All Outputs (53)

Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator (2019)
Journal Article
He, Y.-L., Xu, M.-X., Xiong, J., Sun, Y.-X., Wang, X.-L., Gerada, D., & Vakil, G. (2019). Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator. IEEE Access, 7, 100813-100823. https://doi.org/10.1109/access.2019.2929868

This paper presents a comprehensive study on the variation laws of electromagnetic torque (EMT) under static air-gap eccentricity (SAGE) conditions in synchronous generators. Different from other studies, this paper focuses on not only the impact of... Read More about Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator.

Comparative study on two modular spoke-type PM machines for in-wheel traction applications (2019)
Journal Article
Zhang, H., Hua, W., Gerada, D., Gerada, C., Li, Y., & Zhang, G. (2019). Comparative study on two modular spoke-type PM machines for in-wheel traction applications. IEEE Transactions on Energy Conversion, 34(4), 2137-2147. https://doi.org/10.1109/tec.2019.2927872

This paper focuses on the comparative analysis of modular spoke-type permanent magnet machines with two magnetization modes, which are referred to as M-I and M-II types. The analytical models of the proposed machines are built based on the simple mag... Read More about Comparative study on two modular spoke-type PM machines for in-wheel traction applications.

Challenges of the optimization of a high-speed induction machine for naval applications (2019)
Journal Article
Buticchi, G., Gerada, D., Alberti, L., Galea, M., Wheeler, P., Bozhko, S., …Gerada, C. (2019). Challenges of the optimization of a high-speed induction machine for naval applications. Energies, 12(12), Article 2431. https://doi.org/10.3390/en12122431

In several industrial sectors, induction machines are being replaced with permanent magnet based alternatives, owing to the potential for higher power density and efficiency. However, high-speed applications feature a wide flux-weakening region, wher... Read More about Challenges of the optimization of a high-speed induction machine for naval applications.

Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines (2019)
Journal Article
Zeng, Z., Shen, Y., Lu, Q., Gerada, D., Wu, B., Huang, X., & Gerada, C. (2019). Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines. IEEE Transactions on Magnetics, 55(6), 1-7. https://doi.org/10.1109/tmag.2019.2908250

By developing a simple permeance-magnetomotive force (MMF) model of switched-flux permanent magnet (SFPM) machines, the air-gap flux density produced by both PMs and armature current can be derived, in which harmonics with the same order and rotation... Read More about Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines.

Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure (2019)
Journal Article
Liu, X., Gerada, D., Xu, Z., Corfield, M., Gerada, C., & Yu, H. (2020). Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure. IEEE Transactions on Industrial Electronics, 67(4), 2667-2677. https://doi.org/10.1109/tie.2019.2910031

Litz wires are employed in high-frequency electrical machines due to their advantages of reducing the ac losses, including minimizing the skin effect and the proximity effect. In order to improve the reliability of such machines, and enable accurate... Read More about Effective Thermal Conductivity Calculation and Measurement of Litz Wire based on the Porous Metal Materials Structure.

Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings (2019)
Journal Article
Zhang, F., Gerada, D., Xu, Z., Zhang, X., Tighe, C., Zhang, H., & Gerada, C. (2020). Back-Iron Extension Thermal Benefits for Electrical Machines With Concentrated Windings. IEEE Transactions on Industrial Electronics, 67(3), 1728-1738. https://doi.org/10.1109/tie.2019.2903758

The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines (2019)
Journal Article
Zhang, H., Hua, W., Hu, M., Gerada, D., & Gerada, C. (2019). The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines. IEEE Transactions on Magnetics, 55(7), Article 8104205. https://doi.org/10.1109/tmag.2018.2886686

The main purpose of this paper is to investigate the influence of winding location on back electromotive force (EMF) and armature inductance in flux-switching permanent-magnet (FSPM) machines. To obtain an analytical solution, a double-stator-pitch m... Read More about The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines.

Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft (2018)
Presentation / Conference Contribution
Li, Y., Zhang, Z., Gerada, D., & Gerada, C. (2018). Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft. In 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) (1-6). https://doi.org/10.1109/ESARS-ITEC.2018.8607694

The generation performance of the switched reluctance machine (SRM)-based starter/generator (S/G) and the doubly salient electromagnetic machine (DSEM)-based S/G is analyzed and compared in this paper. The topologies, operation principles of the doub... Read More about Performance Comparison of Doubly Salient Reluctance Generators for High-Voltage DC Power System of More Electric Aircraft.

Holistic electrical machine optimization for system integration (2017)
Presentation / Conference Contribution
Gerada, D., Golovanov, D., Xu, Z., Papini, L., Degano, M., Zhang, H., & Gerada, C. (2017). Holistic electrical machine optimization for system integration. In 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia) (980-985). https://doi.org/10.1109/IFEEC.2017.7992174

The power density of electrical machines required for transport applications has become a critical aspect and target of optimization. This paper looks at the development aspects of a multi-domain tool to aid for system-level optimization of electrica... Read More about Holistic electrical machine optimization for system integration.

Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system (2017)
Journal Article
Guo, Q., Zhang, C., Li, L., Gerada, D., Zhang, J., & Wang, M. (2017). Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system. Applied Energy, 204, https://doi.org/10.1016/j.apenergy.2017.05.023

As a main driving force of electric vehicles (EVs), the losses of in-wheel permanent-magnet synchronous motor (PMSM) direct drive system can seriously affect the energy consumption of EVs. This paper proposes a loss optimization control strategy for... Read More about Design and implementation of a loss optimization control for electric vehicle in-wheel permanent-magnet synchronous motor direct drive system.

A topology selection consideration of electrical machines for traction applications: towards the FreedomCar 2020 targets (2015)
Presentation / Conference Contribution
Walker, A., Galea, M., Gerada, C., Mebarki, A., & Gerada, D. (2015). A topology selection consideration of electrical machines for traction applications: towards the FreedomCar 2020 targets. . https://doi.org/10.1109/EVER.2015.7112923

This paper details a qualitative comparison between different types of electrical machine for hybrid electric vehicle traction applications. Targets set by the US Department of Energy for the year 2020 are used as goals. Several types of machine for... Read More about A topology selection consideration of electrical machines for traction applications: towards the FreedomCar 2020 targets.

Design considerations for high performance traction machines: Aiming for the FreedomCar 2020 targets (2015)
Presentation / Conference Contribution
Walker, A., Galea, M., Gerada, C., Mebarki, A., & Gerada, D. (2015). Design considerations for high performance traction machines: Aiming for the FreedomCar 2020 targets. . https://doi.org/10.1109/ESARS.2015.7101451

This paper presents considerations for the design of high performance, interior permanent magnet machines for traction applications. These machines will be designed to reach the FreedomCar 2020 targets set by the US Department of Energy for the year... Read More about Design considerations for high performance traction machines: Aiming for the FreedomCar 2020 targets.

High-speed electrical machines: technologies, trends and developments (2013)
Journal Article
Gerada, D., Mebarki, A., Brown, N., Gerada, C., Cavagnino, A., & Boglietti, A. (2014). High-speed electrical machines: technologies, trends and developments. IEEE Transactions on Industrial Electronics, 61(6), https://doi.org/10.1109/TIE.2013.2286777

This paper reviews the current technologies used in high speed electrical machines, through an extensive survey of different topologies developed and built in industry as well as in academia for several applications. Developments in materials and com... Read More about High-speed electrical machines: technologies, trends and developments.