All Outputs (160)

Experimental study of viscosity and thermal conductivity of water based Fe3O4 nanofluid with highly disaggregated particles (2022)
Journal Article
Liu, Z., Wang, X., Gao, H., & Yan, Y. (2022). Experimental study of viscosity and thermal conductivity of water based Fe3O4 nanofluid with highly disaggregated particles. Case Studies in Thermal Engineering, 35, Article 102160. https://doi.org/10.1016/j.csite.2022.102160

This work aims to experimentally study the viscosity and thermal conductivity of water based Fe3O4 nanofluid with highly disaggregated nanoparticles. The citric acid is modified on Fe3O4 nanoparticles with carboxyl groups, which enables particles to... Read More about Experimental study of viscosity and thermal conductivity of water based Fe3O4 nanofluid with highly disaggregated particles.

Experimental investigation on end winding thermal management with oil spray in electric vehicles (2022)
Journal Article
Wang, X., Li, B., Huang, K., Yan, Y., Stone, I., & Worrall, S. (2022). Experimental investigation on end winding thermal management with oil spray in electric vehicles. Case Studies in Thermal Engineering, 35, Article 102082. https://doi.org/10.1016/j.csite.2022.102082

To achieve a carbon-neutral sustainable future, the transportation sector is experiencing quick electrification, as more and more vehicles are driven by electric motors. Electric motors are designing more and more powerful and thus pose a great incre... Read More about Experimental investigation on end winding thermal management with oil spray in electric vehicles.

Dynamic behaviors of fuel droplets impacting on the wall surfaces with different wettability and temperatures (2022)
Journal Article
Guo, L., Chen, Y., Cai, N., Sun, W., Yan, Y., Wang, H., & Gao, Y. (2022). Dynamic behaviors of fuel droplets impacting on the wall surfaces with different wettability and temperatures. Applied Thermal Engineering, 212, Article 118536. https://doi.org/10.1016/j.applthermaleng.2022.118536

To improve the controllability of combustion and reduce the emissions of HC and CO of the newly developed combustion modes, such as the HCCI, PCCI and RCCI, the evaporation processes and morphological developments of diesel droplets impacting on the... Read More about Dynamic behaviors of fuel droplets impacting on the wall surfaces with different wettability and temperatures.

Effects of Intake Components and Stratification on the Particle and Gaseous Emissions of a Diesel Engine (2022)
Journal Article
Zhang, X., Sun, W., Guo, L., Zhang, H., Sun, Y., Yan, Y., & You, T. (2022). Effects of Intake Components and Stratification on the Particle and Gaseous Emissions of a Diesel Engine. ACS Omega, 7(12), 10001-10011. https://doi.org/10.1021/acsomega.1c05089

It is of great significance to improve the performance of diesel engines by adjusting the intake components and their distribution. In this work, various proportions of exhaust gas recirculation (EGR) gas and oxygen (O2) have been introduced to the i... Read More about Effects of Intake Components and Stratification on the Particle and Gaseous Emissions of a Diesel Engine.

Component-dependent thermal properties of molten salt eutectics for solar thermal energy storage: Experiments, molecular simulation and applications (2022)
Journal Article
Zhang, S., Li, Z., Wang, H., Tian, L., Jin, Y., Alston, M., & Yan, Y. (2022). Component-dependent thermal properties of molten salt eutectics for solar thermal energy storage: Experiments, molecular simulation and applications. Applied Thermal Engineering, 209, Article 118333. https://doi.org/10.1016/j.applthermaleng.2022.118333

Molten salts have been used in solar thermal energy storage due to their high energy storage density, low cost and excellent chemical stability. However, their application is limited by “bad days” such as cloudy days and winter because the weak conce... Read More about Component-dependent thermal properties of molten salt eutectics for solar thermal energy storage: Experiments, molecular simulation and applications.

Photoacoustic response optimization of gold nanorods in the near-infrared region (2022)
Journal Article
Sun, J.-P., Ren, Y.-T., Wei, K., He, M.-J., Gao, B.-H., & Qi, H. (2022). Photoacoustic response optimization of gold nanorods in the near-infrared region. Results in Physics, 34, Article 105209. https://doi.org/10.1016/j.rinp.2022.105209

Photoacoustic imaging (PAI) combines the advantage of optical and ultrasonic imaging, which has a high signal-to-noise ratio, and spatial resolution. To further improve the performance of PAI, gold nanorods can be utilized as exogenous contrast agent... Read More about Photoacoustic response optimization of gold nanorods in the near-infrared region.

Thermal performance of a phase change material-based heat sink in presence of nanoparticles and metal-foam to enhance cooling performance of electronics (2022)
Journal Article
Arshad, A., Jabbal, M., Faraji, H., Talebizadehsardari, P., Bashir, M. A., & Yan, Y. (2022). Thermal performance of a phase change material-based heat sink in presence of nanoparticles and metal-foam to enhance cooling performance of electronics. Journal of Energy Storage, 48, Article 103882. https://doi.org/10.1016/j.est.2021.103882

The present study explores the parametric investigation of a heat sink filled with composite of pure phase change material (PCM), nanocomposite phase change material (NCPCM), metal-foam (MF) by employing the numerical approach for effective passive t... Read More about Thermal performance of a phase change material-based heat sink in presence of nanoparticles and metal-foam to enhance cooling performance of electronics.

