Skip to main content

Research Repository

Advanced Search

An experimental investigation of the effect of defect shape and orientation on the burst pressure of pressurised pipes

Al-Owaisi, Sultan; Becker, Adib A.; Sun, Wei; Al-Shabibi, Abdullah; Al-Moharbi, Majid; Pervez, Tasneem; Al-Salmi, Hussain

Authors

Sultan Al-Owaisi

Adib A. Becker a.a.becker@nottingham.ac.uk

Wei Sun

Abdullah Al-Shabibi

Majid Al-Moharbi

Tasneem Pervez

Hussain Al-Salmi



Abstract

The burst pressure of commonly used ductile steel pipes in oil and gas industries, i.e. X52 and X60, is measured under internal pressure loading. The pipes were machined with circular and boxed defects at different orientations to simulate actual metal loss defects. Defect shapes and orientations were investigated in detail to study how they affect the failure behaviour of interacting defects. The experimental burst pressure results were compared with those obtained using existing analytical methods from Design Codes. Comparison of the results showed conservatism in the existing analytical methods which may potentially lead to unnecessary plant shutdowns and pipe repairs. The outcome of the experimental tests revealed that the shapes of the defects have very small influence on the defect interaction behaviour. The burst tests interestingly showed that the defect orientation has an important effect on defect interaction. Defects oriented in the hoop and diagonal directions showed no defect interaction even when spaced by a distance of one wall thickness, while defects oriented in the longitudinal directions showed that defects interact even when the spacing is up to six wall thickness but the interaction fades away for defects spaced at longer distances.

Citation

Al-Owaisi, S., Becker, A. A., Sun, W., Al-Shabibi, A., Al-Moharbi, M., Pervez, T., & Al-Salmi, H. (2018). An experimental investigation of the effect of defect shape and orientation on the burst pressure of pressurised pipes. Engineering Failure Analysis, 93, 200-213. doi:10.1016/j.engfailanal.2018.06.011

Journal Article Type Article
Acceptance Date Jun 15, 2018
Online Publication Date Jun 30, 2018
Publication Date Nov 30, 2018
Deposit Date Jul 4, 2018
Publicly Available Date Jul 1, 2019
Journal Engineering Failure Analysis
Print ISSN 1350-6307
Electronic ISSN 1350-6307
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 93
Pages 200-213
DOI https://doi.org/10.1016/j.engfailanal.2018.06.011
Keywords Defect assessment; Pipe damage; Burst pressure; Ductile carbon steel pipe; Finite element analysis
Public URL http://eprints.nottingham.ac.uk/id/eprint/52756
Publisher URL https://www.sciencedirect.com/science/article/pii/S1350630718300645
Copyright Statement Copyright information regarding this work can be found at the following address: http://creativecommons.org/licenses/by-nc-nd/4.0

Files

++ePrint-Al Owaisi et al-Eng Failure Analysis-Accepted Jun 18.pdf (2.1 Mb)
PDF

Publisher Licence URL
http://creativecommons.org/licenses/by-nc-nd/3.0/

Copyright Statement
Copyright information regarding this work can be found at the following address: http://creativecommons.org/licenses/by-nc-nd/4.0





You might also like



Downloadable Citations