All Outputs (15)

Life Characterization of PEEK and Nanofilled Enamel Insulated Wires Under Thermal Ageing (2024)
Journal Article
Khowja, M. R., Vakil, G., Ahmad, S. S., Ramanathan, R., Gerada, C., & Benarous, M. (2024). Life Characterization of PEEK and Nanofilled Enamel Insulated Wires Under Thermal Ageing. IEEE Access, 12, 39470- 39483. https://doi.org/10.1109/access.2024.3374637

This paper characterizes and develops life models for two different wire insulating materials: Poly-ether-ketone (PEEK) and nanofilled enamel (Allotherm wire). The article focuses on predicting the lifespan of PEEK and Allotherm wire insulating mater... Read More about Life Characterization of PEEK and Nanofilled Enamel Insulated Wires Under Thermal Ageing.

Comparative Analysis of Synchronous Reluctance Machine against Conventional Induction Machine for Railway Traction (2022)
Presentation / Conference Contribution
Tom, L., Khowja, M. R., Ramanathan, R., Vakil, G., & Gerada, C. (2022). Comparative Analysis of Synchronous Reluctance Machine against Conventional Induction Machine for Railway Traction. In 2022 International Conference on Electrical Machines (ICEM 2022) (69-76). https://doi.org/10.1109/ICEM51905.2022.9910767

Electrification in railway industry offers better performing trains with reduced pollution and maximised capacity. SynREL is gaining more interest as a candidate for traction application in place of IM due to its simple and robust structure. Conseque... Read More about Comparative Analysis of Synchronous Reluctance Machine against Conventional Induction Machine for Railway Traction.

Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark (2022)
Presentation / Conference Contribution
Connor, P. H., Khowja, M., La Rocca, A., La Rocca, S., Zou, T., Vakil, G., …Paciura, K. (2022). Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark. . https://doi.org/10.1109/icem51905.2022.9910649

This paper investigates the potential benefits for the use of synchronous reluctance machines for traction applications. Permanent magnet machines are often used to generate the highest power densities. However, magnet use has drawbacks including tem... Read More about Investigating Synchronous Reluctance Rotor Performance for Traction Applications against a Permanent Magnet Benchmark.

Review on the Traditional and Integrated Passives: State-of-the-Art Design and Technologies (2021)
Journal Article
Khowja, M. R., Abebe, R., Vakil, G., Walker, A., Patel, C., Gerada, C., …Cascella, G. L. (2021). Review on the Traditional and Integrated Passives: State-of-the-Art Design and Technologies. Energies, 15(1), Article 88. https://doi.org/10.3390/en15010088

With the increased necessity of a high power density and efficient system in aerospace and marine industries, integrated motor drives provide an excellent solution in the modern era. Therefore, a close structural and functional integration of passive... Read More about Review on the Traditional and Integrated Passives: State-of-the-Art Design and Technologies.

Integrated motor drive: Mass and volume optimization of the motor with an integrated filter inductor (2021)
Journal Article
Khowja, M. R., Vakil, G., Gerada, C., Patel, C., Odhano, S., & Wheeler, P. (2021). Integrated motor drive: Mass and volume optimization of the motor with an integrated filter inductor. Energies, 14(15), Article 4564. https://doi.org/10.3390/en14154564

The present trend of aerospace industries is being shifted towards a “More Electric Aircraft” system which needs to be high power dense. For this purpose, the integration technologies have gained massive interest, providing the benefits of reduced lo... Read More about Integrated motor drive: Mass and volume optimization of the motor with an integrated filter inductor.

Thermal Lifetime Evaluation of Electrical Machines Using Neural Network (2020)
Presentation / Conference Contribution
Turabee, G., Khowja, M. R., Madonna, V., Giangrande, P., Vakil, G., Gerada, C., & Galea, M. (2020). Thermal Lifetime Evaluation of Electrical Machines Using Neural Network. In 2020 IEEE Transportation Electrification Conference & Expo (ITEC) (1153-1158). https://doi.org/10.1109/ITEC48692.2020.9161662

© 2020 IEEE. This paper proposes a surrogate approach which utilises an supervised neural network to significantly shorten the time required for thermal qualification of electrical machines' insulation. The proposed approach is based on a feedforward... Read More about Thermal Lifetime Evaluation of Electrical Machines Using Neural Network.

