Outputs (36)

Effect of humidity and oxygen on friction, wear and durability of a polymer-bonded molybdenum disulfide (MoS2)-based dry film lubricant (DFL) coating system in large amplitude fretting (2024)
Journal Article
Laolu-Balogun, E., Owen, S., Read, S., Shipway, P., & Voisey, K. (2024). Effect of humidity and oxygen on friction, wear and durability of a polymer-bonded molybdenum disulfide (MoS2)-based dry film lubricant (DFL) coating system in large amplitude fretting. Wear, 552-553, Article 205426. https://doi.org/10.1016/j.wear.2024.205426

Investigations into effects of humidity and oxygen on a polymer-bonded MoS2-based dry film lubricant (DFL) coating, on grit-blasted Ti-6Al-4V using a cylinder-on-flat configuration, are reported. Sustained low friction and low wear occurred in both l... Read More about Effect of humidity and oxygen on friction, wear and durability of a polymer-bonded molybdenum disulfide (MoS2)-based dry film lubricant (DFL) coating system in large amplitude fretting.

Laser cladding: A high-speed-imaging examination of powder catchment efficiency as a function of the melt pool geometry and its position under the powder stream (2023)
Journal Article
Koti, D., Powell, J., Naesstroem, H., Spaccapaniccia, C., & Voisey, K. T. (2023). Laser cladding: A high-speed-imaging examination of powder catchment efficiency as a function of the melt pool geometry and its position under the powder stream. Journal of Laser Applications, 35(4), Article 042065. https://doi.org/10.2351/7.0001199

This paper provides quantitative information about the paths taken by blown powder particles during laser cladding. A proportion of the powder is "wasted" by bouncing off the solid areas surrounding the melt pool. This wastage reduces the productivit... Read More about Laser cladding: A high-speed-imaging examination of powder catchment efficiency as a function of the melt pool geometry and its position under the powder stream.

Lifetime of MoS2 based DFL systems in fretting with and without a Cu-Ni-In under-layer: the dependence on the topography of the surface onto which the DFL is deposited (2023)
Journal Article
Laolu-Balogun, E., Owen, S., Booth, T., Pattinson, G., Shipway, P., & Voisey, K. (2023). Lifetime of MoS2 based DFL systems in fretting with and without a Cu-Ni-In under-layer: the dependence on the topography of the surface onto which the DFL is deposited. Tribology International, 188, Article 108863. https://doi.org/10.1016/j.triboint.2023.108863

The superior fretting performance of polymer-bonded MoS2-based dry film lubricant (DFL) coating on a plasma-sprayed Cu-Ni-In under-layer is well known. The Cu-Ni-In under-layer changes both the material and the topography of the sur... Read More about Lifetime of MoS2 based DFL systems in fretting with and without a Cu-Ni-In under-layer: the dependence on the topography of the surface onto which the DFL is deposited.

Powder catchment efficiency in laser cladding (directed energy deposition). An investigation into standard laser cladding and the ABA cladding technique (2023)
Journal Article
Koti, D., Powell, J., Naesstroem, H., & Voisey, K. T. (2023). Powder catchment efficiency in laser cladding (directed energy deposition). An investigation into standard laser cladding and the ABA cladding technique. Journal of Laser Applications, 35, Article 012025. https://doi.org/10.2351/7.0000904

This paper investigates the efficiency of powder catchment in blown powder laser cladding (a directed energy deposition technique). A comparison is made between standard “track by overlapping track” cladding (“AAA” cladding) and “ABA” cladding, where... Read More about Powder catchment efficiency in laser cladding (directed energy deposition). An investigation into standard laser cladding and the ABA cladding technique.

Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers (2023)
Journal Article
Powell, J., Koti, D., Garmendia, X., & Voisey, K. T. (2023). Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers. Journal of Laser Applications, 35(1), Article 012024. https://doi.org/10.2351/7.0000897

This paper provides guidelines and advice to researchers and engineers in the field of laser cladding and related direct energy deposition techniques to help establish a standardized approach to quality assessment and productivity metrics. Factors co... Read More about Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers.

Improving laser cladding productivity with ‘ABA’ cladding (2022)
Presentation / Conference Contribution
Koti, D., Powell, J., & Voisey, K. (2022). Improving laser cladding productivity with ‘ABA’ cladding. Procedia CIRP, 111, 205-209. https://doi.org/10.1016/j.procir.2022.08.048

Laser Cladding is one of several processes within Additive Manufacturing and usually involves the production of a clad surface by adding parallel, overlapping lines of clad material to the surface of a substrate. In this work a new laser cladding tec... Read More about Improving laser cladding productivity with ‘ABA’ cladding.

Fibre laser cutting: the use of carbon-filled acrylic as a qualitative and quantitative analysis tool (2018)
Journal Article
Atiyah, H., Powell, J., Petring, D., Stoyanov, S., & Voisey, K. (2018). Fibre laser cutting: the use of carbon-filled acrylic as a qualitative and quantitative analysis tool. Journal of Laser Applications, 30(3), Article 032009. https://doi.org/10.2351/1.5045349

The use of carbon filled black acrylic (CFBA) as a quantitative and qualitative analytical tool for fibre laser cutting is investigated. In the qualitative work CFBA targets placed below the laser cutting zone when cutting stainless steel showed a d... Read More about Fibre laser cutting: the use of carbon-filled acrylic as a qualitative and quantitative analysis tool.

The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model (2018)
Journal Article
Barman, K., Shipway, P., Voisey, K., & Pattinson, G. (2018). The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model. Tribology International, 123, https://doi.org/10.1016/j.triboint.2018.03.018

Dry film lubricant coatings (DFL) are employed to reduce friction and damage in highly loaded contacts. Metallic underlayers, e.g. CuNiIn, can be beneficial however, there is no detailed explanation of the mechanism. This work investigates the effect... Read More about The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model.

An investigation into whether the laser drilling capabilities of a 2kW fibre laser can be enhanced using pulse train shaping (2018)
Journal Article
Markcoons, D., & Voisey, K. (2018). An investigation into whether the laser drilling capabilities of a 2kW fibre laser can be enhanced using pulse train shaping. Lasers in Engineering, 39(1-2),

In long, ms, pulsed melt ejected based laser drilling of metals pulse train shaping has previously improved drilling efficiency. This work investigates if pulse train shaping can be exploited in the laser drilling of 0.8-2 mm mild steel with a 1070 n... Read More about An investigation into whether the laser drilling capabilities of a 2kW fibre laser can be enhanced using pulse train shaping.

The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating (2017)
Journal Article
Daure, J., Voisey, K., Shipway, P., & Stewart, D. (2017). The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating. Surface and Coatings Technology, 324, https://doi.org/10.1016/j.surfcoat.2017.06.009

This paper investigates the effect of substrate surface finish and deposition conditions of PVD multilayer Inconel 625/Cr coatings on their ability to act as a corrosion-barrier. The corrosion-barrier performance of the coatings was characterized by... Read More about The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating.