Skip to main content

Research Repository

Advanced Search

The Effect of Spread Spectrum Modulation for a Buck Converter Coupled with a Single Wired Communication Link

Pena-Quintal, A.; Niewiadomski, Karol; Muneeswaran, V.; Greedy, S.; Sumner, M.; Thomas, D.W.P.

Authors

A. Pena-Quintal

Karol Niewiadomski

V. Muneeswaran

D.W.P. Thomas



Abstract

This paper explores the effect of using a Spread Spectrum modulation technique with a Buck Converter on a communication cable coupled at the input voltage. The EMI created by the switching of the power converter generates damped oscillations on the data cable that can have great impact on the quality of the communication channel. Frequency domain analysis shows lower EMI levels in the power cable when compared to the standard deterministic modulation. However, there is no real improvement to the actual communications as there in an increase in the measured Bit Error Rate when evaluated experimentally.

Citation

Pena-Quintal, A., Niewiadomski, K., Muneeswaran, V., Greedy, S., Sumner, M., & Thomas, D. (2021, July). The Effect of Spread Spectrum Modulation for a Buck Converter Coupled with a Single Wired Communication Link. Presented at 2021 IEEE International Joint EMC/SI/PI and EMC Europe Symposium, Virtual

Presentation Conference Type Edited Proceedings
Conference Name 2021 IEEE International Joint EMC/SI/PI and EMC Europe Symposium
Start Date Jul 26, 2021
End Date Aug 13, 2021
Acceptance Date May 27, 2021
Online Publication Date Oct 19, 2021
Publication Date Oct 19, 2021
Deposit Date Oct 6, 2023
Publisher Institute of Electrical and Electronics Engineers
Peer Reviewed Peer Reviewed
Pages 445-450
Book Title 2021 IEEE International Joint EMC/SI/PI and EMC Europe Symposium
ISBN 978-1-6654-4889-5
DOI https://doi.org/10.1109/EMC/SI/PI/EMCEurope52599.2021.9559276
Public URL https://nottingham-repository.worktribe.com/output/23541113
Publisher URL https://ieeexplore.ieee.org/document/9559276