Molecular insights into the effect of anionic-nonionic and cationic surfactant mixtures on interfacial properties of oil-water interface (2022)
Journal Article
Zhou, W., Jiang, L., Liu, X., Hu, Y., & Yan, Y. (2022). Molecular insights into the effect of anionic-nonionic and cationic surfactant mixtures on interfacial properties of oil-water interface. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 637, Article 128259. https://doi.org/10.1016/j.colsurfa.2022.128259

The influence of surfactants is of great importance to the interfacial properties, which is related by the characteristics of molecular arrays at the interface of multicomponent and multiphase systems. Comparing with single type of surfactant, the mi... Read More about Molecular insights into the effect of anionic-nonionic and cationic surfactant mixtures on interfacial properties of oil-water interface.

A critical review on thermal management technologies for motors in electric cars (2021)
Journal Article
Wang, X., Li, B., Gerada, D., Huang, K., Stone, I., Worrall, S., & Yan, Y. (2022). A critical review on thermal management technologies for motors in electric cars. Applied Thermal Engineering, 201(Part A), Article 117758. https://doi.org/10.1016/j.applthermaleng.2021.117758

The development of electric cars has well been regarded as a major solution for tackling the challenges of carbon-neutrality faced by the modern communities. Electric motor is certainly the core and most important components of an electric car, and t... Read More about A critical review on thermal management technologies for motors in electric cars.

An experimental investigation of wide distillation fuel based on CTL on the combustion performance and emission characteristics from a CI engine (2021)
Journal Article
Sun, Y., Sun, W., Guo, L., Zhang, H., Yan, Y., Zeng, W., & Lin, S. (2022). An experimental investigation of wide distillation fuel based on CTL on the combustion performance and emission characteristics from a CI engine. Fuel, 310(Part B), Article 122262. https://doi.org/10.1016/j.fuel.2021.122262

Coal to liquid (CTL) has promising application prospects as an alternative diesel fuel, but the direct application of coal-based synthetic diesel with high cetane number (CN) in compression ignition (CI) engines also has problems. Therefore, the CTL... Read More about An experimental investigation of wide distillation fuel based on CTL on the combustion performance and emission characteristics from a CI engine.

Towards the thermal management of electronic devices: A parametric investigation of finned heat sink filled with PCM (2021)
Journal Article
Arshad, A., Ibrahim Alabdullatif, M., Jabbal, M., & Yan, Y. (2021). Towards the thermal management of electronic devices: A parametric investigation of finned heat sink filled with PCM. International Communications in Heat and Mass Transfer, 129, Article 105643. https://doi.org/10.1016/j.icheatmasstransfer.2021.105643

This study presents the parametric investigation of a phase change material (PCM) filled plate-fin heat sink, used for thermal management (TM) of electronic components. Two-dimensional (2D) unsteady numerical simulations were carried out using the fi... Read More about Towards the thermal management of electronic devices: A parametric investigation of finned heat sink filled with PCM.

Comparison of different fluid-thermal-electric multiphysics modeling approaches for thermoelectric generator systems (2021)
Journal Article
Luo, D., Wang, R., Yan, Y., Sun, Z., Zhou, W., & Ding, R. (2021). Comparison of different fluid-thermal-electric multiphysics modeling approaches for thermoelectric generator systems. Renewable Energy, 180, 1266-1277. https://doi.org/10.1016/j.renene.2021.09.033

This work proposes a novel fluid-thermal-electric multiphysics numerical model to predict the performance of thermoelectric generator systems applied to fluid waste heat recovery, with the consideration of multiphysics coupling effects of fluid, ther... Read More about Comparison of different fluid-thermal-electric multiphysics modeling approaches for thermoelectric generator systems.

Efficient radiative cooling coating with biomimetic human skin wrinkle structure (2021)
Journal Article
Cheng, Z., Han, H., Wang, F., Yan, Y., Shi, X., Liang, H., …Shuai, Y. (2021). Efficient radiative cooling coating with biomimetic human skin wrinkle structure. Nano Energy, 89, Part A, Article 106377. https://doi.org/10.1016/j.nanoen.2021.106377

Daytime radiative cooling is an energy-free pathway to achieve cooling performance. Current radiative cooling materials with periodic photonic structures are facing a huge challenge in terms of scale expansion owing to complex preparation technology... Read More about Efficient radiative cooling coating with biomimetic human skin wrinkle structure.

