Outputs (726)

Design and Manufacture of Structural Composites (2023)
Book
Harper, L., & Clifford, M. (Eds.). (2023). Design and Manufacture of Structural Composites. Elsevier. https://doi.org/10.1016/c2018-0-05165-8

Design and Manufacture of Structural Composites provides an overview of the main manufacturing challenges encountered when processing fibre-reinforced composite materials. Composites are unique in that the material is created at the same time as the... Read More about Design and Manufacture of Structural Composites.

Cost, rate, and robustness (2023)
Book Chapter
Hancock, S., & Harper, L. (2023). Cost, rate, and robustness. In Design and Manufacture of Structural Composites (447-471). Elsevier. https://doi.org/10.1016/B978-0-12-819160-6.00022-6

This chapter outlines the most important considerations for the economic evaluation of composites, as assessing both cost and performance in parallel is critical for designing and manufacturing efficient applications. The cost of raw materials is oft... Read More about Cost, rate, and robustness.

Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning (2023)
Presentation / Conference Contribution
Torayev, A., Abadia, J. J. P., Martínez-Arellano, G., Cuesta, M., Chaplin, J. C., Larrinaga, F., Sanderson, D., Arrazola, P. J., & Ratchev, S. (2023, October). Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning. Presented at 56th CIRP Conference onManufacturing Systems, CIRP CMS ‘23, Cape Town

In manufacturing, different costs must be considered when selecting the optimal manufacturing configuration. Costs include manufacturing costs, material costs, labor costs, and overhead costs. Optimal manufacturing configurations are those that minim... Read More about Optimal Manufacturing Configuration Selection: Sequential Decision Making and Optimization using Reinforcement Learning.

Comparing different approaches of agent-based occupancy modelling for predicting realistic electricity consumption in office buildings (2023)
Journal Article
Mashuk, M. S., Pinchin, J., Siebers, P.-O., & Moore, T. (2024). Comparing different approaches of agent-based occupancy modelling for predicting realistic electricity consumption in office buildings. Journal of Building Engineering, 84, Article 108420. https://doi.org/10.1016/j.jobe.2023.108420

Having a good grasp on modelling the dynamics of occupants for estimating electricity consumption in office buildings is a vital asset for realistic predictions. Nowadays, agent-based models are widely used for this purpose. Previous approaches to mo... Read More about Comparing different approaches of agent-based occupancy modelling for predicting realistic electricity consumption in office buildings.

Two-dimensional to three-dimensional dry fibre preforming (2023)
Book Chapter
Chen, S., & Harper, L. (2023). Two-dimensional to three-dimensional dry fibre preforming. In Design and Manufacture of Structural Composites (101-123). Elsevier. https://doi.org/10.1016/B978-0-12-819160-6.00005-6

Preforming is the process of converting two-dimensional (2D) intermediate fibre products, such as fabrics and mats, into complex three-dimensional (3D) shapes to resemble the geometry of the final component. Preforming is a necessary step for all liq... Read More about Two-dimensional to three-dimensional dry fibre preforming.

Inverse design of shape-morphing structures based on functionally graded composites (2023)
Presentation / Conference Contribution
Kansara, H., Liu, M., He, Y., & Tan, W. (2023, July). Inverse design of shape-morphing structures based on functionally graded composites. Presented at 23rd International Conference on Composite Materials, Belfast, United Kingdom

Towards the Contemporary Conservation of Cultural Heritages: An Overview of Their Conservation History (2023)
Journal Article
Li, L., & Tang, Y. (2024). Towards the Contemporary Conservation of Cultural Heritages: An Overview of Their Conservation History. Heritage, 7(1), 175-192. https://doi.org/10.3390/heritage7010009

This paper seeks contemporary cultural heritage conservation principles by reviewing its history, starting from the 18th century, in practices, international documents, and the literature on this topic. It intends to lay a foundation to avoid damagin... Read More about Towards the Contemporary Conservation of Cultural Heritages: An Overview of Their Conservation History.

Storage Sites for Carbon Dioxide in the North Sea and Their Particular Characteristics (2023)
Journal Article
Rigby, S. P., & Alsayah, A. (2024). Storage Sites for Carbon Dioxide in the North Sea and Their Particular Characteristics. Energies, 17(1), Article 211. https://doi.org/10.3390/en17010211

This paper reviews and evaluates work on the structural complexity of the potential carbon dioxide storage sites in the North Sea, including the nature of the reservoir structures, the reservoir rocks, the presence of inter-layers, faults, and fractu... Read More about Storage Sites for Carbon Dioxide in the North Sea and Their Particular Characteristics.

Reduced Computational Burden of Modulated Model-Predictive Control for Synchronous Reluctance Motor Drive Applications (2023)
Presentation / Conference Contribution
Riccio, J., Karamanakos, P., Degano, M., Gerada, C., & Zanchetta, P. (2023, October). Reduced Computational Burden of Modulated Model-Predictive Control for Synchronous Reluctance Motor Drive Applications. Presented at 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023, Nashville, TN. USA

This paper introduces a novel geometric approach to significantly reduce the computational burden of modulated predictive controllers while maintaining the same steady-state performance and satisfactory dynamic behavior. The proposed geometric method... Read More about Reduced Computational Burden of Modulated Model-Predictive Control for Synchronous Reluctance Motor Drive Applications.

Nano-Scale Engineering of Heterojunction for Alkaline Water Electrolysis (2023)
Journal Article
Chen, Y., Xu, Z., & Chen, G. Z. (2024). Nano-Scale Engineering of Heterojunction for Alkaline Water Electrolysis. Materials, 17(1), Article 199. https://doi.org/10.3390/ma17010199

Alkaline water electrolysis is promising for low-cost and scalable hydrogen production. Renewable energy-driven alkaline water electrolysis requires highly effective electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution... Read More about Nano-Scale Engineering of Heterojunction for Alkaline Water Electrolysis.