Skip to main content

Research Repository

See what's under the surface

Browse


Impact of water-soluble precursors leaching from green beans on aroma generation during coffee roasting (2018)
Conference Proceeding
Liu, C., Yang, N., Linforth, R., & Fisk, I. D. (2018). Impact of water-soluble precursors leaching from green beans on aroma generation during coffee roasting. In Flavour Science: Proceedings of the XV Weurman Flavour Research Symposium, 119-122. doi:10.3217/978-3-85125-593-5-25

In this investigation green Robusta coffee beans were pre-soaked with different time-temperature profiles before roasting in normal conditions and grinding to a standardized particle size. Aroma profile of roasted coffee beans and water soluble precu... Read More about Impact of water-soluble precursors leaching from green beans on aroma generation during coffee roasting.

A staff training intervention to improve communication between people living with dementia and health-care professionals in hospital: the VOICE mixed-methods development and evaluation study (2018)
Journal Article
Harwood, R. H., O'Brien, R., Goldberg, S. E., Allwood, R., Pilnick, A., Beeke, S., …Schneider, J. M. (2018). A staff training intervention to improve communication between people living with dementia and health-care professionals in hospital: the VOICE mixed-methods development and evaluation study. Health Services and Delivery Research, 6(41), doi:10.3310/hsdr06410

Background 25% of hospital beds are occupied by a person living with dementia. Dementia affects expressive communication and understanding. Healthcare professionals report lack of communication skills training. Objectives To identify teachable ef... Read More about A staff training intervention to improve communication between people living with dementia and health-care professionals in hospital: the VOICE mixed-methods development and evaluation study.

Enhancing supervised classifications with metamorphic relations (2018)
Conference Proceeding
Xu, L., Towey, D., French, A. P., Benford, S., Zhou, Z. Q., & Chen, T. Y. (2018). Enhancing supervised classifications with metamorphic relations. In MET '18: Proceedings of the 3rd International Workshop on Metamorphic Testing, 46-53. doi:10.1145/3193977.3193978

We report on a novel use of metamorphic relations (MRs) in machine learning: instead of conducting metamorphic testing, we use MRs for the augmentation of the machine learning algorithms themselves. In particular, we report on how MRs can enable enha... Read More about Enhancing supervised classifications with metamorphic relations.

‘I like the “outernet” stuff:’ girls’ perspectives on physical activity and their environments (2018)
Journal Article
Coen, S. E., Mitchell, C. A., Tillmann, S., & Gilliland, J. A. (2019). ‘I like the “outernet” stuff:’ girls’ perspectives on physical activity and their environments. Qualitative Research in Sport, Exercise and Health, 11(5), 599-617. doi:10.1080/2159676x.2018.1561500

Physical activity in Canada mirrors the gender gap observed globally, with boys more likely than girls to meet recommended guidelines. While a growing body of research has examined the relationships between environmental factors and children’s physic... Read More about ‘I like the “outernet” stuff:’ girls’ perspectives on physical activity and their environments.

Sensorless Control of a Fault-tolerant Multi-level PMSM Drive (2018)
Journal Article
Saleh, K., & Sumner, M. (2018). Sensorless Control of a Fault-tolerant Multi-level PMSM Drive. TELKOMNIKA (Telecommunication, Computing, Electronics and Control), 16(6), 2930-2942

This paper presents a new technique to track the saliency position in a permanent magnet synchronous motor (PMSM) post a single phase open-circuit fault. The PMSM is driven by a fault-tolerant multi-level inverter that is utilized to implement a faul... Read More about Sensorless Control of a Fault-tolerant Multi-level PMSM Drive.

'Frontier Climbing' in the Wild, Wild East (2018)
Book Chapter
Bott, E. (2018). 'Frontier Climbing' in the Wild, Wild East. In H. Saul, & E. Waterton (Eds.), Affective Geographies of Transformation, Exploration and Adventure: Rethinking FrontiersTaylor & Francis

This chapter explores certain tensions in the often contradictory and always subjective notions of 'adventures' and 'frontiers' in overlapping dimensions through the context of rock-climbing tourism in Li Ming in remote southern China. It also explor... Read More about 'Frontier Climbing' in the Wild, Wild East.

Can flavour enhancement modulate appetite and food intake in women? (2018)
Conference Proceeding
Yin, W., Fisk, I., Hewson, L., Linforth, R., & Taylor, M. (2018). Can flavour enhancement modulate appetite and food intake in women?. In Flavour Science: Proceedings of the XV Weurman Flavour Research Symposium, 269-274. doi:10.3217/978-3-85125-593-5-57

Food flavour might be helpful for weight management by regulating appetite sensation and food intake. This chapter investigated whether the enhancement of flavour intensity or flavour complexity can modulate appetite sensation and food intake within... Read More about Can flavour enhancement modulate appetite and food intake in women?.

Explicit-in-time goal-oriented adaptivity (2018)
Journal Article
Muñoz-Matute, J., Calo, V. M., Pardo, D., Alberdi, E., & Van Der Zee, K. (2019). Explicit-in-time goal-oriented adaptivity. Computer Methods in Applied Mechanics and Engineering, doi:10.1016/j.cma.2018.12.028

Goal-oriented adaptivity is a powerful tool to accurately approximate physically relevant solution features for Partial Differential Equations. In time dependent problems, we seek to represent the error in the quantity of interest as an integral over... Read More about Explicit-in-time goal-oriented adaptivity.

