Outputs (220)

Harnessing MOF-based and derived catalysts for efficient BTEX oxidation: Progress, challenges, and future directions (2025)
Journal Article
Murindababisha, D., Wang, Z., Xiao, Z., Yusuf, A., Chen, G. Z., Li, J., & He, J. (2025). Harnessing MOF-based and derived catalysts for efficient BTEX oxidation: Progress, challenges, and future directions. Journal of Environmental Chemical Engineering, 13(2), Article 115781. https://doi.org/10.1016/j.jece.2025.115781

Metal-organic framework (MOF)-derived catalysts have emerged as promising materials for the catalytic oxidation of BTEX (benzene, toluene, ethylbenzene, and xylene) pollutants due to their high surface area, customizable pore structures, and uniform... Read More about Harnessing MOF-based and derived catalysts for efficient BTEX oxidation: Progress, challenges, and future directions.

Dynamic Superficial Dielectric Constant Models and Void Fraction Prediction by Microwave Resonant Cavity for Gas Liquid Flow (2025)
Journal Article
Yang, Y., Liu, M., Liu, J., Xu, Y., Ma, H., Liu, Y., Yuan, C., Hewakandamby, B., & Dimitrakis, G. (in press). Dynamic Superficial Dielectric Constant Models and Void Fraction Prediction by Microwave Resonant Cavity for Gas Liquid Flow. IEEE Transactions on Instrumentation and Measurement,

In the investigation of non-uniform flow measurement utilizing microwave technologies, both the dielectric properties and phase fraction of the flow are crucial factors. This study introduces a new concept of dynamic superficial dielectric constant (... Read More about Dynamic Superficial Dielectric Constant Models and Void Fraction Prediction by Microwave Resonant Cavity for Gas Liquid Flow.

Technical, economic and lifecycle greenhouse gas emissions analyses of solid sorbent direct air capture technologies (2025)
Journal Article
Lilonfe, S., Rodgers, S., Abdul-Manan, A. F., Dimitriou, I., & McKechnie, J. (2025). Technical, economic and lifecycle greenhouse gas emissions analyses of solid sorbent direct air capture technologies. Carbon Capture Science & Technology, 15, Article 100380. https://doi.org/10.1016/j.ccst.2025.100380

Achieving net zero emissions by 2050 will require the development of cost-effective and CO2-efficient direct air capture (DAC) technology to remove atmospheric CO2. This study presents a comprehensive assessment of five solid sorbents under different... Read More about Technical, economic and lifecycle greenhouse gas emissions analyses of solid sorbent direct air capture technologies.

Integrated Remote Sensing for Enhanced Drought Assessment: A Multi‐Index Approach in Rajasthan, India (2025)
Journal Article
Agarwal, V., Vishvendra Raj Singh, B., Marsh, S., Qin, Z., Sen, A., & Kulhari, K. (2025). Integrated Remote Sensing for Enhanced Drought Assessment: A Multi‐Index Approach in Rajasthan, India. Earth and Space Science, 12(2), Article e2024EA003639. https://doi.org/10.1029/2024EA003639

This study investigates land use, land cover (LULC) changes, vegetation health, and drought severity in Rajasthan, India, from 1985 to 2020 using remote sensing techniques. By analyzing satellite imagery with the normalized difference vegetation inde... Read More about Integrated Remote Sensing for Enhanced Drought Assessment: A Multi‐Index Approach in Rajasthan, India.

The effect of high pressure on hydrocarbon generation from Type-I kerogen source rocks: Implications for petroleum system evolution (2025)
Journal Article
Khairy, A., Uguna, C. N., Vane, C. H., El Diasty, W. S., Peters, K. E., Snape, C. E., Farouk, S., & Meredith, W. (2025). The effect of high pressure on hydrocarbon generation from Type-I kerogen source rocks: Implications for petroleum system evolution. International Journal of Coal Geology, 300, Article 104708. https://doi.org/10.1016/j.coal.2025.104708

This study examines the effect of high water pressure (up to 900 bar) on hydrocarbon generation from Type-I kerogen-rich source rocks and compares the results with previously observed effects on Type-II and Type-III kerogens. An immature Type-I oil s... Read More about The effect of high pressure on hydrocarbon generation from Type-I kerogen source rocks: Implications for petroleum system evolution.