Numerical investigation on improving the heat storage and transfer performance of ceramic /D-mannitol composite phase change materials by bionic graded pores and nanoparticle additives (2021)
Journal Article
Feng, D., Nan, J., Feng, Y., Zhang, X., & Yan, Y. (2021). Numerical investigation on improving the heat storage and transfer performance of ceramic /D-mannitol composite phase change materials by bionic graded pores and nanoparticle additives. International Journal of Heat and Mass Transfer, 179, Article 121748. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121748

To speed up the thermal response rate of the latent heat storage system, this research draws on the ideas of bionics and proposes two methods to enhance the performance of heat storage and heat transfer during phase change process. First, a biomimeti... Read More about Numerical investigation on improving the heat storage and transfer performance of ceramic /D-mannitol composite phase change materials by bionic graded pores and nanoparticle additives.

Depression of melting point and latent heat of molten salts as inorganic phase change material: size effect and mechanism (2021)
Journal Article
Zhang, S., Jin, Y., & Yan, Y. (2022). Depression of melting point and latent heat of molten salts as inorganic phase change material: size effect and mechanism. Journal of Molecular Liquids, 346, Article 117058. https://doi.org/10.1016/j.molliq.2021.117058

The depression of melting point and latent heat is a common phenomenon for nanoporous shape-stabilised phase change materials (ss-PCMs), however, the underlying mechanism is not well understood, especially from the microscopic perspective. As PCMs ar... Read More about Depression of melting point and latent heat of molten salts as inorganic phase change material: size effect and mechanism.

Thermal Effect on Deformation of Nanofluid-Encapsulated Double Emulsion Droplets Flowing in a Constricted Microchannel (2021)
Journal Article
Rena, Y., Huang, Y., Xie, C., Yan, Y., Wang, J., & Yamaguchi, T. (2021). Thermal Effect on Deformation of Nanofluid-Encapsulated Double Emulsion Droplets Flowing in a Constricted Microchannel. Heat Transfer Engineering, 43(13), 1135-1148. https://doi.org/10.1080/01457632.2021.1943853

Double emulsions have been intensively used as a template to form core/shell structured microcapsules encapsulating and releasing a substance of interest in a controllable way for wide spectrum of chemical and biological applications. Herein a numeri... Read More about Thermal Effect on Deformation of Nanofluid-Encapsulated Double Emulsion Droplets Flowing in a Constricted Microchannel.

Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network (2021)
Journal Article
Shi, L., Zhang, S., Arshad, A., Hu, Y., He, Y., & Yan, Y. (2021). Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network. Renewable and Sustainable Energy Reviews, 149, Article 111341. https://doi.org/10.1016/j.rser.2021.111341

Nanostructured magnetic suspensions have superior thermophysical properties, which have attracted widespread attention owing to their industrial applications for heat transfer enhancement and thermal management. However, experimental measurements of... Read More about Thermo-physical properties prediction of carbon-based magnetic nanofluids based on an artificial neural network.

Recent advances of nanofluids in micro/nano scale energy transportation (2021)
Journal Article
Liu, C., Qiao, Y., Du, P., Zhang, J., Zhao, J., Liu, C., …Yan, Y. (2021). Recent advances of nanofluids in micro/nano scale energy transportation. Renewable and Sustainable Energy Reviews, 149, Article 111346. https://doi.org/10.1016/j.rser.2021.111346

As the continuing integration and size deflation of component dimensions in electronic circuits and increase in the number of transistors in modern microprocessor chips, especially for heat dissipation of micro/nano scale devise, traditionally used s... Read More about Recent advances of nanofluids in micro/nano scale energy transportation.

Experimental and Numerical Heat Transfer Investigation of Impingement Jet Nozzle Position in Concave Double-Wall Cooling Structures (2021)
Journal Article
Wright, E., Ahmed, A., Yan, Y., Maltson, J., & Arisso Lopez, L. A. (2022). Experimental and Numerical Heat Transfer Investigation of Impingement Jet Nozzle Position in Concave Double-Wall Cooling Structures. Heat Transfer Engineering, 43(13), 1108-1118. https://doi.org/10.1080/01457632.2021.1943842

In this paper, experimental and numerical study has been carried out to investigate impingement cooling with a row of five circular jets, varied between target positions on a realistic leading edge region of gas turbine blade geometry. Experimental d... Read More about Experimental and Numerical Heat Transfer Investigation of Impingement Jet Nozzle Position in Concave Double-Wall Cooling Structures.

Comparative assessment of n-butanol addition in CTL on performance and exhaust emissions of a CI engine (2021)
Journal Article
Sun, W., Sun, Y., Guo, L., Zhang, H., Yan, Y., Zeng, W., & Lin, S. (2021). Comparative assessment of n-butanol addition in CTL on performance and exhaust emissions of a CI engine. Fuel, 303, Article 121223. https://doi.org/10.1016/j.fuel.2021.121223

Coal to liquid (CTL) is a diesel alternative fuel based on Fischer-Tropsch (FT) process, which has shown promising application value. Besides, as an oxygenated biofuel with high oxygen content and volatility, n-butanol can be blended with hydrocarbon... Read More about Comparative assessment of n-butanol addition in CTL on performance and exhaust emissions of a CI engine.