Anisotropic Icephobic Mechanisms of Textured Surface: Barrier or Accelerator?

Yang, Deyu; Zheng, Yanchang; Li, Jingtong; Clare, Adam T.; Choi, Kwing-So; Hou, Xianghui

Abstract

Icing has been seen as an economic and safety hazard due to its threats to aviation, power generation, offshore platforms, etc., where passive icephobic surfaces with a surface texturing design have the potential to address this problem. However, the intrinsic icephobic principles associated with the surface textures, energy, elasticity, and hybrid effects are still unclear. To explore the anisotropic wettability, ice nucleation, and ice detaching behaviors, a series of textured poly(dimethylsiloxane) (PDMS)-based coatings with various texture orientations were proposed through a simple stamping method with surface functionalization. The anisotropic hydrophobic/icephobic phenomena and mechanisms were discovered from wettability evaluation, experimentally studied by icing/deicing experiments, and finally verified by microscopic numerical simulations. One-way analysis of variance (one-way ANOVA analysis) was used to analyze the effect of surface textures on hydrophobic/icephobic properties, which assisted in understanding anisotropic phenomena. Typical anisotropic ice nucleation and growth on the textured coatings were clarified using in situ environmental scanning electron microscope (ESEM) characterization. The ice/coating interfacial stress responses were studied by numerical stimulation at the microscopic level, further verifying the localized, amplified, and propagated stress at the ice/coating interface. The theoretical anisotropic responses, barrier effect, and accelerating effect were verified to interpret the anisotropic wettability and icephobicity, depending on the specific surface conditions. This study revealed the basics of the anisotropic icephobic mechanisms of textured icephobic surfaces, further facilitating the R&D of passive icephobic surfaces.

Citation

Yang, D., Zheng, Y., Li, J., Clare, A. T., Choi, K.-S., & Hou, X. (2024). Anisotropic Icephobic Mechanisms of Textured Surface: Barrier or Accelerator?. ACS Applied Materials and Interfaces, https://doi.org/10.1021/acsami.4c08004

• Journal Article Type: Article
• Acceptance Date: Jun 17, 2024
• Online Publication Date: Jun 27, 2024
• Publication Date: Jun 27, 2024
• Deposit Date: Jul 2, 2024
• Publicly Available Date: Jun 28, 2025
• Journal: ACS Applied Materials & Interfaces
• Print ISSN: 1944-8244
• Electronic ISSN: 1944-8252
• Publisher: American Chemical Society
• Peer Reviewed: Peer Reviewed
• DOI: https://doi.org/10.1021/acsami.4c08004
• Keywords: Coating materials, Liquids, Nucleation, Stress, Surface interactions
• Public URL: https://nottingham-repository.worktribe.com/output/36579783
• Publisher URL: https://pubs.acs.org/doi/10.1021/acsami.4c08004