Skip to main content

Research Repository

Advanced Search

All Outputs (118)

Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication (2016)
Journal Article
Liu, Y., Hu, Q., Zhang, F., Tuck, C., Irvine, D., Hague, R. J., …Wildman, R. D. (2016). Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication. Polymers, 8(9), 1-14. https://doi.org/10.3390/polym8090325

Three dimensional structures prepared from a gold-polymer composite formulation have been fabricated using multiphoton lithography. In this process, gold nanoparticles were simultaneously formed through photoreduction whilst polymerisation of two pos... Read More about Additive manufacture of three dimensional nanocomposite based objects through multiphoton fabrication.

Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing (2016)
Journal Article
Begines, B., Hook, A. L., Alexander, M. R., Tuck, C. J., & Wildman, R. D. (2016). Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing. Rapid Prototyping Journal, 22(5), 835-841. https://doi.org/10.1108/RPJ-11-2015-0175

Purpose: This paper aims to print 3D structures from polymers that resist bacterial attachment by reactive jetting of acrylate monomers.
Design/methodology/approach: The first step towards printing was ink development. Inks were characterised to car... Read More about Development, printability and post-curing studies of formulations of materials resistant to microbial attachment for use in inkjet based 3D printing.

A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing (2016)
Journal Article
He, Y., Tuck, C., Prina, E., Kilsby, S., Christie, S. D., Edmondson, S., …Wildman, R. D. (2017). A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105(6), 1645-1657. https://doi.org/10.1002/jbm.b.33699

A new type of photocrosslinkable polycaprolactone
(PCL)-based ink that is suitable for three-dimensional (3D) inkjet printing has been developed. Photocrosslinkable PCL dimethylacrylate was synthesized and mixed with poly(ethylene glycol) diacrylate... Read More about A new photocrosslinkable polycaprolactone based ink for three dimensional inkjet printing.

The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant (2016)
Journal Article
Badiee, A., Ashcroft, I., & Wildman, R. D. (2016). The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant. International Journal of Adhesion and Adhesives, 68, 212-218. https://doi.org/10.1016/j.ijadhadh.2016.03.008

© 2016 The Authors. Published by Elsevier Ltd. The thermal ageing of an ethylene-vinyl acetate (EVA) polymer used as an adhesive and encapsulant in a photovoltaic module has been investigated. The EVA is used to bond the silicon solar cells to the fr... Read More about The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant.

Surface microstructuring to modify wettability for 3D printing of nano-filled inks (2016)
Journal Article
Vafaei, S., Tuck, C., Ashcroft, I., & Wildman, R. D. (2016). Surface microstructuring to modify wettability for 3D printing of nano-filled inks. Chemical Engineering Research and Design, 109, https://doi.org/10.1016/j.cherd.2016.02.004

This paper investigates the effect of surface wettability on the cross-sectional profiles of printed nanofluid inks which can have a significant role on conductivity of printed lines that are used in the production of printed electronics. Glass subst... Read More about Surface microstructuring to modify wettability for 3D printing of nano-filled inks.

Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications (2016)
Journal Article
Zhang, F., Tuck, C., Hague, R. J., He, Y., Saleh, E., Li, Y., …Wildman, R. D. (2016). Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications. Journal of Applied Polymer Science, https://doi.org/10.1002/APP.43361

In this article, we report the first continuous fabrication of inkjet-printed polyimide films, which were used as insulating layers for the production of capacitors. The polyimide ink was prepared from its precursor poly(amic) acid, and directly prin... Read More about Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications.

Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing? (2016)
Journal Article
Baumers, M., Tuck, C., Wildman, R. D., Ashcroft, I., & Hague, R. J. (in press). Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?. Journal of Industrial Ecology, https://doi.org/10.1111/jiec.12397

Additive manufacturing (AM) technology is capable of building up component geometry in a layer-by-layer process, entirely without tools, molds, or dies. One advantage of the approach is that it is capable of efficiently creating complex product geome... Read More about Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?.

3D Printing of Biocompatible Supramolecular Polymers and their Composites (2016)
Journal Article
Hart, L. R., Li, S., Sturgess, C., Wildman, R. D., Jones, J. R., & Hayes, W. (in press). 3D Printing of Biocompatible Supramolecular Polymers and their Composites. ACS Applied Materials and Interfaces, 8(5), https://doi.org/10.1021/acsami.5b10471

A series of polymers capable of self-assembling into infinite networks via supramolecular interactions have been designed, synthesized, and characterized for use in 3D printing applications. The biocompatible polymers and their composites with silica... Read More about 3D Printing of Biocompatible Supramolecular Polymers and their Composites.

