Skip to main content

Research Repository

Advanced Search

All Outputs (657)

Experimental investigation into the integration of solid desiccant packed beds with oscillating heat pipes for energy efficient isothermal adsorption processes (2020)
Journal Article
Yeboah, S. K., & Darkwa, J. (2021). Experimental investigation into the integration of solid desiccant packed beds with oscillating heat pipes for energy efficient isothermal adsorption processes. Thermal Science and Engineering Progress, 21, Article 100791. https://doi.org/10.1016/j.tsep.2020.100791

The heat of adsorption released during physical adsorption of water vapour on solid desiccants increases its surface vapour pressure consequently decreasing its adsorption capacity. In packed beds, this raises the bed temperature subsequently increas... Read More about Experimental investigation into the integration of solid desiccant packed beds with oscillating heat pipes for energy efficient isothermal adsorption processes.

Porous ceramics: Light in weight but heavy in energy and environment technologies (2020)
Journal Article
Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y. (2021). Porous ceramics: Light in weight but heavy in energy and environment technologies. Materials Science and Engineering: R: Reports, 143, Article 100589. https://doi.org/10.1016/j.mser.2020.100589

Benefitting from the combined properties of intrinsic ceramic materials and advanced porous configuration, lightweight porous ceramics with porosity ranging from 2.3 to 99% and pore size distribution within 3 nm - 3 mm exhibit low density, large spec... Read More about Porous ceramics: Light in weight but heavy in energy and environment technologies.

Passive control of temperature distribution in cancerous tissue during photothermal therapy using optical phase change nanomaterials (2020)
Journal Article
Ren, Y., Chen, Q., Li, H., Qi, H., & Yan, Y. (2021). Passive control of temperature distribution in cancerous tissue during photothermal therapy using optical phase change nanomaterials. International Journal of Thermal Sciences, 161, Article 106754. https://doi.org/10.1016/j.ijthermalsci.2020.106754

Thermal therapy is a very promising alternative treatment for benign tumor, in which the temperature control is a key issue to avoid unwanted thermal damage of healthy tissue. However, the active temperature control methods usually require the assist... Read More about Passive control of temperature distribution in cancerous tissue during photothermal therapy using optical phase change nanomaterials.

Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale (2020)
Journal Article
Liu, Q., Liao, Z., & Axinte, D. (2020). Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale. International Journal of Machine Tools and Manufacture, 159(Part B), Article 103620. https://doi.org/10.1016/j.ijmachtools.2020.103620

© 2020 Elsevier Ltd Soft-brittle crystals, e.g. KH2PO4 (KDP), are difficult-to-cut due to their high brittleness which can easily generate crack during the machining process. The conventional method to machine this kind of material is by inducing duc... Read More about Temperature effect on the material removal mechanism of soft-brittle crystals at nano/micron scale.

Implementation of Passive Radiative Cooling Technology in Buildings: A Review (2020)
Journal Article
Suhendri, S., Hu, M., Su, Y., Darkwa, J., & Riffat, S. (2020). Implementation of Passive Radiative Cooling Technology in Buildings: A Review. Buildings, 10(12), 1-28. https://doi.org/10.3390/buildings10120215

Radiative cooling (RC) is attracting more interest from building engineers and architects. Using the sky as the heat sink, a radiative cooling material can be passively cooled by emitting heat to the sky. As a result of the development of material te... Read More about Implementation of Passive Radiative Cooling Technology in Buildings: A Review.

Industrial Robots 4.0 (2020)
Book Chapter
Fassi, I., Pio Negri, S., Pagano, C., Rebaioli, L., & Valori, M. (2020). Industrial Robots 4.0. In J. Chaplin, C. Pagano, & S. Fort (Eds.), Digital Manufacturing for SMEs: An Introduction (191-212). Digit-T. https://doi.org/10.17639/vjvt-7681

Informing the Development of a Digital Health Platform Through Universal Points of Care: Qualitative Survey Study (2020)
Journal Article
Craven, M. P., Andrews, J., Lang, A. R., Simblett, S. K., Bruce, S., Thorpe, S., …The RADAR-CNS Consortium. (2020). Informing the Development of a Digital Health Platform Through Universal Points of Care: Qualitative Survey Study. JMIR Formative Research, 4(11), Article e22756. https://doi.org/10.2196/22756

Background: Epilepsy, multiple sclerosis (MS), and depression are chronic conditions where technology holds potential in clinical monitoring and self-management. Over 5 years, the Remote Assessment of Disease and Relapse-Central Nervous System (RADAR... Read More about Informing the Development of a Digital Health Platform Through Universal Points of Care: Qualitative Survey Study.

