Skip to main content

Research Repository

Advanced Search

Calcium leaching from waste steelmaking slag: Significance of leachate chemistry and effects on slag grain mineralogy

HALL, CALLUM; LARGE, DAVID; ADDERLEY, BRUCE; WEST, HELEN

Authors

CALLUM HALL

DAVID LARGE David.Large@nottingham.ac.uk
Abbott Professor of Geoscience

BRUCE ADDERLEY

HELEN WEST helen.west@nottingham.ac.uk
Associate Professor



Abstract

Accelerated carbonation of alkaline wastes such as steelmaking slag offers the potential to combine waste valorisation with climate change mitigation by utilising carbon dioxide (CO2). One method of achieving this is through an indirect carbonation process to produce a marketable precipitated calcium carbonate (PCC), using ammonium salts to selectively extract calcium from steelmaking slag. Two unaddressed design parameters for a slag based plant differing from that of a traditional PCC plant are the effect of mineralogy on extraction efficiency when using a multicomponent, heterogeneous feed such as slag and the challenges raised by the resulting leachate chemistry. This paper presents petrographic textural observations on the effect of calcium leaching via ammonium chloride on individual grains of dicalcium silicate in three different widely unutilised steelmaking slags. These observations are then interpreted in conjunction with measured changes in solution leachate chemistry. The results indicate that although silica enriched regions form at the reaction front, the reaction continues into the core of the particle due to fracture propagation caused by volume reduction as calcium is extracted. Co-leaching of sulfur alongside calcium and the formation of precipitate in the leachate highlights potential engineering challenges when the process is scaled up due to fouling of process equipment. The main mineral phases in all untreated slags were found to be calcium silicates, predominantly dicalcium silicate (Ca 2SiO4). This was followed by a complex mixture of calcium/magnesium-wustite (CaFeMnMg)O type phases and srebrodolskite (Ca 2Fe2O5(Ti, V)). Results indicate that calcium silicate is the more reactive component of BOS slag, while lime bound as (CaFeMnMg)O is most reactive in HMD and SS slags. Selectivity of the ammonium chloride solvent was high at 95-97% and efficiency of calcium extraction ranged between 25% and 39%. © 2014 Elsevier Ltd. All rights reserved.

Citation

HALL, C., LARGE, D., ADDERLEY, B., & WEST, H. (2014). Calcium leaching from waste steelmaking slag: Significance of leachate chemistry and effects on slag grain mineralogy. Minerals Engineering, 65, 156-162. https://doi.org/10.1016/j.mineng.2014.06.002

Journal Article Type Article
Acceptance Date Jun 6, 2014
Online Publication Date Jul 1, 2014
Publication Date Oct 15, 2014
Deposit Date Apr 18, 2017
Journal Minerals Engineering
Print ISSN 0892-6875
Publisher Elsevier
Peer Reviewed Peer Reviewed
Volume 65
Pages 156-162
DOI https://doi.org/10.1016/j.mineng.2014.06.002
Public URL https://nottingham-repository.worktribe.com/output/1099523
Publisher URL https://www.sciencedirect.com/science/article/pii/S0892687514002003?via%3Dihub