Skip to main content

Research Repository

Advanced Search

Development of Composite Microencapsulated Phase Change Materials for Multi-Temperature Thermal Energy Storage

Su, Weiguang; Darkwa, Jo; Zhou, Tongyu; Du, Dengfeng; Kokogiannakis, Georgios; Li, Yilin; Wang, Li; Gao, Liying

Development of Composite Microencapsulated Phase Change Materials for Multi-Temperature Thermal Energy Storage Thumbnail


Authors

Weiguang Su

JO DARKWA Jo.Darkwa@nottingham.ac.uk
Professor of Energy Storage Technologies

Tongyu Zhou

Dengfeng Du

Georgios Kokogiannakis

Yilin Li

Li Wang

Liying Gao



Contributors

S. Afflerbach
Editor

Reinhard Trettin
Editor

Abstract

Phase change energy storage materials have been recognized as potential energy-saving materials for balancing cooling and heating demands in buildings. However, individual phase change materials (PCM) with single phase change temperature cannot be adapted to different temperature requirements. To this end, the concept of fabricating different kinds of microencapsulated PCM (MEPCM) and combing them to form a multiphase change material (MPCM) for multi-seasonal applications in buildings has been proposed. To prove the feasibility of this idea, three kinds of MEPCMs were fabricated and used for the development of three different composite MPCMs, classified as MPCM-1, MPCM-2, and MPCM-3. Analysis of the results shows that each MPCM sample was able to release latent heat at two different temperatures thus making them suitable for multi-temperature thermal energy storage applications. The phase change temperatures of the MPCMs were however found to be slightly reduced by 0.09–0.31 °C as compared with the MEPCMs samples. The measured energy storage capacities for the MPCMs were also reduced in the range of 6.3–11.4% as compared with the theoretical values but they displayed relatively good thermal stability behaviour of up to 197.8–218.8 °C. It was further identified that the phase change temperatures and latent heat of the MPCM was attributed to the weight percentages of individual components, as the theoretical values for the three MPCM samples were all in good accordance with the measured values. Therefore, optimizing the weight ratios of the MEPCM in MPCM samples and their corresponding thermophysical properties based on specific climatic conditions would be a necessary step to take in future investigations. Thermal performance enhancement of the MPCM is also being recommended as an essential part of further research.

Citation

Su, W., Darkwa, J., Zhou, T., Du, D., Kokogiannakis, G., Li, Y., …Gao, L. (2023). Development of Composite Microencapsulated Phase Change Materials for Multi-Temperature Thermal Energy Storage. Crystals, 13(8), Article 1167. https://doi.org/10.3390/cryst13081167

Journal Article Type Article
Acceptance Date Jul 25, 2023
Online Publication Date Jul 27, 2023
Publication Date 2023-08
Deposit Date Jul 28, 2023
Publicly Available Date Jul 28, 2023
Journal Crystals
Electronic ISSN 2073-4352
Publisher MDPI
Peer Reviewed Peer Reviewed
Volume 13
Issue 8
Article Number 1167
DOI https://doi.org/10.3390/cryst13081167
Keywords Microencapsulated phase change material; thermal energy storage; energy-saving; buildings
Public URL https://nottingham-repository.worktribe.com/output/23485658
Additional Information Academic Editors: S. Afflerbach and Reinhard Trettin Received: 27 June 2023 Revised: 25 July 2023 Accepted: 25 July 2023; Du, D.; Kokogiannakis, G.; Li, Y.; Wang, L.; Gao, L. Development of Composite Microencapsulated Phase Change Materials for Multi-Temperature Thermal Energy Storage. Crystals 2023, 13, 1167. Copyright: This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/). crystals Article

Files




You might also like



Downloadable Citations