Professor TANVIR HUSSAIN's Outputs (10)

Interaction of CMAS on thermal sprayed ytterbium disilicate environmental barrier coatings: A story of porosity (2021)
Journal Article
Tejero-Martin, D., Romero, A. R., Wellman, R. G., & Hussain, T. (2022). Interaction of CMAS on thermal sprayed ytterbium disilicate environmental barrier coatings: A story of porosity. Ceramics International, 48(6), 8286-8296. https://doi.org/10.1016/j.ceramint.2021.12.033

Molten calcium magnesium alumina-silicates (CMAS) represent a challenge for the current generation of rare earth silicates environmental barrier coatings (EBCs). Their interaction with ytterbium disilicate (Yb2Si2O7) free-standing coatings deposited... Read More about Interaction of CMAS on thermal sprayed ytterbium disilicate environmental barrier coatings: A story of porosity.

Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating (2021)
Journal Article
Leng, K., Rincon Romero, A., Venturi, F., Ahmed, I., & Hussain, T. (2022). Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating. Journal of the European Ceramic Society, 42(4), 1594-1607. https://doi.org/10.1016/j.jeurceramsoc.2021.11.050

Gadolinium zirconate (GZ) is an attractive material for thermal barrier coatings (TBCs). However, a single layer GZ coating has poor thermal cycling life compared to Yttria Stabilized Zirconia (YSZ). In this study, Solution Precursor High Velocity Ox... Read More about Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating.

A convolution-based approach to cold spray additive manufacturing (2021)
Journal Article
Venturi, F., Gilfillan, N., & Hussain, T. (2021). A convolution-based approach to cold spray additive manufacturing. Additive Manufacturing, 1, Article 100014. https://doi.org/10.1016/j.addlet.2021.100014

Cold Spray Additive Manufacturing (CSAM) is a well-established technology that has recently attracted interest for forming 3D shapes in a fast and scalable fashion. Nonetheless, the resulting surface of cold sprayed parts normally requires post-depos... Read More about A convolution-based approach to cold spray additive manufacturing.

Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process (2021)
Journal Article
Bano, S., Rincon Romero, A., Islam, M. T., Grant, D. M., Ahmed, I., & Hussain, T. (2021). Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process. Journal of Thermal Spray Technology, 30(7), 1862-1874. https://doi.org/10.1007/s11666-021-01233-8

Phosphate based glasses (PBGs) are promising materials for biomedical applications due to their biocompatible and fully resorbable characteristics in aqueous environments. These glasses can be coated on to metal substrate via the technique of suspens... Read More about Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process.

Wear performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray (2021)
Journal Article
Derelizade, K., Venturi, F., Wellman, R. G., Kholobysov, A., & Hussain, T. (2021). Wear performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray. Wear, 482-483, Article 203974. https://doi.org/10.1016/j.wear.2021.203974

WC-Co coatings have been used as wear resistant coatings in aero engines for decades, and research is still ongoing to further improve the performance of these coatings through compositional modifications to reduce wear. The coatings are used for unl... Read More about Wear performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray.

YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray (2021)
Journal Article
Owoseni, T. A., Rincon Romero, A., Pala, Z., Venturi, F., Lester, E. H., Grant, D. M., & Hussain, T. (2021). YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray. Ceramics International, 47(17), 23803-23813. https://doi.org/10.1016/j.ceramint.2021.05.087

Yttrium aluminium garnet (YAG) is a promising topcoat material for thermal barrier coatings due to its high temperature stability and better CMAS (calcium-magnesium-alumino-silicate) resistance. YAG topcoats were deposited by suspension and solution... Read More about YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray.

Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques (2021)
Journal Article
Tejero-Martin, D., Bai, M., Mata, J., & Hussain, T. (2021). Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques. Journal of the European Ceramic Society, 41(12), 6035-6048. https://doi.org/10.1016/j.jeurceramsoc.2021.04.020

Porosity is a key parameter on thermal barrier coatings, directly influencing thermal conductivity and strain tolerance. Suspension high velocity oxy-fuel (SHVOF) thermal spraying enables the use of sub-micron particles, increasing control over poros... Read More about Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques.

Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V (2021)
Journal Article
Rojas-Ulloa, C., Bouffioux, C., Jaramillo, A. F., García-Herrera, C. M., Hussain, T., Duchêne, L., Riu, G., Josep Roa, J., Flores, P., Marie Habraken, A., & Tuninetti, V. (2021). Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V. Advanced Engineering Materials, 23(7), Article 2001341. https://doi.org/10.1002/adem.202001341

The nanoindentation‐induced mechanical deformation response is applied to identify the orthotropic elastic moduli using the Delafargue and Ulm method as well as to validate the asymmetric orthotropic CPB06 nonlinear plasticity model required in simul... Read More about Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V.

Fracture behaviour, microstructure, and performance of various layered-structured Al2O3-TiC-WC-Co composites (2021)
Journal Article
Liu, C., Sun, J., Wang, C., Li, F., & Hussain, T. (2021). Fracture behaviour, microstructure, and performance of various layered-structured Al2O3-TiC-WC-Co composites. Ceramics International, 47(14), 19766-19773. https://doi.org/10.1016/j.ceramint.2021.03.315

In this study, layered-structured Al2O3-based composites containing WC-Co, TiC, and MgO additives were prepared using hot-pressing sintering. The best comprehensive mechanical characteristics were acquired for the sample with a layer number (NLN) of... Read More about Fracture behaviour, microstructure, and performance of various layered-structured Al2O3-TiC-WC-Co composites.

Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings (2021)
Journal Article
Venturi, F., Kamnis, S., & Hussain, T. (2021). Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings. Materials and Design, 202, Article 109566. https://doi.org/10.1016/j.matdes.2021.109566

© 2021 The Authors A novel process, relatively fast and scalable compared to existing ones, has been used to incorporate carbon nanotubes (CNT) 0.5 wt% onto commercial WC-Co thermal spray powder. Nano enabled WC-Co/CNT coatings were obtained by inter... Read More about Internal diameter HVOAF thermal spray of carbon nanotubes reinforced WC-Co composite coatings.