Outputs (10)

On the Microstructural Evolution and Failure Mechanism in Laser Powder Bed Fusioned Ti-6Al-4V during Low Cycle Fatigue at Room and Elevated Temperatures (2022)
Journal Article
Gupta, A., Bennett, C. J., Sun, W., & Neate, N. (2022). On the Microstructural Evolution and Failure Mechanism in Laser Powder Bed Fusioned Ti-6Al-4V during Low Cycle Fatigue at Room and Elevated Temperatures. Journal of Materials Research and Technology, 21, 4299-4319. https://doi.org/10.1016/j.jmrt.2022.10.141

Microstructural features and their evolution during cyclic deformation directly impact the low cycle fatigue (LCF) life of additively manufactured Laser Powder Bed Fusion (LPBF) Ti-6Al-4V. Tensile and strain controlled LCF tests were performed at roo... Read More about On the Microstructural Evolution and Failure Mechanism in Laser Powder Bed Fusioned Ti-6Al-4V during Low Cycle Fatigue at Room and Elevated Temperatures.

Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties (2022)
Journal Article
Hu, C., Zhang, H., Neate, N., Fay, M., Hou, X., Grant, D., & Xu, F. (2022). Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties. Polymers, 14(13), Article 2583. https://doi.org/10.3390/polym14132583

In this study, graphene oxide–carbon nanotubes nanostructures decorated with nickel nanoparticles (NiGNT) were prepared through the molecular-level-mixing method, followed by a reduction process, and then applied as reinforcements to enhance the epox... Read More about Highly Aligned Ni-Decorated GO–CNT Nanostructures in Epoxy with Enhanced Thermal and Electrical Properties.

Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites (2021)
Journal Article
Hu, C., Liu, T., Neate, N., Fay, M., Hou, X., Grant, D., & Xu, F. (2022). Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites. Composites Science and Technology, 218, Article 109201. https://doi.org/10.1016/j.compscitech.2021.109201

A nanostructure of graphene oxide (GO) and carbon nanotubes (CNTs) decorated with silver nanoparticles (AgGNT) has been prepared via a molecular-level-mixing (MLM) method followed by a subsequent freeze-drying and reduction process. The obtained well... Read More about Enhanced thermal and electrical properties by Ag nanoparticles decorated GO-CNT nanostructures in PEEK composites.

Electric Field Induced Biomimetic Transmembrane Electron Transport Using Carbon Nanotube Porins (2021)
Journal Article
Hicks, J. M., Yao, Y.-C., Barber, S., Neate, N., Watts, J. A., Noy, A., & Rawson, F. J. (2021). Electric Field Induced Biomimetic Transmembrane Electron Transport Using Carbon Nanotube Porins. Small, 17(32), Article 2102517. https://doi.org/10.1002/smll.202102517

Cells modulate their homeostasis through the control of redox reactions via transmembrane electron transport systems. These are largely mediated via oxidoreductase enzymes. Their use in biology has been linked to a host of systems including reprogram... Read More about Electric Field Induced Biomimetic Transmembrane Electron Transport Using Carbon Nanotube Porins.

Flame spheroidisation of dense and porous Ca2Fe2O5 microspheres (2020)
Journal Article
Molinar Díaz, J., Samad, S. A., Steer, E., Neate, N., Constantin, H., Islam, M. T., Brown, P. D., & Ahmed, I. (2020). Flame spheroidisation of dense and porous Ca2Fe2O5 microspheres. Materials Advances, 1(9), 3539-3544. https://doi.org/10.1039/d0ma00564a

Compositionally uniform magnetic Ca2Fe2O5 (srebrodolskite) microspheres created via a rapid, single-stage flame spheroidisation (FS) process using magnetite and carbonate based porogen (1:1 Fe3O4:CaCO3) feedstock powders, are described. Two types of... Read More about Flame spheroidisation of dense and porous Ca2Fe2O5 microspheres.

