Minimizing heat transmission loads and improving energy efficiency of building envelopes in sub-Saharan Africa using bio-based composite materials

Opoku, Richard; Obeng, George Y.; Darkwa, Jo; Kwofie, Samuel

Abstract

Increasing effect of climate change coupled with global warming has necessitated the need for mechanical cooling in buildings to provide indoor thermal comfort. Many countries in tropical climates, particularly in sub-Saharan Africa, use sandcrete blocks for constructing building envelopes which have relatively high thermal conductivity. This leads to increased heat transmission through the building walls resulting in increased building electricity consumption using air-conditioners. This study focused on opportunity of minimizing the thermal conductivity of sandcrete blocks by mixing it with available bio-based local materials, specifically treated sawdust and palm fibers. Experiments were conducted to determine the thermal conductivity, compressive strength and densities of sandcrete mixed with 10%, 20%, 30% and 40% of treated sawdust and palm fiber to form building block composites. The study results showed that incorporating the bio-based material into the sandcrete decreases its density and thermal conductivity, thereby decreasing the wall heat transmission load. Using a minimum standard limit of 3 MPa for compressive strength for building envelopes, the composite samples: S10, P10, P20 and P30 were found to be appropriate to be used to minimize wall heat transmission. The composite of 70% sandcrete with 30% treated palm fiber (P30) exhibited the best thermal performance with 38% reduction in thermal conductivity compared to the control sandcrete block. Maximum wall heat flux reduction of 52 W/m2 was attained at peak load with the composite P30 compared to the control sample P0 (100% sandcrete). In addition, using the degree-days cooling for Ghana, the analysis indicated maximum electricity saving potential of 453.40 kWh per year for an office space cooling using the sandcrete-palm fiber composite P30 as the building envelope.

Citation

Opoku, R., Obeng, G. Y., Darkwa, J., & Kwofie, S. (2020). Minimizing heat transmission loads and improving energy efficiency of building envelopes in sub-Saharan Africa using bio-based composite materials. Scientific African, 8, Article e00358. https://doi.org/10.1016/j.sciaf.2020.e00358

• Journal Article Type: Article
• Acceptance Date: Mar 18, 2020
• Online Publication Date: Mar 20, 2020
• Publication Date: 2020-07
• Deposit Date: Apr 22, 2020
• Publicly Available Date: Apr 22, 2020
• Journal: Scientific African
• Print ISSN: 2468-2276
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 8
• Article Number: e00358
• DOI: https://doi.org/10.1016/j.sciaf.2020.e00358
• Public URL: https://nottingham-repository.worktribe.com/output/4326458
• Publisher URL: https://www.sciencedirect.com/science/article/pii/S246822762030096X
• Additional Information: This article is maintained by: Elsevier; Article Title: Minimizing heat transmission loads and improving energy efficiency of building envelopes in sub-Saharan Africa using bio-based composite materials; Journal Title: Scientific African; CrossRef DOI link to publisher maintained version: https://doi.org/10.1016/j.sciaf.2020.e00358; Content Type: article; Copyright: © 2020 The Authors. Published by Elsevier B.V. on behalf of African Institute of Mathematical Sciences / Next Einstein Initiative.