Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings

Chen, H.; Rushworth, A.; Sun, W.; He, J.; Guo, H.

Abstract

Small punch testing exhibits great potential in mechanical characterisation of thin coatings. This testing method can be used to determine the mechanical performance of thermally sprayed coatings, especially to qualitatively characterise the effects of coating defects on the mechanical behaviour. In this work, some considerations in using the small punch testing for coatings are presented through a microstructure evolution analysis of a vacuum plasma sprayed CoNiCrAlY coating under small punch test. The CoNiCrAlY coating was characterised with a large number of un-melted particles as the coating defects. It is shown that the clamping in the small punch test rig can result in micro-cracking around the un-melted particles in the coating prior to testing. It is also found that the un-melted particles in the coating act as predominant cracking sites and fast failure occurred around the un-melted particles. Careful considerations need to be taken into account when using the small punch test for coatings to avoid any changes in the coating microstructure and plasticity during the clamping stage.

Citation

Chen, H., Rushworth, A., Sun, W., He, J., & Guo, H. (2019). Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings. Surface and Coatings Technology, 357, 684-690. https://doi.org/10.1016/j.surfcoat.2018.10.080

• Journal Article Type: Article
• Acceptance Date: Oct 26, 2018
• Online Publication Date: Nov 28, 2018
• Publication Date: Jan 15, 2019
• Deposit Date: Nov 2, 2018
• Publicly Available Date: Nov 28, 2018
• Journal: Surface and Coatings Technology
• Print ISSN: 0257-8972
• Electronic ISSN: 1879-3347
• Publisher: Elsevier
• Peer Reviewed: Peer Reviewed
• Volume: 357
• Pages: 684-690
• DOI: https://doi.org/10.1016/j.surfcoat.2018.10.080
• Keywords: Small punch test; Mechanical behaviour; CoNiCrAlY coatings; Un-melted particles; Cracking
• Public URL: https://nottingham-repository.worktribe.com/output/1220823
• Publisher URL: https://www.sciencedirect.com/science/article/pii/S0257897218311873?via%3Dihub
• Additional Information: This article is maintained by: Elsevier; Article Title: Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings; Journal Title: Surface and Coatings Technology; CrossRef DOI link to publisher maintained version: https://doi.org/10.1016/j.surfcoat.2018.10.080; Content Type: article; Copyright: © 2018 Elsevier B.V. All rights reserved.
• Contract Date: Nov 5, 2018