Pseudo‐Waveform‐Selective Metasurfaces and their Limited Performance (2020)
Journal Article
Nakasha, T., Phang, S., & Wakatsuchi, H. (2021). Pseudo‐Waveform‐Selective Metasurfaces and their Limited Performance. Advanced Theory and Simulations, 4(1), Article 2000187. https://doi.org/10.1002/adts.202000187

Abstract In recent years, metasurfaces composed of lumped circuit components, including nonlinear Schottky diodes, have been reported to be capable of sensing particular electromagnetic waves even at the same frequency depending on their waveforms, o... Read More about Pseudo‐Waveform‐Selective Metasurfaces and their Limited Performance.

Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design (2020)
Journal Article
Wang, F., Liang, Y., Zhao, O., & Young, B. (2021). Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design. Engineering Structures, 228, Article 111418. https://doi.org/10.1016/j.engstruct.2020.111418

The structural performance and compression resistances of pin-ended press-braked S960 ultra-high strength steel (UHSS) angle section columns have been studied based on experiments and numerical modelling, and are reported in the present paper. An exp... Read More about Pin-ended press-braked S960 ultra-high strength steel angle section columns: Testing, numerical modelling and design.

Machine Learning Based Correction Model in PMSM Power Loss Estimation for More-Electric Aircraft Applications (2020)
Presentation / Conference Contribution
Gao, Y., Yang, T., Wang, X., Bozhko, S., & Wheeler, P. (2020). Machine Learning Based Correction Model in PMSM Power Loss Estimation for More-Electric Aircraft Applications. In 2020 23rd International Conference on Electrical Machines and Systems (ICEMS) (1940-1944). https://doi.org/10.23919/ICEMS50442.2020.9290844

This study utilizes the machine learning (ML) technique to estimate the power loss of surface-mounted Permanent Magnet Synchronous Motor (PMSM) for More-Electric Aircraft (MEA). Existing approaches do not consider ML methods in power loss calculation... Read More about Machine Learning Based Correction Model in PMSM Power Loss Estimation for More-Electric Aircraft Applications.

Experimental Statistical Method Predicting AC Losses on Random Windings and PWM Effect Evaluation (2020)
Journal Article
Preci, E., Valente, G., Galassini, A., Yuan, X., Degano, M., Gerada, D., …Gerada, C. (2021). Experimental Statistical Method Predicting AC Losses on Random Windings and PWM Effect Evaluation. IEEE Transactions on Energy Conversion, 36(3), 2287-2296. https://doi.org/10.1109/TEC.2020.3040265

Nowadays, one of the challenges in transport electrification is the reduction of the components' size and weight in order to improve the power density. This is often achieved by designing electrical machines with higher rotational speeds and excitati... Read More about Experimental Statistical Method Predicting AC Losses on Random Windings and PWM Effect Evaluation.

Design of a resonant Luneburg lens for surface acoustic waves (2020)
Journal Article
Fuentes-Domínguez, R., Yao, M., Colombi, A., Dryburgh, P., Pieris, D., Jackson-Crisp, A., …Clark, M. (2021). Design of a resonant Luneburg lens for surface acoustic waves. Ultrasonics, 111, Article 106306. https://doi.org/10.1016/j.ultras.2020.106306

© 2020 In this work we employ additive manufacturing to print a circular array of micropillars on an aluminium slab turning its top surface into a graded index metasurface for surface acoustic waves (SAW). The graded metasurface reproduces a Luneburg... Read More about Design of a resonant Luneburg lens for surface acoustic waves.