Skip to main content

Research Repository

Advanced Search

All Outputs (586)

Cooperative continuum robots: Enhancing individual continuum arms by reconfiguring into a parallel manipulator (2021)
Journal Article
Russo, M., Sriratanasak, N., Ba, W., Dong, X., Mohammad, A., & Axinte, D. (2022). Cooperative continuum robots: Enhancing individual continuum arms by reconfiguring into a parallel manipulator. IEEE Robotics and Automation Letters, 7(2), 1558-1565. https://doi.org/10.1109/LRA.2021.3139371

Continuum robots are able of in-situ inspection tasks in cluttered environments and narrow passages, where conventional robots and human operators cannot intervene. However, such intervention often requires the robot to interact with the environment,... Read More about Cooperative continuum robots: Enhancing individual continuum arms by reconfiguring into a parallel manipulator.

Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices (2021)
Journal Article
He, Y., Luckett, J., Begines, B., Dubern, J. F., Hook, A. L., Prina, E., …Wildman, R. D. (2022). Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices. Biomaterials, 281, Article 121350. https://doi.org/10.1016/j.biomaterials.2021.121350

Chronic infection as a result of bacterial biofilm formation on implanted medical devices is a major global healthcare problem requiring new biocompatible, biofilm-resistant materials. Here we demonstrate how bespoke devices can be manufactured throu... Read More about Ink-jet 3D printing as a strategy for developing bespoke non-eluting biofilm resistant medical devices.

Cost, context, or convenience? Exploring the social acceptance of demand response in the United Kingdom (2021)
Journal Article
Naghiyev, E., Shipman, R., Goulden, M., Gillott, M., & Spence, A. (2022). Cost, context, or convenience? Exploring the social acceptance of demand response in the United Kingdom. Energy Research and Social Science, 87, Article 102469. https://doi.org/10.1016/j.erss.2021.102469

The energy sector, and buildings in particular, are one of the main contributors to climate change. Demand-Side Management (DSM) has the potential to realise energy savings on the demand as well as the supply side. However, the domestic sector still... Read More about Cost, context, or convenience? Exploring the social acceptance of demand response in the United Kingdom.

Specialty natural rubber latex foam: foamability study and fabrication process (2021)
Journal Article
Ramli, R., Chai, A. B., Ho, J. H., Kamaruddin, S., Rasdi, F. R. M., & De Focatiis, D. S. A. (2022). Specialty natural rubber latex foam: foamability study and fabrication process. Rubber Chemistry and Technology, 95(3), 492-513. https://doi.org/10.5254/rct.21.78938

Specialty natural rubber (SpNR) latex namely deproteinized natural rubber (DPNR) latex and epoxidized natural rubber (ENR) latex have been produced to meet specific product’s requirements. However, SpNR is normally used in the form of block rubber to... Read More about Specialty natural rubber latex foam: foamability study and fabrication process.

Aerodynamic and heat transfer performances of a highly loaded transonic turbine rotor with upstream generic rim seal cavity (2021)
Journal Article
Mansouri, Z. (2021). Aerodynamic and heat transfer performances of a highly loaded transonic turbine rotor with upstream generic rim seal cavity. Propulsion and Power Research, 10(4), 317-331. https://doi.org/10.1016/j.jppr.2021.11.003

In turbine disk cavity, rim seals are fitted between the stator and its adjacent rotor disk. A coolant air injected through the turbine disk cavity to prevent the ingress of mainstream hot gases. The purpose of this paper is to investigate numericall... Read More about Aerodynamic and heat transfer performances of a highly loaded transonic turbine rotor with upstream generic rim seal cavity.

Prospects of Bioenergy Production for Sustainable Rural Development in Ghana (2021)
Journal Article
Nelson, N., Darkwa, J., & Calautit, J. (2021). Prospects of Bioenergy Production for Sustainable Rural Development in Ghana. Journal of Sustainable Bioenergy Systems, 11(04), 227-259. https://doi.org/10.4236/jsbs.2021.114015

Biomass supplies about 80% of the energy needs for cooking and heating in rural Ghana. It is predominantly used in traditional and inefficient forms (firewood and charcoal), which presents environmental and health concerns. In order to better the liv... Read More about Prospects of Bioenergy Production for Sustainable Rural Development in Ghana.

