All Outputs (5667)

Modulated Self-Assembly of Catalytically Active Metal–Organic Nanosheets Containing Zr6 Clusters and Dicarboxylate Ligands (2024)
Journal Article
Prasad, R. R. R., Boyadjieva, S. S., Zhou, G., Tan, J., Firth, F. C. N., Ling, S., …Forgan, R. S. (2024). Modulated Self-Assembly of Catalytically Active Metal–Organic Nanosheets Containing Zr6 Clusters and Dicarboxylate Ligands. ACS Applied Materials and Interfaces, 16(14), 17812–17820. https://doi.org/10.1021/acsami.4c00604

Two-dimensional metal–organic nanosheets (MONs) have emerged as attractive alternatives to their three-dimensional metal–organic framework (MOF) counterparts for heterogeneous catalysis due to their greater external surface areas and higher accessibi... Read More about Modulated Self-Assembly of Catalytically Active Metal–Organic Nanosheets Containing Zr6 Clusters and Dicarboxylate Ligands.

Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study (2024)
Presentation / Conference Contribution
Tang, C., & Marshall, A. M. (2024, October). Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study. Presented at 5th European Conference on Physical Modelling in Geotechnics ECPMG 2024, Delft, Netherlands

In this study, a novel coupled centrifuge-numerical modelling (CCNM) approach of shallow strip foundations developed at the University of Nottingham Centre for Geomechanics (NCG) is used to study the response of masonry building behaviour during tunn... Read More about Effect of elastic modulus on masonry buildings during tunnelling: a coupled centrifuge-numerical modelling study.

Model predictive control for Vienna rectifier with constant frequency based on inductance parameters online identification (2024)
Journal Article
Dang, C., Wang, Y., Jiang, Z., Liu, D., Tong, X., Wheeler, P., & Xin, Y. (2024). Model predictive control for Vienna rectifier with constant frequency based on inductance parameters online identification. Journal of The Franklin Institute, 361(7), Article 106795. https://doi.org/10.1016/j.jfranklin.2024.106795

When the finite control set model predictive control (FCS-MPC) is applied to the three-level converter, there are problems such as large current harmonics, high requirements for the computing efficiency of the microcontroller, complex multi-objective... Read More about Model predictive control for Vienna rectifier with constant frequency based on inductance parameters online identification.

Scalable bioreactor production of an O2‐protected [FeFe]‐hydrogenase enables simple aerobic handling for clean chemical synthesis (2024)
Journal Article
Cleary, S. E., Hall, S. J., Galan-Bataller, R., Lurshay, T. C., Hancox, C., Williamson, J. J., Heap, J. T., Reeve, H. A., & Morra, S. (in press). Scalable bioreactor production of an O2‐protected [FeFe]‐hydrogenase enables simple aerobic handling for clean chemical synthesis. ChemCatChem, https://doi.org/10.1002/cctc.202400193

The enzyme CbA5H, a [FeFe]-hydrogenase from Clostridium beijerinckii, has previously been shown to survive exposure to oxygen, making it a promising candidate for biotechnological applications. Thus far [NiFe]-hydrogenases are typically considered fo... Read More about Scalable bioreactor production of an O2‐protected [FeFe]‐hydrogenase enables simple aerobic handling for clean chemical synthesis.

Driving next generation manufacturing through advanced metals characterisation capability (2024)
Journal Article
Clare, A., Seita, M., Speidel, A., Collins, P., & Clark, M. (2024). Driving next generation manufacturing through advanced metals characterisation capability. Scripta Materialia, 246, Article 116009. https://doi.org/10.1016/j.scriptamat.2024.116009

Understanding the effects of manufacturing methods upon materials has driven constant innovation for over 300 years. While our ability to fabricate metallurgical wonders extends into the annals of history our ability to understand the scientific prin... Read More about Driving next generation manufacturing through advanced metals characterisation capability.

Research and innovation identified to decarbonise the maritime sector (2024)
Journal Article
Ling-Chin, J., Simpson, R., Cairns, A., Wu, D., Xie, Y., Song, D., …Roskilly, A. P. (2024). Research and innovation identified to decarbonise the maritime sector. Green Energy and Sustainability, 4(1), Article 1. https://doi.org/10.47248/ges2404010001

The maritime sector requires technically, environmentally, socially, and economically informed pathways to decarbonise and eliminate all emissions harmful to the environment and health. This is extremely challenging and complex, and a wide range of t... Read More about Research and innovation identified to decarbonise the maritime sector.

A study of membrane correction accounting for both curvature and tension in DEM simulations of triaxial tests of sand and ballast with two alternative flexible membrane models (2024)
Journal Article
Tolomeo, M., & McDowell, G. R. (2024). A study of membrane correction accounting for both curvature and tension in DEM simulations of triaxial tests of sand and ballast with two alternative flexible membrane models. Granular Matter, 26(2), Article 47. https://doi.org/10.1007/s10035-024-01419-1

In DEM simulations of triaxial tests, modelling a flexible lateral membrane is crucial and challenging. It is essential for the correct application of a uniform lateral pressure and for an accurate measurement of sample volume. Here, we introduce a m... Read More about A study of membrane correction accounting for both curvature and tension in DEM simulations of triaxial tests of sand and ballast with two alternative flexible membrane models.

