Skip to main content

Research Repository

Advanced Search

All Outputs (95)

Error modelling and validation of a high-precision five degree of freedom hybrid mechanism for high-power high-repetition rate laser operations (2018)
Journal Article
Karim, S., Piano, S., Leach, R. K., & Tolley, M. (2018). Error modelling and validation of a high-precision five degree of freedom hybrid mechanism for high-power high-repetition rate laser operations. Precision Engineering, 54, 182-197. https://doi.org/10.1016/j.precisioneng.2018.04.018

The accuracy, repeatability and speed requirements of high-power laser operations demand the employment of five degree of freedom motion control solutions that are capable of positioning and orientating the target with respect to the laser(s)-target... Read More about Error modelling and validation of a high-precision five degree of freedom hybrid mechanism for high-power high-repetition rate laser operations.

Photogrammetric coordinate metrology (2018)
Presentation / Conference Contribution
Sims-Waterhouse, D., Piano, S., & Leach, R. (2018, June). Photogrammetric coordinate metrology. Paper presented at euspen 18th International Conference & Exhibition

Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement (2018)
Journal Article
Leach, R., Sims-Waterhouse, D., Medeossi, F., Savio, E., Carmignato, S., & Su, R. (2018). Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement. CIRP Annals - Manufacturing Technology, 67(1), 599-602. https://doi.org/10.1016/j.cirp.2018.04.043

Multisensor data fusion is an approach to enlarge the potential applicability of measuring techniques and improve accuracy, taking advantage of the strengths of different techniques. In this work, we present a new method for the fusion of photogramme... Read More about Fusion of photogrammetry and coherence scanning interferometry data for all-optical coordinate measurement.

Development of mathematically-defined surfaces (2017)
Presentation / Conference Contribution
Todhunter, L. D., Leach, R., Lawes, S., Harris, P., & Blateyron, F. (2017). Development of mathematically-defined surfaces.

New software has been developed that enables the creation of areal surface topography representations. The goal of this software package is to utilise the mathematically-defined surface representations in the development of surface texture parameter... Read More about Development of mathematically-defined surfaces.

True-color 3D surface metrology for additive manufacturing using interference microscopy (2017)
Presentation / Conference Contribution
DiSciacca, J., Gomez, C., Thompson, A., Lawes, S., Leach, R., Colonna de Lega, X., & de Groot, P. (2017). True-color 3D surface metrology for additive manufacturing using interference microscopy.

Coherence scanning interferometry (CSI) is widely used for surface topography characterisation. With the ability to measure both rough surfaces with the high slopes and optical finishes, CSI has made contibutions in fields from industrial machining t... Read More about True-color 3D surface metrology for additive manufacturing using interference microscopy.

Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing (2017)
Presentation / Conference Contribution
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. (2017). Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing.

The mechanical performance of additively manufactured (AM) components remains an issue, limiting the implementation of AM technologies. In this work, a new method is presented, to examine the evolution of defects in an Inconel 718 two-bar test specim... Read More about Defect evolution in laser powder bed fusion additive manufactured components during thermo-mechanical testing.

Staged thermomechanical testing of nickel superalloys produced by selective laser melting (2017)
Journal Article
Xu, Z., Hyde, C. J., Thompson, A., Leach, R. K., Maskery, I., Tuck, C., & Clare, A. T. (2017). Staged thermomechanical testing of nickel superalloys produced by selective laser melting. Materials and Design, 133, 520-527. https://doi.org/10.1016/j.matdes.2017.08.009

The creep performance of additively manufactured components remains an issue before additive manufacturing can be put fully implemented. In this study, Inconel 718 two-bar specimens are produced by selective laser melting and subjected to a ‘staged’... Read More about Staged thermomechanical testing of nickel superalloys produced by selective laser melting.

