Skip to main content

Research Repository

Advanced Search

CFD simulation of a concentrated salt nanofluid flow boiling in a rectangular tube

Mohammed, Hayder I.; Giddings, Donald; Walker, Gavin S.

Authors

Hayder I. Mohammed

Gavin S. Walker



Contributors

Hayder Mohammed
Researcher

Gavin Walker
Supervisor

Abstract

© 2018 Elsevier Ltd Improvement of heat transfer and critical heat flux (CHF) via nanofluid in pool boiling is well known. Flow boiling is usually represented by heat transfer correlations. But in the case of a concentrated salt solution nanofluid, there is no suitable representation. A model is generated using commercial CFD code with additional user defined function, (UDF) to address this for the case of determining the heat and mass transfer in a boiler duct for a vapour absorption refrigerator. Computational fluid dynamics (CFD) simulations are performed to assess the effect of varying nanoparticle concentrations, fluid velocity and boiler temperature on the boiling and phase change characteristics of the system. Four phases are treated in this case, which were liquid acetone, vapour acetone, liquid Acetone/ZnBr2 solution and solid nanoparticles cloud. Zinc oxide nanoparticles are represented as a cloud-like phase in the mixture. In addition, this study evaluates the key characteristics of the nanofluid system, and how the different components and phases behave when the single component evaporates. Previous research concentrates on water based fluids or commonly found refrigerants and heat transfer fluids. In this work the process was modelled using ANSYS® Fluent V.15 using the mixture multiphase flow model, however, the volume of fluid (VOF) method is also used to show the behaviour of the vapour phase. A UDF was applied from the literature (LEE, 1980) for boiling of nanofluids to model the mass transfer on boiling. It was found that increase in nanoparticle loading (0, 0.1, 0.3, 0.5 & 1 vol%) leads to an increase in the exiting vapour volume fraction and the heat transfer coefficient. This is primarily due to an increase in the heat transfer in the system due to the increased thermal conductivity in the nanofluid. Incremental increases in the boiler temperature (330, 333, 335 K) creates an increase in both vapour volume fraction and heat transfer coefficient because the process still in the nucleate boiling which, the heat flux increase with increasing the temperature difference. This new approach for the four phase system is capable to demonstrating concentrated salt solution nanofluid boiling.

Citation

Mohammed, H. I., Giddings, D., & Walker, G. S. (2018). CFD simulation of a concentrated salt nanofluid flow boiling in a rectangular tube. International Journal of Heat and Mass Transfer, 125, 218-228. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.069

Journal Article Type Article
Acceptance Date Apr 15, 2018
Online Publication Date Apr 22, 2018
Publication Date 2018-10
Deposit Date Oct 3, 2019
Journal International Journal of Heat and Mass Transfer
Print ISSN 0017-9310
Electronic ISSN 0017-9310
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 125
Pages 218-228
DOI https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.069
Keywords Mechanical Engineering; Condensed Matter Physics; Fluid Flow and Transfer Processes
Public URL https://nottingham-repository.worktribe.com/output/2743626
Publisher URL https://www.sciencedirect.com/science/article/pii/S0017931017348548?via%3Dihub