All Outputs (15)

An Analytical Subdomain Model for Dual-Rotor Permanent Magnet Motor With Halbach Array (2019)
Journal Article
Golovanov, D., & Gerada, C. (2019). An Analytical Subdomain Model for Dual-Rotor Permanent Magnet Motor With Halbach Array. IEEE Transactions on Magnetics, 55(12), Article 8205216. https://doi.org/10.1109/tmag.2019.2941699

© 1965-2012 IEEE. This article describes the development of an exact analytical model for predicting magnetic field distribution within active parts of a dual-rotor (DR) permanent magnet (PM) synchronous machine with a Halbach array. The model is bas... Read More about An Analytical Subdomain Model for Dual-Rotor Permanent Magnet Motor With Halbach Array.

High-Speed Permanent Magnet Synchronous Motor Iron Loss Calculation Method Considering Multiphysics Factors (2019)
Journal Article
Liu, G., Liu, M., Zhang, Y., Wang, H., & Gerada, C. (2020). High-Speed Permanent Magnet Synchronous Motor Iron Loss Calculation Method Considering Multiphysics Factors. IEEE Transactions on Industrial Electronics, 67(7), 5360-5368. https://doi.org/10.1109/tie.2019.2934075

Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension (2019)
Journal Article
Yu, L., Zhang, Z., Bian, Z., Gerada, D., & Gerada, C. (2019). Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension. IEEE Transactions on Industrial Electronics, 67(6), 1-10. https://doi.org/10.1109/tie.2019.2931253

In this paper, a dual-pulse mode control of a high-speed doubly salient electromagnetic machine (DSEM) for efficiency improvement over a wide speed range is investigated and implemented. The dual-pulse mode control method and operation principle are... Read More about Dual-Pulse Mode Control of a High-Speed Doubly Salient Electromagnetic Machine for Loss Reduction and Speed Range Extension.

Internal Current Return Path for Ground Leakage Current Mitigation in Current Source Inverters (2019)
Journal Article
Lorenzani, E., Migliazza, G., Immovilli, F., Gerada, C., Zhang, H., & Buticchi, G. (2019). Internal Current Return Path for Ground Leakage Current Mitigation in Current Source Inverters. IEEE Access, 7, 96540-96548. https://doi.org/10.1109/access.2019.2929062

This paper analyzes in detail the effect of a simple solution for ground leakage current mitigation applicable to transformerless three-phase current source inverter (CSI). The circuit modification solution is assessed for both traditional CSI topolo... Read More about Internal Current Return Path for Ground Leakage Current Mitigation in Current Source Inverters.

Comparative study on two modular spoke-type PM machines for in-wheel traction applications (2019)
Journal Article
Zhang, H., Hua, W., Gerada, D., Gerada, C., Li, Y., & Zhang, G. (2019). Comparative study on two modular spoke-type PM machines for in-wheel traction applications. IEEE Transactions on Energy Conversion, 34(4), 2137-2147. https://doi.org/10.1109/tec.2019.2927872

This paper focuses on the comparative analysis of modular spoke-type permanent magnet machines with two magnetization modes, which are referred to as M-I and M-II types. The analytical models of the proposed machines are built based on the simple mag... Read More about Comparative study on two modular spoke-type PM machines for in-wheel traction applications.

A Novel Concept of Ribless Synchronous Reluctance Motor for Enhanced Torque Capability (2019)
Journal Article
Bao, Y., Degano, M., Wang, S., Chuan, L., Xu, Z., Zhang, H., & Gerada, C. (2020). A Novel Concept of Ribless Synchronous Reluctance Motor for Enhanced Torque Capability. IEEE Transactions on Industrial Electronics, 67(4), 2553-2563. https://doi.org/10.1109/tie.2019.2914616

The rotor structure of synchronous reluctance machines (SynRel) is conventionally retained mechanically by iron ribs. In this paper a novel structure for high speed synchronous reluctance rotor is presented. The novelty of this work is the proof of a... Read More about A Novel Concept of Ribless Synchronous Reluctance Motor for Enhanced Torque Capability.

Control Strategy for Five-Phase Dual-Stator Winding Induction Starter/Generator System (2019)
Journal Article
Liu, H., Bu, F., Huang, W., Liu, L., Hu, Y., Degano, M., & Gerada, C. (2020). Control Strategy for Five-Phase Dual-Stator Winding Induction Starter/Generator System. IEEE Transactions on Industrial Electronics, 67(4), 2607-2617. https://doi.org/10.1109/TIE.2019.2912767

This paper presents an integrated control strategy for a starter/generator (S/G) system based on five-phase dual-stator winding induction machine (FPDWIM). The FPDWIM has a cage-type rotor and two sets of stator windings. One is a five-phase control... Read More about Control Strategy for Five-Phase Dual-Stator Winding Induction Starter/Generator System.

Coupling calculation and analysis of three-dimensional temperature and fluid field for high-power high-speed permanent magnet machine (2019)
Journal Article
Wang, T., Zhang, Y., Wen, F., Gerada, C., Liu, G., Rui, D., & Zerun, W. (2019). Coupling calculation and analysis of three-dimensional temperature and fluid field for high-power high-speed permanent magnet machine. IET Electric Power Applications, 13(6), 812-818. https://doi.org/10.1049/iet-epa.2018.5725

© The Institution of Engineering and Technology 2019. In order to accurately estimate the temperature rise for high-power high-speed permanent magnet machines (HSPMMs), a novel temperature calculation method considering the non-linear variation of ma... Read More about Coupling calculation and analysis of three-dimensional temperature and fluid field for high-power high-speed permanent magnet machine.