Industrial survey of ISO surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R., Lawes, S., & Blateyron, F. (2017). Industrial survey of ISO surface texture parameters. CIRP Journal of Manufacturing Science and Technology, 19, https://doi.org/10.1016/j.cirpj.2017.06.001

Results of an international survey are presented, detailing the use of surface texture parameters in industry. The survey received 179 responses from a total of 34 countries, revealing the use of a variety of parameters from ISO 4287, ISO 12085, ISO... Read More about Industrial survey of ISO surface texture parameters.

Results of an industrial survey on the use of surface texture parameters (2017)
Presentation / Conference Contribution
Todhunter, L. D., Leach, R., & Lawes, S. (2017). Results of an industrial survey on the use of surface texture parameters.

In 1999, CIRP conducted an industrial survey of the use of surface texture parameters [1]. In the seventeen years since, much has changed, with the most important advancement being the introduction of areal surface texture parameters as described in... Read More about Results of an industrial survey on the use of surface texture parameters.

Design of mechanically-optimised lattice structures for vibration isolation (2017)
Presentation / Conference Contribution
Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., & Leach, R. K. (2017). Design of mechanically-optimised lattice structures for vibration isolation.

In this study, we investigate the use of additively manufactured strut-based lattice structures to enhance the mechanical vibration isolation properties of a structure. Three lattice designs, inspired by the common strut-based lattice structures, are... Read More about Design of mechanically-optimised lattice structures for vibration isolation.

An industrial survey on the use of surface texture parameters (2017)
Presentation / Conference Contribution
Todhunter, L. D., Leach, R., & Lawes, S. D. (2017). An industrial survey on the use of surface texture parameters.

In 1999, CIRP conducted an industrial survey of the use of surface texture parameters [1]. In the seventeen years since, much has changed, with the most important advancement being the introduction of areal surface texture parameters as described in... Read More about An industrial survey on the use of surface texture parameters.

Coherence scanning interferometry for additive manufacture (2017)
Presentation / Conference Contribution
Gomez, C., Thompson, A., DiSciacca, J., Lawes, S., & Leach, R. (2017). Coherence scanning interferometry for additive manufacture.

Additive manufacture (AM) of metal components is a rapidly maturing technology; but given the large number of interrelated process parameters, it remains difficult to control to high precision. It has been observed that processing conditions may be a... Read More about Coherence scanning interferometry for additive manufacture.

Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability (2017)
Presentation / Conference Contribution
Alburayt, A., Syam, W. P., & Leach, R. (2017). Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability.

Measurement noise is one of the ISO-proposed metrological characteristics of areal surface texture instruments [1, 2, 3, 4]. Measurement noise includes all of the unwanted contributions to the output signals when the instrument is used in its normal... Read More about Detecting the signature of motion stage non-linearity for focus variation microscopy using measurement noise and surface topography repeatability.

X-ray computed tomography and additive manufacturing in medicine: a review (2017)
Journal Article
Thompson, A., McNally, D., Maskery, I., & Leach, R. K. (in press). X-ray computed tomography and additive manufacturing in medicine: a review. International Journal of Metrology and Quality Engineering, 8, Article 17. https://doi.org/10.1051/ijmqe/2017015

The use of X-ray computed tomography (XCT) with additive manufacture (AM) within a medical context is examined in this review. The seven AM process families and various XCT scanning techniques are explained in brief, and the use of these technologies... Read More about X-ray computed tomography and additive manufacturing in medicine: a review.

An analysis of type F2 software measurement standards for profile surface texture parameters (2017)
Journal Article
Todhunter, L. D., Leach, R. K., Lawes, S., & Blateyron, F. (2017). An analysis of type F2 software measurement standards for profile surface texture parameters. Measurement Science and Technology, 28(6), Article 065017. https://doi.org/10.1088/1361-6501/aa6924

This paper reports on an in-depth analysis of ISO 5436 part 2 type F2 reference software for the calculation of profile surface texture parameters that has been performed on the input, implementation and output results of the reference software devel... Read More about An analysis of type F2 software measurement standards for profile surface texture parameters.