Outputs (5001)

Passive control of temperature distribution in cancerous tissue during photothermal therapy using optical phase change nanomaterials (2020)
Journal Article
Ren, Y., Chen, Q., Li, H., Qi, H., & Yan, Y. (2021). Passive control of temperature distribution in cancerous tissue during photothermal therapy using optical phase change nanomaterials. International Journal of Thermal Sciences, 161, Article 106754. https://doi.org/10.1016/j.ijthermalsci.2020.106754

Thermal therapy is a very promising alternative treatment for benign tumor, in which the temperature control is a key issue to avoid unwanted thermal damage of healthy tissue. However, the active temperature control methods usually require the assist... Read More about Passive control of temperature distribution in cancerous tissue during photothermal therapy using optical phase change nanomaterials.

Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale (2020)
Journal Article
Liu, Q., Liao, Z., & Axinte, D. (2020). Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale. International Journal of Machine Tools and Manufacture, 159(Part B), Article 103620. https://doi.org/10.1016/j.ijmachtools.2020.103620

© 2020 Elsevier Ltd Soft-brittle crystals, e.g. KH2PO4 (KDP), are difficult-to-cut due to their high brittleness which can easily generate crack during the machining process. The conventional method to machine this kind of material is by inducing duc... Read More about Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale.

Informing the Development of a Digital Health Platform Through Universal Points of Care: Qualitative Survey Study (2020)
Journal Article
Craven, M. P., Andrews, J., Lang, A. R., Simblett, S. K., Bruce, S., Thorpe, S., Wykes, T., Morriss, R., Hollis, C., & The RADAR-CNS Consortium. (2020). Informing the Development of a Digital Health Platform Through Universal Points of Care: Qualitative Survey Study. JMIR Formative Research, 4(11), Article e22756. https://doi.org/10.2196/22756

Background: Epilepsy, multiple sclerosis (MS), and depression are chronic conditions where technology holds potential in clinical monitoring and self-management. Over 5 years, the Remote Assessment of Disease and Relapse-Central Nervous System (RADAR... Read More about Informing the Development of a Digital Health Platform Through Universal Points of Care: Qualitative Survey Study.

Entropy and thermal performance analysis of PCM melting and solidification mechanisms in a wavy channel triplex-tube heat exchanger (2020)
Journal Article
Shahsavar, A., Majidzadeh, A. H., Mahani, R. B., & Talebizadehsardari, P. (2021). Entropy and thermal performance analysis of PCM melting and solidification mechanisms in a wavy channel triplex-tube heat exchanger. Renewable Energy, 165(2), 52-72. https://doi.org/10.1016/j.renene.2020.11.074

This paper aims to perform the entropy analysis and thermal performance evaluation of a wavy-channels triplex-tube latent heat storage heat exchanger (LHSHE) during melting and solidification mechanisms. The system with different wave amplitudes was... Read More about Entropy and thermal performance analysis of PCM melting and solidification mechanisms in a wavy channel triplex-tube heat exchanger.

Pseudo‐Waveform‐Selective Metasurfaces and their Limited Performance (2020)
Journal Article
Nakasha, T., Phang, S., & Wakatsuchi, H. (2021). Pseudo‐Waveform‐Selective Metasurfaces and their Limited Performance. Advanced Theory and Simulations, 4(1), Article 2000187. https://doi.org/10.1002/adts.202000187

Abstract In recent years, metasurfaces composed of lumped circuit components, including nonlinear Schottky diodes, have been reported to be capable of sensing particular electromagnetic waves even at the same frequency depending on their waveforms, o... Read More about Pseudo‐Waveform‐Selective Metasurfaces and their Limited Performance.

Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design (2020)
Journal Article
Wang, F., Liang, Y., Zhao, O., & Young, B. (2021). Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design. Engineering Structures, 228, Article 111418. https://doi.org/10.1016/j.engstruct.2020.111418

The structural performance and compression resistances of pin-ended press-braked S960 ultra-high strength steel (UHSS) angle section columns have been studied based on experiments and numerical modelling, and are reported in the present paper. An exp... Read More about Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design.

Enhanced Performance of Dual Inverter With a Floating Capacitor for Motor Drive Applications (2020)
Journal Article
Huang, Z., Yang, T., Giangrande, P., Chowdhury, S., Galea, M., & Wheeler, P. (2021). Enhanced Performance of Dual Inverter With a Floating Capacitor for Motor Drive Applications. IEEE Transactions on Power Electronics, 36(6), 6903-6916. https://doi.org/10.1109/tpel.2020.3040029

This article studies a dual inverter supplied by a dc-link and a floating capacitor (FC), emerged as a promising inverter topology for motor drive applications. For this type of inverter, the voltage ratio between the dc-link and the FC can be active... Read More about Enhanced Performance of Dual Inverter With a Floating Capacitor for Motor Drive Applications.

Design of a resonant Luneburg lens for surface acoustic waves (2020)
Journal Article
Fuentes-Domínguez, R., Yao, M., Colombi, A., Dryburgh, P., Pieris, D., Jackson-Crisp, A., Colquitt, D., Clare, A., Smith, R. J., & Clark, M. (2021). Design of a resonant Luneburg lens for surface acoustic waves. Ultrasonics, 111, Article 106306. https://doi.org/10.1016/j.ultras.2020.106306

© 2020 In this work we employ additive manufacturing to print a circular array of micropillars on an aluminium slab turning its top surface into a graded index metasurface for surface acoustic waves (SAW). The graded metasurface reproduces a Luneburg... Read More about Design of a resonant Luneburg lens for surface acoustic waves.

Experimental Statistical Method Predicting AC Losses on Random Windings and PWM Effect Evaluation (2020)
Journal Article
Preci, E., Valente, G., Galassini, A., Yuan, X., Degano, M., Gerada, D., Buticchi, G., & Gerada, C. (2021). Experimental Statistical Method Predicting AC Losses on Random Windings and PWM Effect Evaluation. IEEE Transactions on Energy Conversion, 36(3), 2287-2296. https://doi.org/10.1109/TEC.2020.3040265

Nowadays, one of the challenges in transport electrification is the reduction of the components' size and weight in order to improve the power density. This is often achieved by designing electrical machines with higher rotational speeds and excitati... Read More about Experimental Statistical Method Predicting AC Losses on Random Windings and PWM Effect Evaluation.

The use of active jet ignition to overcome traditional challenges of pre-chamber combustors under low load conditions (2020)
Journal Article
Bunce, M., Cairns, A., & Blaxill, H. (2021). The use of active jet ignition to overcome traditional challenges of pre-chamber combustors under low load conditions. International Journal of Engine Research, 22(11), 3325-3339. https://doi.org/10.1177/1468087420972555

The need for advanced combustion technologies for use in future highly efficient powertrains in the automotive sector is well understood. Pre-chamber combustors, a technology with numerous historic examples, are fast becoming a major area of research... Read More about The use of active jet ignition to overcome traditional challenges of pre-chamber combustors under low load conditions.