Skip to main content

Research Repository

Advanced Search

All Outputs (95)

Mathematical approach to the validation of field surface texture parameter software (2020)
Journal Article
Todhunter, L., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2020). Mathematical approach to the validation of field surface texture parameter software. Surface Topography: Metrology and Properties, 8(1), Article 015010. https://doi.org/10.1088/2051-672x/ab7367

A new method for performance validation of surface texture parameter calculation software is introduced, focussing on field surface texture parameters. Surface height functions are defined mathematically, either using Fourier series or polynomials, a... Read More about Mathematical approach to the validation of field surface texture parameter software.

Polymer powder bed fusion surface texture measurement (2020)
Journal Article
de Pastre, M.-A., Thompson, A., Quinsat, Y., Albajez, J. A., Senin, N., & Leach, R. K. (2020). Polymer powder bed fusion surface texture measurement. Measurement Science and Technology, 31(5), Article 055002. https://doi.org/10.1088/1361-6501/ab63b1

Polymer laser powder bed fusion (LPBF) surfaces can be challenging to measure. These surfaces comprise complex features including undercuts, deep recesses, step-like transitions, a large range of measurement scales and unfavourable optically material... Read More about Polymer powder bed fusion surface texture measurement.

Performance Verification of a Flexible Vibration Monitoring System (2020)
Journal Article
Bointon, P., Todhunter, L., Clare, A., & Leach, R. (2020). Performance Verification of a Flexible Vibration Monitoring System. Machines, 8(1), 3. https://doi.org/10.3390/machines8010003

The performance of measurement or manufacturing systems in high-precision applications is dependent upon the dynamics of the system, as vibration can be a significant contributor to the measurement uncertainty and process variability. Technologies ma... Read More about Performance Verification of a Flexible Vibration Monitoring System.

Review of defects in lattice structures manufactured by powder bed fusion (2019)
Journal Article
Echeta, I., Dutton, B., Feng, X., Leach, R., & Piano, S. (2020). Review of defects in lattice structures manufactured by powder bed fusion. International Journal of Advanced Manufacturing Technology, 106(5-6), 2649–2668. https://doi.org/10.1007/s00170-019-04753-4

Additively manufactured lattice structures are popular due to their desirable properties, such as high specific stiffness and high surface area, and are being explored for several applications including aerospace components, heat exchangers and biome... Read More about Review of defects in lattice structures manufactured by powder bed fusion.

Uncertainty model for a traceable stereo-photogrammetry system (2019)
Journal Article
Sims-Waterhouse, D., Isa, M., Piano, S., & Leach, R. (2020). Uncertainty model for a traceable stereo-photogrammetry system. Precision Engineering, 63, 1-9. https://doi.org/10.1016/j.precisioneng.2019.12.008

Through the computational modelling and experimental verification of a stereo-photogrammetry system, the expanded uncertainty on form measurement was estimated and was found to be , and for a 95% confidence interval (coverage factors of = 3.2, 2.0... Read More about Uncertainty model for a traceable stereo-photogrammetry system.

Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach (2019)
Journal Article
Santos, V. M. R., Thompson, A., Sims-Waterhouse, D., Maskery, I., Woolliams, P., & Leach, R. (2020). Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach. Additive Manufacturing, 32, Article 100964. https://doi.org/10.1016/j.addma.2019.100964

We present the design and characterisation of a high-speed sintering additive manufacturing benchmarking artefact following a design-for-metrology approach. In an important improvement over conventional approaches, the specifications and operating pr... Read More about Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach.

Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts (2019)
Presentation / Conference Contribution
Leach, R. K., Shaheen, A., Piano, S., Sims-Waterhouse, D., & Bointon, P. (2019). Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts.

Digital fringe projection is a non-contact method that is widely used for the dimensional characterisation of complex manufactured parts. However, single camera-projector fringe projection systems struggle to acquire the full three-dimensional point... Read More about Automated characterisation of multi-view fringe projection system for three- dimensional measurement of additively manufactured parts.

Assessment of surface topography modifications through feature-based registration of areal topography data (2019)
Journal Article
Moretti, M., Gambucci, G., Leach, R., & Senin, N. (2019). Assessment of surface topography modifications through feature-based registration of areal topography data. Surface Topography: Metrology and Properties, 7(2), Article 025003. https://doi.org/10.1088/2051-672X/ab152a

Surface topography modifications due to wear or other factors are usually investigated by visual and microscopic inspection, and – when quantitative assessment is required – through the computation of surface texture parameters. However, the current... Read More about Assessment of surface topography modifications through feature-based registration of areal topography data.

Mathematical approach to the validation of functional surface texture parameter software (2019)
Journal Article
Todhunter, L., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2019). Mathematical approach to the validation of functional surface texture parameter software. Surface Topography: Metrology and Properties, 7(1), Article 015020. https://doi.org/10.1088/2051-672X/ab07ca

A new method for performance validation of surface texture parameter calculation software is introduced, focussing on functional surface texture parameters. Material ratio curves are defined algebraically and used to calculate functional surface text... Read More about Mathematical approach to the validation of functional surface texture parameter software.

Development of mathematical reference standards for the validation of surface texture parameter calculation software (2018)
Presentation / Conference Contribution
Todhunter, L., Leach, R., Lawes, S., Blateyron, F., & Harris, P. (2018). Development of mathematical reference standards for the validation of surface texture parameter calculation software. In n/a

A framework for the validation of surface texture parameter calculation software is proposed. The framework utilises mathematically defined surfaces and mathematically calculated surface texture parameter values to produce a reference against which t... Read More about Development of mathematical reference standards for the validation of surface texture parameter calculation software.

An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts (2018)
Journal Article
Townsend, A., Racasan, R., Leach, R., Senin, N., Thompson, A., Ramsey, A., …Blunt, L. (2018). An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts. Additive Manufacturing, 23, 422-432. https://doi.org/10.1016/j.addma.2018.08.013

This paper presents the results of the CT-STARR (CT-Surface Texture for Additive Round Robin) Stage 1 interlaboratory comparison. The study compared the results obtained for the extraction of areal surface texture data per ISO 25178-2 from five X-ray... Read More about An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts.

Benchmarking of an additive manufacturing process (2018)
Presentation / Conference Contribution
Rivas Santos, V., Maskery, I., Sims-Waterhouse, D., Thompson, A., Leach, R., Ellis, A., & Woolliams, P. (2018). Benchmarking of an additive manufacturing process.

Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener (2018)
Journal Article
Ampatzidis, T., Leach, R. K., Tuck, C., & Chronopoulos, D. (2018). Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener. Composites Part B: Engineering, 153, https://doi.org/10.1016/j.compositesb.2018.07.012

In this work, the banded behaviour of composite one-dimensional structures with an additive manufactured stiffener is examined. A finite element method is used to calculate the stiffness, mass and damping matrices, and periodic structure theory is us... Read More about Band gap behavior of optimal one-dimensional composite structures with an additive manufactured stiffener.