A neural network approach for determining spatial and geometry dependent Green's functions for thermal stress approximation in power plant header components

Rouse, J.P.; Hyde, C.J.; Morris, A.

Abstract

The trend in power generation to operate plant with a greater frequency of on/partial/off load conditions creates several concerns for the long term structural integrity of many high temperature components. The Green's function method has been used for many years to estimate the thermal stresses in components such as steam headers by attempting to solve the un-coupled thermal stress problem for a unit temperature step. Once a Green's function for a unit temperature step has been determined, realistic or actual component temperature profiles can be discretised and the time dependent stress profile reconstructed using Duhamel's theorem. Stress fluctuations can therefore be estimated and damage due to fatigue mechanisms can be quantified. A potential difficulty with this method is that Green's function approximations are determined for a single analysis point in a structure. This is because Green's functions are approximated by fitting a trial function to the results of finite element (FE) simulations. While a user can make some judgement on which point in a structure will give the “worst case” (or life limiting) conditions, it is foreseeable that points of interest will be dependent on the specific analysis conditions, such as the stub penetration geometry and the loading condition considered. The neural network approach described in this paper provides a means where transient thermal stress models of complex components (here taken to be steam headers) can be generated relatively quickly and used pro-actively to assess and modify plant operation. A range of header geometries have been considered to make the network applicable over an industry relevant envelope. Coefficients of determination (R2) are typically above 0.92 when reconstructed (from neural network results) unit temperature step stress profiles are compared against “true” FEA results. Mean errors in the stress profiles are, for the majority of cases, less than 10%. Suggestions are also made on possible future improvements to the method through the use of additional constraints on the reconstructed stress profiles.

Citation

Rouse, J., Hyde, C., & Morris, A. (2018). A neural network approach for determining spatial and geometry dependent Green's functions for thermal stress approximation in power plant header components. International Journal of Pressure Vessels and Piping, 168, 269-288. https://doi.org/10.1016/j.ijpvp.2018.10.020

• Journal Article Type: Article
• Acceptance Date: Oct 31, 2018
• Online Publication Date: Nov 12, 2018
• Publication Date: 2018-12
• Deposit Date: Nov 13, 2018
• Publicly Available Date: Nov 13, 2019
• Journal: International Journal of Pressure Vessels and Piping
• Print ISSN: 0308-0161
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 168
• Pages: 269-288
• DOI: https://doi.org/10.1016/j.ijpvp.2018.10.020
• Keywords: Power plant; Header; Green's function; Thermal stress; Neural network
• Public URL: https://nottingham-repository.worktribe.com/output/1245598
• Publisher URL: https://www.sciencedirect.com/science/article/pii/S0308016117302752?via%3Dihub