Dicalcium ferrite: A chemical heat pump in integrated carbon capture and chemical looping combustion for the steel industry (2024)
Journal Article
Sukma, M. S., Zheng, Y., & Scott, S. A. (2024). Dicalcium ferrite: A chemical heat pump in integrated carbon capture and chemical looping combustion for the steel industry. Chemical Engineering Journal, 488, Article 150658. https://doi.org/10.1016/j.cej.2024.150658

An integrated calcium and chemical looping combustion using dicalcium ferrite (Ca2Fe2O5, C2F), a mixed phase from iron and calcium oxides, is proposed here to remove carbon (CO + CO2) contained in the blast furnace gas from the steel industry. C2F is... Read More about Dicalcium ferrite: A chemical heat pump in integrated carbon capture and chemical looping combustion for the steel industry.

Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma (2024)
Journal Article
Wongrakpanich, A., Bui Thi Thu, H., Sakchaisri, K., Taresco, V., Cuzzucoli Crucitti, V., Bunsupa, S., & Suksiriworapong, J. (2024). Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma. Journal of Drug Delivery Science and Technology, 95, Article 105610. https://doi.org/10.1016/j.jddst.2024.105610

This study explored the co-delivery of curcumin (CUR) and resveratrol (RV) using folic acid-conjugated poly(glycerol adipate)-based nanoparticles (FPPC NPs) to enhance their synergistic anticancer effects against osteosarcoma. Based on synergistic to... Read More about Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma.

Exploring Opportunities for Vehicle-to-Grid Implementation through Demonstration Projects (2024)
Journal Article
Waldron, J., Rodrigues, L., Deb, S., Gillott, M., Naylor, S., & Rimmer, C. (2024). Exploring Opportunities for Vehicle-to-Grid Implementation through Demonstration Projects. Energies, 17(7), Article 1549. https://doi.org/10.3390/en17071549

Global warming, pollution, and increasing energy demand have compelled electrification of the transport sector. Electric vehicles are not only an attractive and cleaner mode of transport, but they also possess the capacity to offer flexible storage a... Read More about Exploring Opportunities for Vehicle-to-Grid Implementation through Demonstration Projects.

Novel drugs approved by the EMA, the FDA, and the MHRA in 2023: A year in review (2024)
Journal Article
Papapetropoulos, A., Topouzis, S., Alexander, S. P. H., Cortese‐Krott, M., Kendall, D. A., Martemyanov, K. A., …Ferdinandy, P. (2024). Novel drugs approved by the EMA, the FDA, and the MHRA in 2023: A year in review. British Journal of Pharmacology, 181(11), 1553-1575. https://doi.org/10.1111/bph.16337

In 2023, seventy novel drugs received market authorization for the first time in either Europe (by the EMA and the MHRA) or in the United States (by the FDA). Confirming a steady recent trend, more than half of these drugs target rare diseases or int... Read More about Novel drugs approved by the EMA, the FDA, and the MHRA in 2023: A year in review.

Effects of embedded walls on tunnelling-induced sandy ground displacements: a numerical investigation (2024)
Journal Article
Xu, J., Zheng, L., Song, G., Zhang, D., Sheil, B., & Marshall, A. M. (2024). Effects of embedded walls on tunnelling-induced sandy ground displacements: a numerical investigation. Géotechnique, https://doi.org/10.1680/jgeot.23.00307

Urban tunnelling projects pose significant risks to the integrity of nearby structures due to ground movements induced by the excavation process. Embedded walls are commonly employed as a protective measure to mitigate these adverse effects. This pap... Read More about Effects of embedded walls on tunnelling-induced sandy ground displacements: a numerical investigation.

Setup and calibration of piles with FBG strain sensors in a geotechnical centrifuge = Configuration et calibration de pieux équipés de capteurs de deformation FBG dans une centrifugeuse géotechnique (2024)
Presentation / Conference Contribution
Tang, C., Marshall, A. M., Heron, C. M., Franza, A., & Xu, J. (2024, August). Setup and calibration of piles with FBG strain sensors in a geotechnical centrifuge = Configuration et calibration de pieux équipés de capteurs de deformation FBG dans une centrifugeuse géotechnique. Presented at XVIII European Conference on Soil Mechanics and Geotechnical Engineering, Lisbon, Portugal

This paper discusses technical aspects of the experimental setup and calibration processing during centrifuge testing of single piles, instrumented with fibre Bragg grating (FBG) strain sensors, under vertical loads. Results illustrate the influence... Read More about Setup and calibration of piles with FBG strain sensors in a geotechnical centrifuge = Configuration et calibration de pieux équipés de capteurs de deformation FBG dans une centrifugeuse géotechnique.

