Kinetic analysis of solid fuel combustion in chemical looping for clean energy conversion

Güleç, Fatih

Abstract

Chemical looping combustion (CLC) offers an advanced, eco-friendly method for converting solid fuels into energy with inherent CO2 capture, presenting a cost-efficient solution. The kinetics of solid fuel CLC, crucial for reactor design, are not well-understood, limiting its application and optimisation. Conducting a comprehensive kinetic analysis of solid fuel CLC is crucial, as it examines the combustion of both volatiles and fixed carbon, thereby addressing existing knowledge gaps and advancing clean conversion of solid fuels. In this study, a comprehensive kinetic analysis method for the first time has been applied to investigate the kinetics of CLC of low-volatile semi-anthracite coal with CuO at temperatures of 700–950 °C under varied oxygen excess ratios (0.5, 1.0, and 2.0). The results show that the combustion of coal in CLC can be divided into three distinct stages. The combustion of coal with CuO initiates with the combustion of volatiles interacting with solid CuO at 450–580 °C, where the combustion efficiency varies between 3–6 wt%. This is followed by a complex simultaneous mechanism involving gas-phase volatiles and solid-phase CuO, as well as gas-phase oxygen and solid-phase fixed carbon under non-isothermal conditions. The combustion efficiency is ranged 19–71 wt% at the temperature ranges from 580 °C to the isothermal temperatures of 750–950 °C. The activation energy for the combustion of volatiles was determined as Ea = 119 kJ/mol, whereas the initial combustion of fixed carbon in the non-isothermal stage ranged between Ea = 39–53 kJ/mol. The rate of combustion is initially limited by the oxygen diffusion rate from CuO, but with additional oxygen carriers and increased temperature, the reaction becomes constrained by first-order kinetics. Upon reaching the isothermal stage, the final combustion phase between fixed carbon and gas phase oxygen occurs, and the combustion efficiency increases to 77–96 wt% at 750–950 °C. The activation energy for fixed carbon combustion under the isotherm stage was approximately Ea = 234 kJ/mol, with a reaction rate constant (k0) of 7.84 × 109 min−1. This pioneering study not only clarifies the multi-stage kinetics of solid fuel CLC, bridging significant gaps in current knowledge but also sets the foundation for the enhanced design and efficiency of CLC systems for cleaner energy production.

Citation

Güleç, F. (2024). Kinetic analysis of solid fuel combustion in chemical looping for clean energy conversion. Fuel, 378, Article 132911. https://doi.org/10.1016/j.fuel.2024.132911

• Journal Article Type: Article
• Acceptance Date: Jul 24, 2024
• Online Publication Date: Sep 26, 2024
• Publication Date: Dec 15, 2024
• Deposit Date: Aug 28, 2024
• Publicly Available Date: Sep 2, 2024
• Journal: Fuel
• Print ISSN: 0016-2361
• Electronic ISSN: 1873-7153
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 378
• Article Number: 132911
• DOI: https://doi.org/10.1016/j.fuel.2024.132911
• Public URL: https://nottingham-repository.worktribe.com/output/38906215
• Publisher URL: https://www.sciencedirect.com/science/article/pii/S001623612402060X?via%3Dihub
• Additional Information: This article is maintained by: Elsevier; Article Title: Kinetic analysis of solid fuel combustion in chemical looping for clean energy conversion; Journal Title: Fuel; CrossRef DOI link to publisher maintained version: https://doi.org/10.1016/j.fuel.2024.132911; Content Type: article; Copyright: © 2024 The Author. Published by Elsevier Ltd.