Self-regulatory lean-electrolyte flow for building 600 Wh kg -1 -level rechargeable lithium batteries (2025)
Journal Article
Shi, Z., Hao, P., He, Y., Zhang, Y., Hu, S., Shen, Y., Gu, Q., Zhang, L., Chen, G. Z., Hu, D., Liu, Z., & Qiu, B. (2025). Self-regulatory lean-electrolyte flow for building 600 Wh kg -1 -level rechargeable lithium batteries. Advanced Materials, https://doi.org/10.1002/adma.202419377

Reducing excess electrolytes offers a promising approach to improve the specific energy of electrochemical energy storage devices. However, using lean electrolytes presents a significant challenge for porous electrode materials due to heterogeneous w... Read More about Self-regulatory lean-electrolyte flow for building 600 Wh kg -1 -level rechargeable lithium batteries.

Novel comprehensive life cycle assessment (LCA) of sustainable flue gas carbon capture and utilization (CCU) for surfactant and fuel via Fischer-Tropsch synthesis (2025)
Journal Article
Sadhukhan, J., Fisher, O. J., Cummings, B., & Xuan, J. (2025). Novel comprehensive life cycle assessment (LCA) of sustainable flue gas carbon capture and utilization (CCU) for surfactant and fuel via Fischer-Tropsch synthesis. Journal of Co2 Utilization, 92, Article 103013. https://doi.org/10.1016/j.jcou.2024.103013

This novel study presents an effective comprehensive life cycle assessment (LCA) of a novel sustainable carbon dioxide capture and utilization (CCU) system to co-produce alcohol ethoxylate (AE7), a valuable surfactant (a high-value chemical component... Read More about Novel comprehensive life cycle assessment (LCA) of sustainable flue gas carbon capture and utilization (CCU) for surfactant and fuel via Fischer-Tropsch synthesis.

Self-optimising continuous-flow hydrothermal reactor for nanoparticle synthesis (2025)
Journal Article
Jackson, C., Robertson, K., Sechenyh, V., Chamberlain, T. W., Bourne, R. A., & Lester, E. (2025). Self-optimising continuous-flow hydrothermal reactor for nanoparticle synthesis. Reaction Chemistry and Engineering, https://doi.org/10.1039/d4re00339j

An autonomous continuous-flow, hydrothermal synthesis reactor, capable of self-optimising nanoparticle size using an in-line characterisation technique and machine learning is presented. The developed system is used for synthesis of hematite (α-Fe2O3... Read More about Self-optimising continuous-flow hydrothermal reactor for nanoparticle synthesis.

Rapid Gram-Scale Microwave-Assisted Synthesis of Organic Anodes for Sodium-Ion Batteries with Environmental Impact Assessment (2025)
Journal Article
Puscalau, C., Desai, A. V., Lizundia, E., Ettlinger, R., Adam, M., Morris, R., Armstrong, A. R., Tokay, B., & Laybourn, A. (2025). Rapid Gram-Scale Microwave-Assisted Synthesis of Organic Anodes for Sodium-Ion Batteries with Environmental Impact Assessment. Green Chemistry, https://doi.org/10.1039/d4gc05530f

Development of sustainable synthesis methods of organic electrode materials (OEMs) for sodium (Na)-ion batteries must take hold rapidly in large scale-synthesis if subsequent commercialisation is to occur. We report a facile and rapid gram-scale synt... Read More about Rapid Gram-Scale Microwave-Assisted Synthesis of Organic Anodes for Sodium-Ion Batteries with Environmental Impact Assessment.

Development of C. albican Anti-attachment Inkjet 3D Printing Ink, via High Throughput Screening (2025)
Presentation / Conference Contribution
Yong, L. X., Zhou, Z., Vallières, C., He, Y., Cuzzucoli Crucitti, V., Alexander, M. R., Avery, S., Wildman, R., & Irvine, D. (2024, August). Development of C. albican Anti-attachment Inkjet 3D Printing Ink, via High Throughput Screening. Presented at International Conference on Computational & Experimental Engineering and Sciences, Singapore, Singapore

The fungal pathogen Candida albicans (C. albicans) is particularly problematic for immunocompromised patients and those with medical implants. Introducing Candida-resistant medical devices could potentially reduce mortality rates from such infections... Read More about Development of C. albican Anti-attachment Inkjet 3D Printing Ink, via High Throughput Screening.