A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet (2020)
Presentation / Conference Contribution
Ram Kumar, R. M., Khowja, M. R., Vakil, G., Gerada, D., Gerada, C., Paciura, K., & Fernandes, B. G. (2020). A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet. In 2020 IEEE Transportation Electrification Conference & Expo (ITEC) (340-345). https://doi.org/10.1109/itec48692.2020.9161631

Electric vehicles (EVs) are equipped with interior permanent magnet (IPM) or permanent magnet assisted synchronous reluctance (PM-SynRel) machines because of their superior performance in field weakening region. The effect of saturation is more prono... Read More about A Hybrid Computational Tool to Analyze the Performance of Electric Machines with Reduced Content of Permanent Magnet.

Novel Permanent Magnet Synchronous Motor with Integrated Filter Inductor Using Motor's Inherent Magnetics (2020)
Journal Article
Khowja, M. R., Gerada, C., Vakil, G., Patel, C., Odhano, S. A., Walker, A., & Wheeler, P. (2021). Novel Permanent Magnet Synchronous Motor with Integrated Filter Inductor Using Motor's Inherent Magnetics. IEEE Transactions on Industrial Electronics, 68(7), 5638-5649. https://doi.org/10.1109/tie.2020.3000110

A close functional and structural integration of passive elements is required to improve the power density of motor drives. Such power-dense motor drives are prerequisites in aerospace and automotive applications. This article presents a permanent ma... Read More about Novel Permanent Magnet Synchronous Motor with Integrated Filter Inductor Using Motor's Inherent Magnetics.

The Role of Neural Networks in Predicting the Thermal Life of Electrical Machines (2020)
Journal Article
Turabee, G., Khowja, M. R., Giangrande, P., Madonna, V., Cosma, G., Vakil, G., …Galea, M. (2020). The Role of Neural Networks in Predicting the Thermal Life of Electrical Machines. IEEE Access, 8, 40283-40297. https://doi.org/10.1109/ACCESS.2020.2975985

© 2013 IEEE. For a continuous mode of operation, insulating material in an electrical machine is subject to constant thermal, electrical, mechanical and environmental stresses where thermal stress is a major cause of gradual insulation deterioration,... Read More about The Role of Neural Networks in Predicting the Thermal Life of Electrical Machines.

Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System (2019)
Presentation / Conference Contribution
Khowja, M. R., Vakil, G., Gerada, C., Yang, T., Bozhko, S., & Wheeler, P. (2019). Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1435-1440). https://doi.org/10.1109/IECON.2019.8926961

Mechanically-driven actuators, compressors and pumps are being replaced by the aircraft manufacturers that shift the trend towards 'More Electric Aircraft' and hence reducing the mechanical linkages within the aircraft system. This elevates the depen... Read More about Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System.

Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions (2019)
Presentation / Conference Contribution
Khowja, M. R., Vakil, G., & Gerada, C. (2019). Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (922-927). https://doi.org/10.1109/IECON.2019.8927436

This paper presents an analytical tool to generate torque vs speed characteristics of the surface-mounted permanent magnet machines to minimize the computation time and efforts. The paper also derives an expression of d-axis current in the field weak... Read More about Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Quadri, S. Q., Wheeler, P., & Patel, C. (2018). Design of an Integrated Inductor for 45kW Aerospace Starter-Generator. In 2018 IEEE Transportation and Electrification Conference and Expo (ITEC) (570-575). https://doi.org/10.1109/ITEC.2018.8450246

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Design optimization of integrated rotor-less inductors for high-speed AC drive applications (2017)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Patel, C., & Wheeler, P. (in press). Design optimization of integrated rotor-less inductors for high-speed AC drive applications. In 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (69-74)

Discrete sub-system due to passive elements in motor drive require functional and structural integration to make efficient and power dense overall system. Such power dense system is the prerequisite in aerospace and marine applications. This paper pr... Read More about Design optimization of integrated rotor-less inductors for high-speed AC drive applications.

Novel integrative options for passive filter inductor in high speed AC drives (2016)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Wheeler, P., & Patel, C. (2016). Novel integrative options for passive filter inductor in high speed AC drives. In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. https://doi.org/10.1109/IECON.2016.7793661

This paper presents novel integration options for passive inductor which include: motor-shaped rotational and motor-shaped rotor-less inductor for high speed motor drive system. The novel options have been designed and their performance is compared w... Read More about Novel integrative options for passive filter inductor in high speed AC drives.

Integrated output filter inductor for permanent magnet motor drives
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Wheeler, P., & Patel, C. (in press). Integrated output filter inductor for permanent magnet motor drives.

This paper presents a novel approach to integrate the output filter inductor in permanent magnet synchronous motor (PMSM) drive system. The integrated output filter inductor is based on utilizing the motor magnetics as a filter inductance instead of... Read More about Integrated output filter inductor for permanent magnet motor drives.