Skip to main content

Research Repository

Advanced Search

Outputs (472)

Novel GaN-HEMT modelling method based on S-parameters characterisation and its implementation in Virtual Prototyping software (2018)
Presentation / Conference Contribution
Li, K., Pace, L., Videt, A., IDIR, N., Evans, P., Johnson, M., Defrance, N., & Dejaeger, J.-C. (2018, July). Novel GaN-HEMT modelling method based on S-parameters characterisation and its implementation in Virtual Prototyping software. Poster presented at EPSRC Centre for Power Electronics (CPE) Annual Conference, Loughborough, UK

SiC-based Triple Active Bridge Converter for Shipboard Micro-grid Applications with Efficient Energy Storage (2018)
Presentation / Conference Contribution
Wang, Z., & Castellazzi, A. (2018, December). SiC-based Triple Active Bridge Converter for Shipboard Micro-grid Applications with Efficient Energy Storage. Presented at International Conference on Smart Grid (icSmartGrid 2018), Nagasaki, Japan

Silicon Carbide (SiC) MOSFET power module has became commercially available in the past few years, and it is attractive in dual/triple active bridge converters to replace conventional Si-IGBTs. The capability to connect with the energy storage system... Read More about SiC-based Triple Active Bridge Converter for Shipboard Micro-grid Applications with Efficient Energy Storage.

Towards a cloud-based analytics framework for assembly systems (2018)
Book Chapter
Terrazas, G., de Silva, L., & Ratchev, S. (2018). Towards a cloud-based analytics framework for assembly systems. In S. Ratchev (Ed.), Precision assembly in the digital age: 8th IFIP WG5.5 International Precision Assembly Seminar, IPAS 2108, Chamonix, France, January 14-16, 2018: revised selected papers (134-141). Springer. https://doi.org/10.1007/978-3-030-05931-6_13

Advanced digitalization together with the rise of cloud technologies is a key enabler for a fundamental paradigm shift known as Industry 4.0 which pro-poses the integration of the new generation of ICT solutions for the monitoring, adaptation, simula... Read More about Towards a cloud-based analytics framework for assembly systems.

Sensorless Control of a Fault-tolerant Multi-level PMSM Drive (2018)
Journal Article
Saleh, K., & Sumner, M. (2018). Sensorless Control of a Fault-tolerant Multi-level PMSM Drive. TELKOMNIKA (Telecommunication, Computing, Electronics and Control), 16(6), 2930-2942

This paper presents a new technique to track the saliency position in a permanent magnet synchronous motor (PMSM) post a single phase open-circuit fault. The PMSM is driven by a fault-tolerant multi-level inverter that is utilized to implement a faul... Read More about Sensorless Control of a Fault-tolerant Multi-level PMSM Drive.

Bond behavior degradation between FRP and masonry under aggressive environmental conditions (2018)
Journal Article
Ramirez, R., Maljaee, H., Ghiassi, B., Lourenço, P. B., & Oliveira, D. V. (2019). Bond behavior degradation between FRP and masonry under aggressive environmental conditions. Mechanics of Advanced Materials and Structures, 26(1), 6-14. https://doi.org/10.1080/15376494.2018.1534164

Application of Fibre Reinforced Polymers (FRPs) as external reinforcement for masonry structures has been found to be a promising technique, but the long-term behavior of such systems still needs attention. This study presents an overview of the expe... Read More about Bond behavior degradation between FRP and masonry under aggressive environmental conditions.

Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing (2018)
Presentation / Conference Contribution
Milesh Pieris, D., Patel, R., Dryburgh, P., Hirsch, M., Li, W., Sharples, S. D., Smith, R. J., Clare, A. T., & Clark, M. (2018, September). Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing. Presented at NDT 2018 - 57th Annual Conference of the British Institute of Non-Destructive Testing, Nottingham, UK

High-integrity engineering applications such as aerospace will not permit the incorporation of components containing any structural defects. The current generation of additive manufacturing platforms yield components with relatively high levels of... Read More about Spatially Resolved Acoustic Spectroscopy Towards Online Inspection of Additive Manufacturing.

Drawing on Architecture: The Object of Lines, 1970–1990 (2018)
Book
Kauffman, J. (2018). Drawing on Architecture: The Object of Lines, 1970–1990. Massachusetts Institute of Technology Press (MIT Press). https://doi.org/10.7551/mitpress/11370.001.0001

How architectural drawings emerged as aesthetic objects, promoted by a network of galleries, collectors, and institutions, and how this changed the understanding of architecture.

Prior to the 1970s, buildings were commonly understood to be the goa... Read More about Drawing on Architecture: The Object of Lines, 1970–1990.

The use of POD filtering to study the transition from 2D to 3D in stratified two- phase flow (2018)
Presentation / Conference Contribution
Hann, D. B., Loizou, K., Vasques, J., Tokarev, M. P., & Cherdantsev, A. V. (2018, July). The use of POD filtering to study the transition from 2D to 3D in stratified two- phase flow. Presented at 19th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, Portugal

The understanding of the velocity profile beneath waves in sheared flow can have implications for the understanding of heat transfer in many applications. In this paper an analysis of the velocity field beneath 2D and 3D waves is performed to underst... Read More about The use of POD filtering to study the transition from 2D to 3D in stratified two- phase flow.

Influence of DGs on the Single-Ended Impedance Based Fault Location Technique (2018)
Presentation / Conference Contribution
Jahanger, H. K., Sumner, M., & Thomas, D. W. P. (2018, November). Influence of DGs on the Single-Ended Impedance Based Fault Location Technique. Presented at 5th International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles (ESARS) and International Transportation Electrification Conference (ITECH), Nottingham, UK

The penetration of Distributed Generation (DG) into electricity distribution systems or the integrated power system such as ship or aircraft power systems present a challenge to fault location techniques. This paper investigates the influence of inve... Read More about Influence of DGs on the Single-Ended Impedance Based Fault Location Technique.