The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing (2021)
Journal Article
Hu, Q., Rance, G. A., Trindade, G. F., Pervan, D., Jiang, L., Foerster, A., …Wildman, R. D. (2022). The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing. Additive Manufacturing, 51, Article 102575. https://doi.org/10.1016/j.addma.2021.102575

Two-photon polymerisation (2PP) based additive manufacturing has emerged as a powerful technology to fabricate complex three-dimensional micro- and nanoscale architectures. However, a comprehensive understanding of the effect of printing parameters o... Read More about The influence of printing parameters on multi-material two-photon polymerisation based micro additive manufacturing.

Real-time monitoring of occupancy activities and window opening within buildings using an integrated deep learning-based approach for reducing energy demand (2021)
Journal Article
Tien, P. W., Wei, S., Calautit, J. K., Darkwa, J., & Wood, C. (2022). Real-time monitoring of occupancy activities and window opening within buildings using an integrated deep learning-based approach for reducing energy demand. Applied Energy, 308, Article 118336. https://doi.org/10.1016/j.apenergy.2021.118336

Occupancy behaviour in buildings can impact the energy performance and operation of heating, ventilation and air-conditioning (HVAC) systems. HVAC, which uses conventional control strategies or “fixed” setpoint schedules, could not adjust to the cond... Read More about Real-time monitoring of occupancy activities and window opening within buildings using an integrated deep learning-based approach for reducing energy demand.

Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms (2021)
Journal Article
Wang, Z., Wang, Y., Gomes, R. L., & Gomes, H. I. (2022). Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms. Journal of Hazardous Materials, 427, Article 128122. https://doi.org/10.1016/j.jhazmat.2021.128122

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, diffe... Read More about Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms.

Review on the Traditional and Integrated Passives: State-of-the-Art Design and Technologies (2021)
Journal Article
Khowja, M. R., Abebe, R., Vakil, G., Walker, A., Patel, C., Gerada, C., …Cascella, G. L. (2021). Review on the Traditional and Integrated Passives: State-of-the-Art Design and Technologies. Energies, 15(1), Article 88. https://doi.org/10.3390/en15010088

With the increased necessity of a high power density and efficient system in aerospace and marine industries, integrated motor drives provide an excellent solution in the modern era. Therefore, a close structural and functional integration of passive... Read More about Review on the Traditional and Integrated Passives: State-of-the-Art Design and Technologies.

Microstructure formation in the powder HIPed hardfacing alloy Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) (2021)
Journal Article
Carrington, M. J., McCartney, D. G., Shipway, P. H., & Stewart, D. A. (2022). Microstructure formation in the powder HIPed hardfacing alloy Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%). Materials Characterization, 184, Article 111688. https://doi.org/10.1016/j.matchar.2021.111688

Tristelle 5183 (Fe-21%Cr-10%Ni-7%Nb-5%Si-2%C in wt%) is an alternative material to cobalt-based alloys for wear resistant hardfacing applications. In this work, gas atomised powder was consolidated by hot isostatic pressing (HIPing) at 1120 ± 10 oC w... Read More about Microstructure formation in the powder HIPed hardfacing alloy Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%).

Room to breathe: Using adaptive architecture to examine the relationship between alexithymia and interoception (2021)
Journal Article
Abdulhamid, H., Jäger, N., Schnädelbach, H., & Smith, A. D. (2022). Room to breathe: Using adaptive architecture to examine the relationship between alexithymia and interoception. Journal of Psychosomatic Research, 153, Article 110708. https://doi.org/10.1016/j.jpsychores.2021.110708

Objective: Individuals with alexithymia experience difficulties interpreting emotional states in self and others, which has been associated with interoceptive impairment. Current theories are primarily based on subjective and conscious measures of in... Read More about Room to breathe: Using adaptive architecture to examine the relationship between alexithymia and interoception.

