Skip to main content

Research Repository

Advanced Search

Improving thermal performance of a ventilated tiled roof by using phase change materials

Baccega, Eleonora; Bottarelli, Michele; Gallero, Francisco Javier González; Maestre, Ismael Rodríguez; Pei, Gang; Su, Yuehong

Improving thermal performance of a ventilated tiled roof by using phase change materials Thumbnail


Authors

Eleonora Baccega

Michele Bottarelli

Francisco Javier González Gallero

Ismael Rodríguez Maestre

Gang Pei

YUEHONG SU YUEHONG.SU@NOTTINGHAM.AC.UK
Professor of Thermal Science and Building Technology



Abstract

The adoption of ventilated roofs and facades, as well as the integration of phase change materials (PCMs) in the building envelope, have proved to be effective as passive cooling techniques in reducing the solar heat gain through the building envelope during the summer period and, therefore, reduce the energy requirement for cooling. Even though much research focused on each of these strategies individually, their combination has not been deeply studied yet. Preliminary numerical studies were carried out on the application of PCMs on a pitched ventilated tiled roof and the most effective position turned out to be suspended in the middle of the above sheathing ventilation (ASV) channel. Based on this conclusion and exploiting an existing mock-up facility, two equivalent pitched ventilated roofs with an air gap of 4 cm were built as coverage of two identical rooms, each one equipped with a fan coil, one with a 0.007 m PCM layer suspended in the middle of the ASV and the other one without. They were then tested under real conditions at the TekneHub Laboratory at the University of Ferrara. The behaviour of the two configurations were compared in terms of temperature, velocity of the air in the ASV, heat flux, and energy requirement for cooling, which were monitored through T-type thermocouples, heat flow meter, anemometers and energy meters, respectively. The aim of the research was to validate the numerical results and confirm that the combination of the two strategies allows further improvement of roof performance.

Citation

Baccega, E., Bottarelli, M., Gallero, F. J. G., Maestre, I. R., Pei, G., & Su, Y. (2024). Improving thermal performance of a ventilated tiled roof by using phase change materials. International Journal of Low-Carbon Technologies, 19, 54-62. https://doi.org/10.1093/ijlct/ctad047

Journal Article Type Article
Acceptance Date Apr 24, 2023
Online Publication Date May 10, 2023
Publication Date 2024
Deposit Date Jun 30, 2023
Publicly Available Date Oct 24, 2023
Journal International Journal of Low-Carbon Technologies
Print ISSN 1748-1317
Electronic ISSN 1748-1325
Publisher Oxford University Press
Peer Reviewed Peer Reviewed
Volume 19
Pages 54-62
DOI https://doi.org/10.1093/ijlct/ctad047
Keywords Passive cooling, Phase change materials, Ventilated roof, Energy efficiency of buildings
Public URL https://nottingham-repository.worktribe.com/output/21098230
Publisher URL https://academic.oup.com/ijlct/advance-article/doi/10.1093/ijlct/ctad047/7158709

Files





You might also like



Downloadable Citations