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents (2016)
Journal Article
Gunasekera, D. H., Kuek, S., Hasanaj, D., He, Y., Tuck, C., Croft, A. K., & Wildman, R. D. (2016). Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents. Faraday Discussions, 190, 509-523. https://doi.org/10.1039/C5FD00219B

1-Ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) and 1-butyl-3-methylimidazolium acetate ([C4C1Im][OAc]) have been used as solvents for the dissolution and ink-jet printing of cellulose from 1.0 to 4.8 wt%, mixed with the co-solvents 1-butanol and... Read More about Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents.

Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography (2016)
Journal Article
Maskery, I., Aboulkhair, N., Corfield, M., Tuck, C., Clare, A., Leach, R. K., …Hague, R. J. (2016). Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography. Materials Characterization, 111, https://doi.org/10.1016/j.matchar.2015.12.001

We used X-ray computed tomography (CT), microscopy and hardness measurements to study Al–Si10–Mg produced by selective laser melting (SLM). Specimens were subject to a series of heat treatments including annealing and precipitation hardening. The spe... Read More about Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography.

An inverse method for determining the spatially resolved properties of viscoelastic–viscoplastic three-dimensional printed materials (2015)
Journal Article
Chen, X., Ashcroft, I., Wildman, R. D., & Tuck, C. (2015). An inverse method for determining the spatially resolved properties of viscoelastic–viscoplastic three-dimensional printed materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471(2183), Article 20150477. https://doi.org/10.1098/rspa.2015.0477

A method using experimental nanoindentation and inverse finite-element analysis (FEA) has been developed that enables the spatial variation of material constitutive properties to be accurately determined. The method was used to measure property varia... Read More about An inverse method for determining the spatially resolved properties of viscoelastic–viscoplastic three-dimensional printed materials.

Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes (2015)
Journal Article
Panesar, A., Brackett, D., Ashcroft, I., Wildman, R. D., & Hague, R. J. (2015). Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes. Journal of Mechanical Design, 137(11), Article 111414. https://doi.org/10.1115/1.4030996

© 2015 by ASME. A framework for the design of additively manufactured (AM) multimaterial parts with embedded functional systems is presented (e.g., structure with electronic/electrical components and associated conductive paths). Two of the key stran... Read More about Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes.

Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size (2015)
Journal Article
Maskery, I., Aremu, A., Simonelli, M., Tuck, C., Wildman, R., Ashcroft, I., & Hague, R. (2015). Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size. Experimental Mechanics, 55(7), 1261-1272. https://doi.org/10.1007/s11340-015-0021-5

Significant weight savings in parts can be made through the use of additive manufacture (AM), a process which enables the construction of more complex geometries, such as functionally graded lattices, than can be achieved conventionally. The existing... Read More about Mechanical Properties of Ti-6Al-4V Selectively Laser Melted Parts with Body-Centred-Cubic Lattices of Varying cell size.

A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V (2015)
Journal Article
Hague, R., Tuck, C., Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., …Hague, R. J. (2015). A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V. Metallurgical and Materials Transactions A, 46(9), 3842-3851. https://doi.org/10.1007/s11661-015-2882-8

The creation of an object by selective laser melting (SLM) occurs by melting contiguous areas of a powder bed according to a corresponding digital model. It is therefore clear that the success of this metal Additive Manufacturing (AM) technology reli... Read More about A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V.

Evolutionary topology optimization using the extended finite element method and isolines (2013)
Journal Article
Abdi, M., Wildman, R., & Ashcroft, I. (2014). Evolutionary topology optimization using the extended finite element method and isolines. Engineering Optimization, 46(5), 628-647. https://doi.org/10.1080/0305215X.2013.791815

This study presents a new algorithm for structural topological optimization of two-dimensional continuum structures by combining the extended finite element method (X-FEM) with an evolutionary optimization algorithm. Taking advantage of an isoline de... Read More about Evolutionary topology optimization using the extended finite element method and isolines.

The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper)
Presentation / Conference Contribution
Bongs, K., Boyer, V., Cruise, M., Freise, A., Holynski, M., Hughes, J., Kaushik, A., Lien, Y.-H., Niggebaum, A., Perea-Ortiz, M., Petrov, P., Plant, S., Singh, Y., Stabrawa, A., Paul, D., Sorel, M., Cumming, D., Marsh, J., Bowtell, R. W., Bason, M., …John, P. (2016, April). The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper). Presented at SPIE Photonics Europe, 2016, Brussels, Belgium

The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices,... Read More about The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper).

Reactive prodrug strategy for addictive manufactured controlled release devices
Presentation / Conference Contribution
Di, M., Cuzzucoli Crucitti, V., Krumins, E., Lion, A., Wildman, R., Taresco, V., & He, Y. (2024, August). Reactive prodrug strategy for addictive manufactured controlled release devices. Paper presented at International Conference on Computational & Experimental Engineering and Sciences 2024, Singapore