Outputs (31)

Investigating the variation of particle distribution and surface texture of top surfaces based on build position in laser powder bed fusion (2024)
Presentation / Conference Contribution
Sithole, C., Hooshmand, H., Todhunter, L., Thompson, A., Hoekstra, S., Jalalian, A., …Gibson, I. (2024). Investigating the variation of particle distribution and surface texture of top surfaces based on build position in laser powder bed fusion. Procedia CIRP, 123, 446-451. https://doi.org/10.1016/j.procir.2024.05.078

Quality analysis of additively manufactured (AM) surfaces is complex, yet critical for determining the functionality of parts and technology improvement. To accurately assess the quality of AM parts, it is necessary to consider the industrial applica... Read More about Investigating the variation of particle distribution and surface texture of top surfaces based on build position in laser powder bed fusion.

Enhancing single camera calibration results using artificial bee colony optimisation within a virtual environment (2024)
Presentation / Conference Contribution
Khanesar, M. A., Todhunter, L., Pawar, V., Corcoran, H., MacDonald, L., Robson, S., & Piano, S. (2024, June). Enhancing single camera calibration results using artificial bee colony optimisation within a virtual environment. Presented at euspen’s 24th International Conference & Exhibition, Dublin, IE, June 2024, Dublin, Ireland

Close range photogrammetry is among the top candidates for non-contact metrology in high precision applications. It is frequently used within industrial environments for high precision measurement, automation, and control tasks. When using off-the-sh... Read More about Enhancing single camera calibration results using artificial bee colony optimisation within a virtual environment.

Extracting focus variation data from coherence scanning interferometric measurements (2024)
Journal Article
Liu, J., Hooshmand, H., Piano, S., Leach, R., Coupland, J., Ren, M., …Su, R. (2024). Extracting focus variation data from coherence scanning interferometric measurements. Precision Engineering, 88, 699-706. https://doi.org/10.1016/j.precisioneng.2024.04.016

Coherence scanning interferometry (CSI), based on the principle of interference, can achieve sub-nanometer precision for height measurements. On the other hand, focus variation microscopy (FVM), combining the small depth of field of the objective, is... Read More about Extracting focus variation data from coherence scanning interferometric measurements.

Comparison of Fourier optics-based methods for modeling coherence scanning interferometry (2024)
Journal Article
Hooshmand, H., Pahl, T., de Groot, P. J., Lehmann, P., Pappas, A., Su, R., …Piano, S. (2024). Comparison of Fourier optics-based methods for modeling coherence scanning interferometry. Optical Engineering, 63(4), Article 044102. https://doi.org/10.1117/1.OE.63.4.044102

Coherence scanning interferometry (CSI) is a widely used optical method for surface topography measurement of industrial and biomedical surfaces. The operation of CSI can be modeled using approximate physics-based approaches with minimal computationa... Read More about Comparison of Fourier optics-based methods for modeling coherence scanning interferometry.

Assessing the spatial distribution of positional error associated to dense point cloud measurements using regional Gaussian random fields (2024)
Journal Article
Wang, Y., Catalucci, S., Senin, N., & Piano, S. (2024). Assessing the spatial distribution of positional error associated to dense point cloud measurements using regional Gaussian random fields. Measurement, 227, Article 114194. https://doi.org/10.1016/j.measurement.2024.114194

Being able to assess the amount of uncertainty locally associated to dense point clouds generated by measurement can help investigate the relations between the metrological performance of a chosen measuring technology, and the local geometric and sur... Read More about Assessing the spatial distribution of positional error associated to dense point cloud measurements using regional Gaussian random fields.

Vision-based detection and coordinate metrology of a spatially encoded multi-sphere artefact (2023)
Journal Article
Isa, M. A., Leach, R., Branson, D., & Piano, S. (2024). Vision-based detection and coordinate metrology of a spatially encoded multi-sphere artefact. Optics and Lasers in Engineering, 172, Article 107885. https://doi.org/10.1016/j.optlaseng.2023.107885

New developments in vision algorithms prioritise identification and perception over accurate coordinate measurement due to the complex problem of resolving object form and pose from images. Consequently, many vision algorithms for coordinate measurem... Read More about Vision-based detection and coordinate metrology of a spatially encoded multi-sphere artefact.

Dynamic surface displacement measurement using carrier optical vortex interferometer: A numerical study (2023)
Journal Article
Dong, J., Hooshmand, H., Liu, M., & Piano, S. (2023). Dynamic surface displacement measurement using carrier optical vortex interferometer: A numerical study. Optics and Lasers in Engineering, 171, Article 107824. https://doi.org/10.1016/j.optlaseng.2023.107824

The measurement of dynamic surface displacement is crucial in understanding mechanical and thermophysical dynamics at nanometre to micrometre-scale. Interferometers using optical vortices are gaining attention due to their ability to demodulate fring... Read More about Dynamic surface displacement measurement using carrier optical vortex interferometer: A numerical study.

Comparison of approximate methods for modelling coherence scanning interferometry (2023)
Presentation / Conference Contribution
Hooshmand, H., Pahl, T., de Groot, P. J., Lehmann, P., Pappas, A., Su, R., …Piano, S. (2023). Comparison of approximate methods for modelling coherence scanning interferometry. Proceedings of SPIE, 12619, https://doi.org/10.1117/12.2673657

Coherence scanning interferometry (CSI) is a widely used optical method for surface topography measurement of industrial and biomedical surfaces. The operation of CSI can be modelled using approximate physics-based approaches with minimal computation... Read More about Comparison of approximate methods for modelling coherence scanning interferometry.

High-accuracy robotic metrology for precise industrial manipulation tasks (2023)
Presentation / Conference Contribution
Isa, M. A., Khanesar, M. A., Leach, R. K., Branson, D., & Piano, S. (2023). High-accuracy robotic metrology for precise industrial manipulation tasks. . https://doi.org/10.1117/12.2673088

The majority of industrial production processes can be divided into a series of object manipulation and handling tasks that can be adapted for robots. Through significant advances in compliant grasping, sensing and actuation technologies, robots are... Read More about High-accuracy robotic metrology for precise industrial manipulation tasks.

Measurement of powder spreading dynamics in additive manufacturing (2023)
Presentation / Conference Contribution
Ferris, S., Thompson, A., Maskery, I., Hall, S., & Piano, S. (2023). Measurement of powder spreading dynamics in additive manufacturing.

In this work, we examine the effect of the state of the pre-processing powder bed in powder-based additive manufacturing, particularly in metal laser powder bed fusion (PBF-LB). The spreading of the powder layer has been identified as a critical but... Read More about Measurement of powder spreading dynamics in additive manufacturing.