On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature (2019)
Journal Article
Rae, Y., Guo, X., Benaarbia, A., Neate, N., & Sun, W. (2020). On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature. Materials Science and Engineering: A, 773, Article 138864. https://doi.org/10.1016/j.msea.2019.138864

© 2019 Elsevier B.V. In order to better understand the physical process of deformation and cyclic softening a 12% Cr martensitic stainless steel FV566 has been cyclically tested at high temperature in strain control. Increase in temperature was found... Read More about On the microstructural evolution in 12% Cr turbine steel during low cycle fatigue at elevated temperature.

Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting (2019)
Journal Article
Aboulkhair, N. T., Simonelli, M., Salama, E., Rance, G., Neate, N. C., Tuck, C. J., Esawi, A. M., & Hague, R. J. (2019). Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting. Materials Science and Engineering: A, 765, Article 138307. https://doi.org/10.1016/j.msea.2019.138307

Aluminium-based composites reinforced with carbon nanotubes are widely sought for their outstanding metallurgical and structural properties that largely depend on the manufacturing route. In this work, the process-structure-property relationship for... Read More about Evolution of carbon nanotubes and their metallurgical reactions in Al-based composites in response to laser irradiation during selective laser melting.

Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating (2018)
Journal Article
Wang, J., Liu, J., Neate, N. C., Bai, M., Xu, F., Hussain, T., Scotchford, C., & Hou, X. (2018). Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating. Journal of Alloys and Compounds, 765, https://doi.org/10.1016/j.jallcom.2018.06.239

Hydrophobic metallic coatings have attracted increasing interest in the recent years due to their excellent mechanical durability. But the wetting behavior and hydrophobic mechanism of metallic coatings are far from clear. In this work, Ni-Cu-P terna... Read More about Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating.

Toward Mid-Infrared, Subdiffraction, Spectral-Mapping of Human Cells and Tissue: SNIM (Scanning Near-Field Infrared Microscopy) Tip Fabrication (2015)
Journal Article
Neate, N., Fay, M., Parmenter, C., Athanasiou, G. S., Ernst, J., Furniss, D., Benson, T. M., Chauhan, J., Middleton, J., Parmenter, C. D., Fay, M. W., Neate, N. C., Shiryaev, V., Churbanov, M. F., & Seddon, A. B. (2016). Toward Mid-Infrared, Subdiffraction, Spectral-Mapping of Human Cells and Tissue: SNIM (Scanning Near-Field Infrared Microscopy) Tip Fabrication. Journal of Lightwave Technology, 34(4), 1212-1219. https://doi.org/10.1109/JLT.2015.2496786

Scanning near-field infrared microscopy (SNIM) potentially enables subdiffraction, broadband mid-infrared (MIR:3–25-μm wavelength range) spectral-mapping of human cells and tissue for real-time molecular sensing, with prospective use in disease diagn... Read More about Toward Mid-Infrared, Subdiffraction, Spectral-Mapping of Human Cells and Tissue: SNIM (Scanning Near-Field Infrared Microscopy) Tip Fabrication.

Mid-infrared photoluminescence in small-core fiber of praseodymium-ion doped selenide-based chalcogenide glass (2015)
Journal Article
Tang, Z., Furniss, D., Fay, M., Sakr, H., Sójka, L., Neate, N., Weston, N., Sujecki, S., Benson, T. M., & Seddon, A. B. (2015). Mid-infrared photoluminescence in small-core fiber of praseodymium-ion doped selenide-based chalcogenide glass. Optical Materials Express, 5(4), 870-886. https://doi.org/10.1364/OME.5.000870

© 2015 Optical Society of America. Rare earth (RE)-ion doped chalcogenide glasses are attractive for mid-infrared (MIR) fiber lasers for operation >4 μm. Our prior modeling suggests that praseodymium (Pr) is a suitable RE-ion dopant for realizing a s... Read More about Mid-infrared photoluminescence in small-core fiber of praseodymium-ion doped selenide-based chalcogenide glass.