A Nonlinear Extended State Observer for Rotor Position and Speed Estimation for Sensorless IPMSM Drives (2019)
Journal Article
Xu, Z. J., Zhang, T., Bao, Y., Zhang, H., & Gerada, C. (2020). A Nonlinear Extended State Observer for Rotor Position and Speed Estimation for Sensorless IPMSM Drives. IEEE Transactions on Power Electronics, 35(1), 733-743. https://doi.org/10.1109/tpel.2019.2914119

© 1986-2012 IEEE. Sensorless machine drives in vehicle traction frequently experience rapidly-changing load disturbance and demand fast speed dynamics. Without gain-scheduling or compensation, conventional quadrature phase-locked-loop (Q-PLL) is unab... Read More about A Nonlinear Extended State Observer for Rotor Position and Speed Estimation for Sensorless IPMSM Drives.

Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines (2019)
Journal Article
Zeng, Z., Shen, Y., Lu, Q., Gerada, D., Wu, B., Huang, X., & Gerada, C. (2019). Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines. IEEE Transactions on Magnetics, 55(6), 1-7. https://doi.org/10.1109/tmag.2019.2908250

By developing a simple permeance-magnetomotive force (MMF) model of switched-flux permanent magnet (SFPM) machines, the air-gap flux density produced by both PMs and armature current can be derived, in which harmonics with the same order and rotation... Read More about Flux-Density Harmonics Analysis of Switched-Flux Permanent Magnet Machines.

Novel Motor-Shaped Rotational Inductor for Motor Drive Applications (2019)
Journal Article
Odhano, S., Khowja, M. R., Gerada, C., Vakil, G., Abebe, R., Odhano, S. A., Patel, C., & Wheeler, P. (2020). Novel Motor-Shaped Rotational Inductor for Motor Drive Applications. IEEE Transactions on Industrial Electronics, 67(3), 1844-1854. https://doi.org/10.1109/tie.2019.2907512

This paper presents a validation of the novel motor-shaped rotational inductor. To validate the concept, 12 slots 2 poles rotational inductor is tested at different supply frequencies and rotor speeds. Experimental results have shown that the iron lo... Read More about Novel Motor-Shaped Rotational Inductor for Motor Drive Applications.

Fixed switching frequency predictive control of an asymmetric source dual inverter system with a floating bridge for multilevel operation (2019)
Journal Article
Chowdhury, S., Wheeler, P., Huang, Z., Rivera, M., & Gerada, C. (2019). Fixed switching frequency predictive control of an asymmetric source dual inverter system with a floating bridge for multilevel operation. IET Power Electronics, 12(3), 450-457. https://doi.org/10.1049/iet-pel.2018.5395

This study proposes a modified modulated model predictive control (MMPC) scheme to control an open-end winding induction motor drive using an asymmetric source dual inverter with one floating bridge. The control algorithm uses a modulation algorithm... Read More about Fixed switching frequency predictive control of an asymmetric source dual inverter system with a floating bridge for multilevel operation.

High Torque Density Torque Motor With Hybrid Magnetization Pole Arrays for Jet Pipe Servo Valve (2019)
Journal Article
Zhang, Q., Yan, L., Duan, Z., Jiao, Z., Gerada, C., & Chen, I.-M. (2020). High Torque Density Torque Motor With Hybrid Magnetization Pole Arrays for Jet Pipe Servo Valve. IEEE Transactions on Industrial Electronics, 67(3), 2133-2142. https://doi.org/10.1109/tie.2019.2903761

Torque motor is one key component that directly influences the dynamic performance of jet pipe servo valve in aircraft. In this paper, a novel torque motor with hybrid-magnetization pole arrays is proposed. By changing the magnetization patterns of p... Read More about High Torque Density Torque Motor With Hybrid Magnetization Pole Arrays for Jet Pipe Servo Valve.

Fluid flow and heat transfer analysis of TEFC machine end regions using more realistic end-winding geometry (2019)
Journal Article
La Rocca, S., Pickering, S. J., Eastwick, C. N., Gerada, C., & Rönnberg, K. (2019). Fluid flow and heat transfer analysis of TEFC machine end regions using more realistic end-winding geometry. Journal of Engineering, 2019(17), 3831-3835. https://doi.org/10.1049/joe.2018.8026

Here, a typical small low-voltage totally enclosed fan-cooled (TEFC) motor (output power ∼10 kW) has been studied using computational fluid dynamics. The complexity of the end-winding geometries, often consisting of several insulated copper strands b... Read More about Fluid flow and heat transfer analysis of TEFC machine end regions using more realistic end-winding geometry.

The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines (2019)
Journal Article
Zhang, H., Hua, W., Hu, M., Gerada, D., & Gerada, C. (2019). The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines. IEEE Transactions on Magnetics, 55(7), Article 8104205. https://doi.org/10.1109/tmag.2018.2886686

The main purpose of this paper is to investigate the influence of winding location on back electromotive force (EMF) and armature inductance in flux-switching permanent-magnet (FSPM) machines. To obtain an analytical solution, a double-stator-pitch m... Read More about The Influence of Winding Location in Flux-Switching Permanent-Magnet Machines.