Effectiveness of bed additives in abating agglomeration during biomass air/oxy combustion in a fluidised bed combustor (2021)
Journal Article
Chi, H., Pans, M. A., Sun, C., & Liu, H. (2022). Effectiveness of bed additives in abating agglomeration during biomass air/oxy combustion in a fluidised bed combustor. Renewable Energy, 185, 945-958. https://doi.org/10.1016/j.renene.2021.12.072

In this study, molochite (calcined kaolin) and dolomite with particle sizes (ca.1 mm) similar to those of the sand bed materials of industrial-scale fluidised beds, rather than powders which were normally used by previous studies, were investigated a... Read More about Effectiveness of bed additives in abating agglomeration during biomass air/oxy combustion in a fluidised bed combustor.

Vortex evolution in a rotating tank with an off-axis drain (2021)
Journal Article
Munro, R. J., & Foster, M. R. (2022). Vortex evolution in a rotating tank with an off-axis drain. Journal of Fluid Mechanics, 933, Article R2. https://doi.org/10.1017/jfm.2021.1098

Fluid entering the periphery of a steadily rotating cylindrical tank exits through an off-axis drain hole, located in the tank's base at the half-radius. Experiments show that, though a concentrated vortex forms over the drain, it soon advects around... Read More about Vortex evolution in a rotating tank with an off-axis drain.

A dual material removal mechanism for clearing of obstructed holes via electrical discharge machining (2021)
Journal Article
Castro-Palacios, M., Ahmed, S., Ahmed, N., Murray, J. W., Speidel, A., Duffin, J., …Clare, A. T. (2022). A dual material removal mechanism for clearing of obstructed holes via electrical discharge machining. Manufacturing Letters, 31, 10-14. https://doi.org/10.1016/j.mfglet.2021.12.003

Cooling hole blockages in gas turbine blades can occur during operation, detrimentally reducing performance and resulting in premature removal from service. Here, electrical discharge machining (EDM) is used to unblock fine holes, which have been obs... Read More about A dual material removal mechanism for clearing of obstructed holes via electrical discharge machining.

TIME to Change: Rethinking Humanitarian Energy Access (2021)
Journal Article
Robinson, B., Clifford, M., & Jewitt, S. (2022). TIME to Change: Rethinking Humanitarian Energy Access. Energy Research and Social Science, 86, Article 102453. https://doi.org/10.1016/j.erss.2021.102453

Achieving Sustainable Development Goal 7-universal access to affordable, reliable and modern energy services by 2030-represents a considerable challenge. Currently, 40% of the global population do not have access to sustainable energy sources, and in... Read More about TIME to Change: Rethinking Humanitarian Energy Access.

Measurement of the single crystal elasticity matrix of polycrystalline materials (2021)
Journal Article
Dryburgh, P., Li, W., Pieris, D., Fuentes-Domínguez, R., Patel, R., Smith, R. J., & Clark, M. (2022). Measurement of the single crystal elasticity matrix of polycrystalline materials. Acta Materialia, 225, Article 117551. https://doi.org/10.1016/j.actamat.2021.117551

Many engineering metals are polycrystalline, as such the elasticity, crystalline orientation and grain distribution are cardinal factors in determining the physical properties of the material. The grain distribution can be measured using a number of... Read More about Measurement of the single crystal elasticity matrix of polycrystalline materials.

Short-, medium-, and long-duration energy storage in a 100% renewable electricity grid: A UK case study (2021)
Journal Article
Cárdenas, B., Swinfen-Styles, L., Rouse, J., & Garvey, S. D. (2021). Short-, medium-, and long-duration energy storage in a 100% renewable electricity grid: A UK case study. Energies, 14(24), Article 8524. https://doi.org/10.3390/en14248524

Energy storage will be required over a wide range of discharge durations in future zero-emission grids, from milliseconds to months. No single technology is well suited for the complete range. Using 9 years of UK data, this paper explores how to comb... Read More about Short-, medium-, and long-duration energy storage in a 100% renewable electricity grid: A UK case study.

Fundamental formulation for anti-plane eigenstrain problems (2021)
Journal Article
Ma, L. (2022). Fundamental formulation for anti-plane eigenstrain problems. Mechanics of Materials, 165, Article 104188. https://doi.org/10.1016/j.mechmat.2021.104188

In this paper, the anti-plane eigenstrain problems are addressed in the framework of plane strain. A fundamental solution for an anti-plane eigenstrain nucleus located in an infinite plane is derived first. With this solution, the anti-plane eigenstr... Read More about Fundamental formulation for anti-plane eigenstrain problems.