazardous environments (2018)
Journal Article
Axinte, D., Dong, X., Palmer, D., Rushworth, A., Guzman, S. C., Olarra, A., …Kell, J. (2018). MiRoR—Miniaturized Robotic Systems for Holistic In-Situ Repair and maintenance works in restrained and hazardous environments. IEEE/ASME Transactions on Mechatronics, 23(2), 978-981. https://doi.org/10.1109/tmech.2018.2800285

This letter presents the novel concept of a miniaturized robotized machine tool, Mini-RoboMach, consisting of a walking hexapod robot and a Slender Continuum Arm. By combining the mobility of the walking robot with the positioning accuracy of the mac... Read More about MiRoR—Miniaturized Robotic Systems for Holistic In-Situ Repair and maintenance works in restrained and hazardous environments.

Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines (2016)
Journal Article
Dong, X., Axinte, D. A., Palmer, D., Cobos, S., Raffles, M., Rabani, A., & Kell, J. (in press). Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines. Robotics and Computer-Integrated Manufacturing, 44, https://doi.org/10.1016/j.rcim.2016.09.004

The maintenance works (e.g. inspection, repair) of aero-engines while still attached on the airframes requires a desirable approach since this can significantly shorten both the time and cost of such interventions as the aerospace industry commonly o... Read More about Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines.

A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation (2015)
Journal Article
Dong, X., Raffles, M., Cobos-Guzman, S., Axinte, D., & Kell, J. (2016). A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation. Journal of Mechanisms and Robotics, 8(2), Article 021010. https://doi.org/10.1115/1.4031340

A twisting problem is identified from the central located flexible backbone continuum robot. Regarding this problem, a design solution is required to mechanically minimize this twisting angle along the backbone. Further, the error caused by the kinem... Read More about A Novel Continuum Robot Using Twin-Pivot Compliant Joints: Design, Modeling, and Validation.