Robust gesture recognition method toward intelligent environment using Wi-Fi signals (2024)
Journal Article
Ding, X., Yu, X., Zhong, Y., Xie, W., Cai, B., You, M., & Jiang, T. (2024). Robust gesture recognition method toward intelligent environment using Wi-Fi signals. Measurement, 231, Article 114525. https://doi.org/10.1016/j.measurement.2024.114525

Wi-Fi-based gesture recognition represents an emerging paradigm of human–computer interaction. While deep learning-based and model-based solutions are crucial for improving accuracy and generalization performance, they often depend heavily on extensi... Read More about Robust gesture recognition method toward intelligent environment using Wi-Fi signals.

Design and implementation of a cost-aware and smart oyster mushroom cultivation system (2024)
Journal Article
Elewi, A., Hajhamed, A., Khankan, R., Duman, S., Souag, A., & Ahmed, A. (2024). Design and implementation of a cost-aware and smart oyster mushroom cultivation system. Smart Agricultural Technology, 8, Article 100439. https://doi.org/10.1016/j.atech.2024.100439

Mushrooms are a nutritious food source, which can play a crucial role in providing affordable sources of proteins, vitamins and minerals for people worldwide, but their cultivation requires extensive training and considerable relevant expertise in or... Read More about Design and implementation of a cost-aware and smart oyster mushroom cultivation system.

A Compact High-Gain 28 GHz Antenna Array for Beyond 5G Wireless Networks (2024)
Presentation / Conference Contribution
Meates, I., Alkaraki, S., Aslam, M., Abbasi, Q., Evans, A., & Jilani, S. F. (2024, March). A Compact High-Gain 28 GHz Antenna Array for Beyond 5G Wireless Networks. Paper presented at 2024 18th European Conference on Antennas and Propagation (EuCAP), Glasgow, United Kingdom

In this paper a novel, high-gain corporate-fed 16-element circular patch array featuring a coplanar waveguide (CPW) feed and parasitic loop is proposed for beyond 5G and future 6G applications. An ultra-thin Rogers RO4003C substrate of 0.02 mm thickn... Read More about A Compact High-Gain 28 GHz Antenna Array for Beyond 5G Wireless Networks.

Liquid Metal Reconfigurable Phased Array Antenna (2024)
Presentation / Conference Contribution
Alkaraki, S., Lin, Q. W., Erman, F., Jilani, S. F., Wang, Z., Wong, H., & Kelly, J. R. (2024, March). Liquid Metal Reconfigurable Phased Array Antenna. Paper presented at 2024 18th European Conference on Antennas and Propagation (EuCAP), Glasgow, United Kingdom

A design for a phased array antenna using liquid metal (LM) technology is presented. The phased array antenna uses substrate integrated waveguides (SIW) feeding structure to excite a 1×4 printed dipole antenna array. The phase distribution on SIW pow... Read More about Liquid Metal Reconfigurable Phased Array Antenna.

Electricity Generation under the Climate Change Situation in Latin America: Trends and Challenges (2024)
Journal Article
Undurraga, J. P., Rivera, M., Cossutta, P., Garcés, A., Ayala, M., García, L. Y., & Wheeler, P. (2024). Electricity Generation under the Climate Change Situation in Latin America: Trends and Challenges. International Journal of Energy Economics and Policy, 14(2), 535-545. https://doi.org/10.32479/ijeep.15226

In a scenario of energy inequality, countries require stability for development and quality of life for their inhabitants. This paper addresses the reality of access to electrical energy and the effect of climate change on the potential of renewables... Read More about Electricity Generation under the Climate Change Situation in Latin America: Trends and Challenges.

Experimental investigation of low-temperature fluidised bed thermochemical energy storage with salt-mesoporous silica composite materials (2024)
Journal Article
Liu, X., Liu, X., Yang, F., & Wu, Y. (2024). Experimental investigation of low-temperature fluidised bed thermochemical energy storage with salt-mesoporous silica composite materials. Applied Energy, 362, Article 122953. https://doi.org/10.1016/j.apenergy.2024.122953

Low-temperature thermochemical energy storage (TCES) with composites ‘salt in porous matrix’ (CSPMs) is widely recognized as a sustainable and efficient solution for harnessing low-grade heat and off-peak electricity. However, many high-performance C... Read More about Experimental investigation of low-temperature fluidised bed thermochemical energy storage with salt-mesoporous silica composite materials.

A novel integration of supplementary photovoltaic module into compound parabolic concentrator for accelerated defrosting of solar collecting system (2024)
Journal Article
Chang, Z., Liu, X., Guo, Z., Hou, J., & Su, Y. (2024). A novel integration of supplementary photovoltaic module into compound parabolic concentrator for accelerated defrosting of solar collecting system. Renewable Energy, 225, Article 120316. https://doi.org/10.1016/j.renene.2024.120316

In order to improve the temperature of solar greenhouse in winter and reduce the cost and energy consumption of traditional heating methods for solar greenhouse. This study presents a novel compound parabolic concentrator (CPC) coupled with a supplem... Read More about A novel integration of supplementary photovoltaic module into compound parabolic concentrator for accelerated defrosting of solar collecting system.