Skip to main content

Research Repository

Advanced Search

All Outputs (95)

Fourier optics modelling of coherence scanning interferometers (2021)
Presentation / Conference Contribution
de Groot, P. J., Colonna de Lega, X., Su, R., Coupland, J., & Leach, R. K. (2021). Fourier optics modelling of coherence scanning interferometers. In SPIE OPTICAL ENGINEERING + APPLICATIONS. https://doi.org/10.1117/12.2595668

We propose an instrument model for coherence scanning interferometry using familiar Fourier optics methods, the spectrum of plane waves, and the assumption that the light source spectral bandwidth is the dominant factor in determining fringe contrast... Read More about Fourier optics modelling of coherence scanning interferometers.

Efficient empirical determination of maximum permissible error in coordinate metrology (2021)
Journal Article
Thompson, A., Southon, N., Fern, F., Stupfler, G., & Leach, R. (2021). Efficient empirical determination of maximum permissible error in coordinate metrology. Measurement Science and Technology, 32(10), Article 105013. https://doi.org/10.1088/1361-6501/ac0c49

Maximum permissible errors (MPEs) are an important measurement system specification and form the basis of periodic verification of a measurement system's performance. However, there is no standard methodology for determining MPEs, so when they are no... Read More about Efficient empirical determination of maximum permissible error in coordinate metrology.

Evaluating and propagating uncertainty in digital fringe projection systems (2021)
Presentation / Conference Contribution
Gayton, G., Isa, M., Su, R., & Leach, R. (2021). Evaluating and propagating uncertainty in digital fringe projection systems. Proceedings of SPIE, 11782, https://doi.org/10.1117/12.2592426

Fringe projection is a measurement technique able to produce high-density data measurements of Lambertian surfaces using a camera and projector. Evaluating the uncertainty of a fringe projection system is challenging because of the highdensity and th... Read More about Evaluating and propagating uncertainty in digital fringe projection systems.

Physics-based virtual coherence scanning interferometer for surface measurement (2021)
Journal Article
Su, R., & Leach, R. (2021). Physics-based virtual coherence scanning interferometer for surface measurement. Light: Science and Applications, 2(2), 120-135. https://doi.org/10.37188/lam.2021.009

Virtual instruments provide task-specific uncertainty evaluation in surface and dimensional metrology. We demonstrate the first virtual coherence scanning interferometer that can accurately predict the results from measurements of surfaces with compl... Read More about Physics-based virtual coherence scanning interferometer for surface measurement.

Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample (2021)
Journal Article
Shabbir, S., Garvey, S. D., Dakka, S. M., Rothwell, B. C., Su, R., Leach, R., & Weston, N. (2022). Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236(1), 123-143. https://doi.org/10.1177/13506501211005876

To investigate the tribological interaction and wear mechanisms of polytetrafluoroethylene-lined radial lip oil seals in service, a sleeve, seal and lubricant sample taken off a rotating rig are studied. The test was terminated at 72 h, after severe... Read More about Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample.

Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts (2021)
Journal Article
Mabwa, D., Kubiena, T., Parnell, H., Su, R., Furniss, D., Tang, Z., …Seddon, A. B. (2021). Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts. RSC Advances, 11(15), 8682-8693. https://doi.org/10.1039/d0ra00353k

In vivo cancer detection based on the mid-infrared molecular fingerprint of tissue is promising for the fast diagnosis and treatment of suspected cancer patients. Few materials are mid-infrared transmissive, even fewer, which can be converted into fu... Read More about Evaluating the cytotoxicity of Ge–Sb–Se chalcogenide glass optical fibres on 3T3 mouse fibroblasts.

Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps (2021)
Journal Article
Shaheen, A., Sims-Waterhouse, D., Bointon, P., Takushima, S., Piano, S., & Leach, R. K. (2021). Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps. Measurement Science and Technology, 32(4), Article 045006. https://doi.org/10.1088/1361-6501/abd445

Multi-view fringe projection systems can be effective solutions to address the limitations imposed by the limited field of view, line-of-sight issues and occlusions when measuring the geometry of
complex objects, associated with single camera-projec... Read More about Characterisation of a multi-view fringe projection system based on the stereo matching of rectified phase maps.

Statistical point cloud model to investigate measurement uncertainty in coordinate metrology (2021)
Journal Article
Senin, N., Catalucci, S., Moretti, M., & Leach, R. (2021). Statistical point cloud model to investigate measurement uncertainty in coordinate metrology. Precision Engineering, 70, 44-62. https://doi.org/10.1016/j.precisioneng.2021.01.008

In this work an approach to investigate measurement uncertainty in coordinate metrology is presented, based on fitting Gaussian random fields to high-density point clouds produced by measurement repeats. The fitted field delivers a depiction of the s... Read More about Statistical point cloud model to investigate measurement uncertainty in coordinate metrology.

Laser triangulation (2020)
Book Chapter
Isa, M. A., Piano, S., & Leach, R. Laser triangulation. In R. Leach (Ed.), Advances in Optical Form and Coordinate Metrology. IOP Publishing. https://doi.org/10.1088/978-0-7503-2524-0ch3

This chapter gives a summary of laser triangulation as a measurement technique and outlines recent applications and challenges.

Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism (2020)
Journal Article
Karim, S., Piano, S., Branson, D., Santoso, T., Leach, R., & Tolley, M. (2022). Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism. International Journal of Control, 95(4), 867-885. https://doi.org/10.1080/00207179.2020.1827297

This paper presents a real-time position control solution for the targets used in the high-repetition rate laser operations of large-scale high-power laser facilities. The design of the control system is based on an Abbe-compliant, in-process positio... Read More about Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism.

Mathematical approach to the validation of form removal surface texture software (2020)
Journal Article
Todhunter, L., Leach, R., & Blateyron, F. (2020). Mathematical approach to the validation of form removal surface texture software. Surface Topography: Metrology and Properties, 8(4), Article 045019. https://doi.org/10.1088/2051-672x/abc737

A new approach to the validation of surface texture form removal methods is introduced. A linear algebra technique is presented that obtains total least squares (TLS) model fits for a continuous mathematical surface definition. This model is applicab... Read More about Mathematical approach to the validation of form removal surface texture software.

Mathematical approach to the validation of surface texture filtration software (2020)
Journal Article
Todhunter, L., Leach, R., & Blateyron, F. (2020). Mathematical approach to the validation of surface texture filtration software. Surface Topography: Metrology and Properties, 8(4), Article 045017. https://doi.org/10.1088/2051-672X/abc0fb

A novel method for the validation of surface texture filtration software is introduced. Mathematically traceable reference pairs for linear Gaussian filtration are developed, utilising Fourier series surface definitions in conjunction with the freque... Read More about Mathematical approach to the validation of surface texture filtration software.

Optimisation of camera positions for optical coordinate measurement based on visible point analysis (2020)
Journal Article
Zhang, H., Eastwood, J., Isa, M., Sims-Waterhouse, D., Leach, R., & Piano, S. (2021). Optimisation of camera positions for optical coordinate measurement based on visible point analysis. Precision Engineering, 67, 178-188. https://doi.org/10.1016/j.precisioneng.2020.09.016

In optical coordinate measurement using cameras, the number of images, and positions and orientations of the cameras, are critical to object accessibility and the accuracy of a measurement. In this paper, we propose a technique to optimise the number... Read More about Optimisation of camera positions for optical coordinate measurement based on visible point analysis.

Surface-process correlation for an ink-jet printed transparent fluoroplastic (2020)
Journal Article
Gomez, C., Campanelli, C., Su, R., & Leach, R. (2020). Surface-process correlation for an ink-jet printed transparent fluoroplastic. Surface Topography: Metrology and Properties, 8(3), Article 034002. https://doi.org/10.1088/2051-672X/abac1c

Ink-jet printing is one of the key technologies in the field of defined polymer deposition. There is currently a lack of knowledge regarding how some fluoropolymers, in this case THV 221, can be ink-jet printed. A quantitative analysis of the micro-s... Read More about Surface-process correlation for an ink-jet printed transparent fluoroplastic.

Review of the influence of noise in X-ray computed tomography measurement uncertainty (2020)
Journal Article
Sánchez, Á. R., Thompson, A., Körner, L., Brierley, N., & Leach, R. (2020). Review of the influence of noise in X-ray computed tomography measurement uncertainty. Precision Engineering, 66, 382-391. https://doi.org/10.1016/j.precisioneng.2020.08.004

Different aspects of noise in X-ray computed tomography (XCT) for industrial purposes are examined. An overview of the most common noise metrics is given, together with a description of XCT noise influence quantities. We address the current state of... Read More about Review of the influence of noise in X-ray computed tomography measurement uncertainty.

Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process (2020)
Journal Article
Palma, V., Goodall, R., Thompson, A., Ruocco, C., Renda, S., Leach, R., & Martino, M. (2021). Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process. International Journal of Hydrogen Energy, 46(22), 12158-12168. https://doi.org/10.1016/j.ijhydene.2020.04.065

A study on the use of chemical conversion coating as a preparative technique for foam-based structured catalysts, in the water gas shift reaction, is presented. The results showed a significant correlation between the textural properties of the struc... Read More about Ceria-coated replicated aluminium sponges as catalysts for the CO-water gas shift process.

Volumetric error modelling of a stereo vision system for error correction in photogrammetric three-dimensional coordinate metrology (2020)
Journal Article
Isa, M. A., Sims-Waterhouse, D., Piano, S., & Leach, R. (2020). Volumetric error modelling of a stereo vision system for error correction in photogrammetric three-dimensional coordinate metrology. Precision Engineering, 64, 188-199. https://doi.org/10.1016/j.precisioneng.2020.04.010

Optical three-dimensional coordinate measurement using stereo vision has systematic errors that affect measurement quality. This paper presents a scheme for measuring, modelling and correcting these errors. The position and orientation of a linear st... Read More about Volumetric error modelling of a stereo vision system for error correction in photogrammetric three-dimensional coordinate metrology.

Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism (2020)
Journal Article
Leach, R., Branson, D., Karim, S., Tolley, M., Piano, S., & Santoso, T. (2020). Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism. International Journal of Control, 95(4), 867-885. https://doi.org/10.1080/00207179.2020.1827297

This paper presents a real-time position control solution for the targets used in the high-repetition rate laser operations of high-power laser facilities. The control system is designed based on an Abbe-compliant, in-process position measurement sys... Read More about Real-time target alignment system for high-power high-repetition rate laser operations using a five degree-of-freedom hybrid mechanism.