Skip to main content

Research Repository

Advanced Search

An investigation on using pre-treated tyre rubber as a replacement of synthetic polymers for bitumen modification

Subhy, Ayad; Lo Presti, Davide; Airey, Gordon

Authors

Ayad Subhy ayad.subhy@nottingham.ac.uk

Davide Lo Presti

GORDON AIREY GORDON.AIREY@NOTTINGHAM.AC.UK
Professor of Pavement Engineering Materials



Abstract

Rubberized bitumen obtained through a swelling process, has widely proven to be a successful technology for asphalt pavement applications and a solution to reduce the dismantling of tyre rubber on landfills. However, this technology presents two main operative issues which needs the adoption of costly special equipment. Firstly, significant high value of High Temperature Viscosity (HTV) which imposes mixing and compaction difficulties and leads to increased energy consumption and emissions. Furthermore, during the hot storage period, phase separation between rubber particles and the base bitumen could occur. Developing Recycled Tyre Rubber Modified Bitumen (RTR-MBs) with improved storage stability and reduced values of HTV could allow using this technology in standard asphalt plants, resulting in an environmental-friendly and cost-effective option of standard Polymer Modified Bitumen (PMBs). In this study, two different pre-treated and one straight ambient recycled rubbers were used to produce RTR-MBs. The first RTR was pre-treated by special oil and Warm Mix Additives (WMA) and the second was partly devulcanised. Also, two base binders were selected with large differences in mechanical properties in order to identify the effect of base binder. The high temperature viscosity was successfully reduced by using pre-treated RTR. The use of RTR together with Fischer–Tropsch wax (Sasobit®) in bitumen technology offered superior high in-service temperature properties and reduced value of HTV, and thus can be preferred option over styrene–butadiene–styrene (SBS) modification.

Journal Article Type Article
Journal Road Materials and Pavement Design
Print ISSN 1468-0629
Electronic ISSN 1468-0629
Publisher Taylor & Francis Open
Peer Reviewed Peer Reviewed
Volume 16
APA6 Citation Subhy, A., Lo Presti, D., & Airey, G. (in press). An investigation on using pre-treated tyre rubber as a replacement of synthetic polymers for bitumen modification. Road Materials and Pavement Design, 16, https://doi.org/10.1080/14680629.2015.1030826
DOI https://doi.org/10.1080/14680629.2015.1030826
Keywords recycled tyre rubber, de-vulcanised rubber, FT-wax, rutting resistance, rheological properties, high-temperature viscosity, modified bitumen
Publisher URL http://dx.doi.org/10.1080/14680629.2015.1030826
Copyright Statement Copyright information regarding this work can be found at the following address: http://eprints.nottingh.../end_user_agreement.pdf
Additional Information This is an Accepted Manuscript of an article published by Taylor & Francis in Road Materials and Pavement Design on 16 April 2015, available online: http://www.tandfonline....0/14680629.2015.1030826

Files

An investigation on using pre-treated tyre rubber.pdf (1.2 Mb)
PDF

Copyright Statement
Copyright information regarding this work can be found at the following address: http://eprints.nottingham.ac.uk/end_user_agreement.pdf



You might also like



Downloadable Citations

;