Outputs (64)

Correction to: Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance (2022)
Journal Article
Lynam, A., Romero, A. R., Xu, F., Wellman, R. G., & Hussain, T. (2022). Correction to: Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance. Journal of Thermal Spray Technology, 31(6), 2001-2001. https://doi.org/10.1007/s11666-022-01411-2

When originally published, the author list contained an incorrect initial for the fourth listed author. The name should have been published to read: R. G. Wellman. The original article has been corrected.

Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying (2022)
Journal Article
Akisin, C. J., Bennett, C. J., Venturi, F., Assadi, H., & Hussain, T. (2022). Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying. Journal of Thermal Spray Technology, 31(4), 1085-1111. https://doi.org/10.1007/s11666-022-01377-1

The bonding mechanisms of a wide range of metallic materials in cold spraying have been studied, mainly attributed to adiabatic shear instability (ASI) at high strain rates, whereas the impact and deformation behavior of high entropy alloys (HEAs) on... Read More about Numerical and Experimental Analysis of the Deformation Behavior of CoCrFeNiMn High Entropy Alloy Particles onto Various Substrates During Cold Spraying.

Thermal Spray Coatings for Electromagnetic Wave Absorption and Interference Shielding: A Review and Future Challenges (2022)
Journal Article
Faisal, N. H., Ahmed, R., Sellami, N., Prathuru, A., Njuguna, J., Venturi, F., Hussain, T., Nezhad, H. Y., Katiyar, N. K., Goel, S., Upadhyaya, H., Joshi, S., Muhammad-Sukki, F., Prabhu, R., Mallick, T., Whittow, W., & Kamnis, S. (2022). Thermal Spray Coatings for Electromagnetic Wave Absorption and Interference Shielding: A Review and Future Challenges. Advanced Engineering Materials, 24(7), Article 2200171. https://doi.org/10.1002/adem.202200171

This review aims to consolidate scattered literature on thermally sprayed coatings with nonionizing electromagnetic (EM) wave absorption and shielding over specific wavelengths potentially useful in diverse applications (e.g., microwave to millimeter... Read More about Thermal Spray Coatings for Electromagnetic Wave Absorption and Interference Shielding: A Review and Future Challenges.

High temperature (900 °C) sliding wear of CrNiAlCY coatings deposited by high velocity oxy fuel thermal spray (2022)
Journal Article
Derelizade, K., Rincon, A., Venturi, F., Wellman, R. G., Kholobystov, A., & Hussain, T. (2022). High temperature (900 °C) sliding wear of CrNiAlCY coatings deposited by high velocity oxy fuel thermal spray. Surface and Coatings Technology, 432, Article 128063. https://doi.org/10.1016/j.surfcoat.2021.128063

Nickel based superalloy are in demand for high temperature applications and their corrosion, erosion and wear resistance have been investigated for a long time. Nickel chromium (NiCr) alloys are widely used for corrosion resistant coatings, while chr... Read More about High temperature (900 °C) sliding wear of CrNiAlCY coatings deposited by high velocity oxy fuel thermal spray.

Interaction of CMAS on thermal sprayed ytterbium disilicate environmental barrier coatings: A story of porosity (2021)
Journal Article
Tejero-Martin, D., Romero, A. R., Wellman, R. G., & Hussain, T. (2022). Interaction of CMAS on thermal sprayed ytterbium disilicate environmental barrier coatings: A story of porosity. Ceramics International, 48(6), 8286-8296. https://doi.org/10.1016/j.ceramint.2021.12.033

Molten calcium magnesium alumina-silicates (CMAS) represent a challenge for the current generation of rare earth silicates environmental barrier coatings (EBCs). Their interaction with ytterbium disilicate (Yb2Si2O7) free-standing coatings deposited... Read More about Interaction of CMAS on thermal sprayed ytterbium disilicate environmental barrier coatings: A story of porosity.

Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating (2021)
Journal Article
Leng, K., Rincon Romero, A., Venturi, F., Ahmed, I., & Hussain, T. (2022). Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating. Journal of the European Ceramic Society, 42(4), 1594-1607. https://doi.org/10.1016/j.jeurceramsoc.2021.11.050

Gadolinium zirconate (GZ) is an attractive material for thermal barrier coatings (TBCs). However, a single layer GZ coating has poor thermal cycling life compared to Yttria Stabilized Zirconia (YSZ). In this study, Solution Precursor High Velocity Ox... Read More about Solution precursor thermal spraying of gadolinium zirconate for thermal barrier coating.

A convolution-based approach to cold spray additive manufacturing (2021)
Journal Article
Venturi, F., Gilfillan, N., & Hussain, T. (2021). A convolution-based approach to cold spray additive manufacturing. Additive Manufacturing, 1, Article 100014. https://doi.org/10.1016/j.addlet.2021.100014

Cold Spray Additive Manufacturing (CSAM) is a well-established technology that has recently attracted interest for forming 3D shapes in a fast and scalable fashion. Nonetheless, the resulting surface of cold sprayed parts normally requires post-depos... Read More about A convolution-based approach to cold spray additive manufacturing.

Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process (2021)
Journal Article
Bano, S., Rincon Romero, A., Islam, M. T., Grant, D. M., Ahmed, I., & Hussain, T. (2021). Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process. Journal of Thermal Spray Technology, 30(7), 1862-1874. https://doi.org/10.1007/s11666-021-01233-8

Phosphate based glasses (PBGs) are promising materials for biomedical applications due to their biocompatible and fully resorbable characteristics in aqueous environments. These glasses can be coated on to metal substrate via the technique of suspens... Read More about Development and Characterization of Phosphate-Based Glass Coatings via Suspension High-Velocity Oxy-Fuel (SHVOF) Thermal Spray Process.

Wear performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray (2021)
Journal Article
Derelizade, K., Venturi, F., Wellman, R. G., Kholobysov, A., & Hussain, T. (2021). Wear performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray. Wear, 482-483, Article 203974. https://doi.org/10.1016/j.wear.2021.203974

WC-Co coatings have been used as wear resistant coatings in aero engines for decades, and research is still ongoing to further improve the performance of these coatings through compositional modifications to reduce wear. The coatings are used for unl... Read More about Wear performance of graphene nano platelets incorporated WC-Co coatings deposited by hybrid high velocity oxy fuel thermal spray.

YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray (2021)
Journal Article
Owoseni, T. A., Rincon Romero, A., Pala, Z., Venturi, F., Lester, E. H., Grant, D. M., & Hussain, T. (2021). YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray. Ceramics International, 47(17), 23803-23813. https://doi.org/10.1016/j.ceramint.2021.05.087

Yttrium aluminium garnet (YAG) is a promising topcoat material for thermal barrier coatings due to its high temperature stability and better CMAS (calcium-magnesium-alumino-silicate) resistance. YAG topcoats were deposited by suspension and solution... Read More about YAG thermal barrier coatings deposited by suspension and solution precursor thermal spray.