3D simulation and parametric analysis of polymer melt flowing through spiral mandrel die for pipe extrusion (2018)
Journal Article
Nie, Y., Hao, J., Lin, Y., & Sun, W. (2018). 3D simulation and parametric analysis of polymer melt flowing through spiral mandrel die for pipe extrusion. Advances in Polymer Technology, 37(8), 3882-3895

With the increasing demands for large scale and high productivity, polymer pipes are recently produced using the advanced spiral mandrel dies. However, the fundamental research related to polymer melt flow mechanism in the spiral mandrel die for pipe... Read More about 3D simulation and parametric analysis of polymer melt flowing through spiral mandrel die for pipe extrusion.

Bayes Factors for Partially Observed Stochastic Epidemic Models (2018)
Journal Article
Alharthi, M., Kypraios, T., & O'Neill, P. (2019). Bayes Factors for Partially Observed Stochastic Epidemic Models. Bayesian Analysis, 14(3), 927-956. doi:10.1214/18-BA1134

We consider the problem of model choice for stochastic epidemic models given partial observation of a disease outbreak through time. Our main focus is on the use of Bayes factors. Although Bayes factors have appeared in the epidemic modelling literat... Read More about Bayes Factors for Partially Observed Stochastic Epidemic Models.

A probabilistic approach for trade-off analysis of composite wing structures at the conceptual phase of design (2018)
Conference Proceeding
Bacharoudis, K., Turner, T., Popov, A., & Ratchev, S. (2019). A probabilistic approach for trade-off analysis of composite wing structures at the conceptual phase of design. In S. Ratchev (Ed.), Precision Assembly in the Digital Age, 103-113. doi:10.1007/978-3-030-05931-6_10

One of the major elements when performing a design for manufacturing and assembly methodology is the cost modelling method. A probabilistic cost approach is introduced herein for the series production of a composite wing structure. The proposed metho... Read More about A probabilistic approach for trade-off analysis of composite wing structures at the conceptual phase of design.

The Communist party (2018)
Book Chapter
Phelps, C. (2018). The Communist party. In I. Takayoshi (Ed.), American Literature in Transition: The 1930s, 421-435. Cambridge University Press (CUP). doi:10.1017/9781108563895.023

In the Great Depression, numerous American writers and intellectuals were attracted to the Communist Party of the United States of America (CPUSA). This chapter provides an institutional analysis of that political-literary experience, arguing that i... Read More about The Communist party.

Deployment of a distributed multi-agent architecture for transformable assembly (2018)
Conference Proceeding
Chaplin, J. C., & Ratchev, S. (2018). Deployment of a distributed multi-agent architecture for transformable assembly. In Precision assembly in the digital age, 15-28. doi:10.1007/978-3-030-05931-6_2

Industry 4.0 represents a new philosophy in manufacturing systems, based on networked, intelligent, and cooperative resources. This revolution is necessary to make the cost-effective production of batch-size-of-one customised items in high-value manu... Read More about Deployment of a distributed multi-agent architecture for transformable assembly.

"Emile Guimet's Network for Research and Collecting Asian Objects, ca.1877-1918" (2018)
Book Chapter
Chang, T. (2018). "Emile Guimet's Network for Research and Collecting Asian Objects, ca.1877-1918". In C. Howald, C. Guichard, & B. Savoy (Eds.), Acquiring Cultures: Histories of World Art on Western Markets, 209-222. De Gruyter

This article examines the early history of the first national museum in France devoted to the arts and religions of Asia, the Musée Guimet, created in 1879. Through extensive archival research in unpublished sources it is revealed that the founder Em... Read More about "Emile Guimet's Network for Research and Collecting Asian Objects, ca.1877-1918".

A Low-Cost Automated Fastener Painting Method Based on Machine Vision (2018)
Conference Proceeding
Zhao, R., Drouot, A., Griffin, J., Crossley, R., & Ratchev, S. (2019). A Low-Cost Automated Fastener Painting Method Based on Machine Vision. In S. Ratchev (Ed.), Precision Assembly in the Digital Age: 8th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2018, Chamonix, France, January 14—16, 2018, Revised Selected Papers, 92-100. https://doi.org/10.1007/978-3-030-05931-6_9

Fastener painting of aerospace structures, in particular legacy products , relies heavily on the skill or rather craftsmanship of the human operator. This process is time-consuming while automated operations with industrial robots can be a more effic... Read More about A Low-Cost Automated Fastener Painting Method Based on Machine Vision.

Bond behavior degradation between FRP and masonry under aggressive environmental conditions (2018)
Journal Article
Ramirez, R., Maljaee, H., Ghiassi, B., Lourenço, P. B., & Oliveira, D. V. (2018). Bond behavior degradation between FRP and masonry under aggressive environmental conditions. Mechanics of Advanced Materials and Structures, 26(1), 6-14. doi:10.1080/15376494.2018.1534164

Application of Fibre Reinforced Polymers (FRPs) as external reinforcement for masonry structures has been found to be a promising technique, but the long-term behavior of such systems still needs attention. This study presents an overview of the expe... Read More about Bond behavior degradation between FRP and masonry under aggressive environmental conditions.

Social meaning in the perception of neutral tone variation in Putonghua (2018)
Journal Article
Zhao, H. (2018). Social meaning in the perception of neutral tone variation in Putonghua. Asia-Pacific Language Variation, 4(2), 161-196. https://doi.org/10.1075/aplv.18003.zha

This study investigates the perception of the variation of neutral tone, a phonetic feature in China’s official language, Putonghua. Specifically, I explore whether native listeners perceive social meanings such as standardness, regional-ness, status... Read More about Social meaning in the perception of neutral tone variation in Putonghua.