Characterising pulverised fuel ignition in a visual drop tube furnace by use of a high-speed imaging technique

Sarroza, Archi C.; Bennet, Tom D.; Eastwick, Carol; Liu, Hao

Abstract

This study investigates the ignition characteristics of pulverised coal, biomass and co-firing by use of a visual drop tube furnace (VDTF) and a high speed imaging technique. Three coals (anthracite, a bituminous coal and a lignite), four biomasses (Pine, Eucalyptus, Olive Residue and Miscanthus) and various biomass-coal mixtures were tested. With each coal, biomass or their mixture, a distinct flame was established within the VDTF through the continuous feeding of the fuel under the environment of air and at a furnace temperature of 800 °C. To observe the ignition point, a Phantom v12.1 high-speed camera was used to capture the videos of fuel combustion at 500 frames per second (FPS). A technique was developed using MATLAB's image analysis tool to automate the ignition point detection. The results of the image processing were used to statistically analyse and determine the changes to the ignition behaviour with different fuels and co-firing ratios.
The results obtained with the tested coals have shown that the distance to ignition increases as the coal volatile matter content decreases, whereas the opposite trend was found for the biomass fuels. Further, the addition of biomass to the anthracite significantly reduces the distance to ignition but a much less pronounced effect on the ignition was found when biomass was co-fired with the bituminous coal or lignite. The synergistic effect on the ignition of biomass-anthracite mixture is mainly attributed to the high volatile content and the potential effects of catalysis from the alkali metals present in the biomass. The results of this study have shown that the VDTF testing coupled with the image analysis technique allows for an effective and simple method of characterising ignition behaviours of pulverised coal, biomass and their mixtures.

Citation

Sarroza, A. C., Bennet, T. D., Eastwick, C., & Liu, H. (in press). Characterising pulverised fuel ignition in a visual drop tube furnace by use of a high-speed imaging technique. Fuel Processing Technology, 157, https://doi.org/10.1016/j.fuproc.2016.11.002

• Journal Article Type: Article
• Acceptance Date: Nov 4, 2016
• Online Publication Date: Nov 16, 2016
• Deposit Date: Dec 8, 2016
• Publicly Available Date: Dec 8, 2016
• Journal: Fuel Processing Technology
• Print ISSN: 0378-3820
• Electronic ISSN: 1873-7188
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 157
• DOI: https://doi.org/10.1016/j.fuproc.2016.11.002
• Keywords: Pulverised fuel particle; Ignition distance; Combustion image analysis; Visual drop tube furnace; Biomass co-firing with coal
• Public URL: https://nottingham-repository.worktribe.com/output/828346
• Publisher URL: http://www.sciencedirect.com/science/article/pii/S0378382016309584http://dx.doi.org/10.1016/j.fuproc.2016.11.002
• Contract Date: Dec 8, 2016