Skip to main content

Research Repository

Advanced Search

A New Thermal Elasto-Hydrodynamic Lubrication Solver Implementation in OpenFOAM

Layton, James; Rothwell, Benjamin C.; Ambrose, Stephen; Eastwick, Carol; Medina, Humberto; Rebelo, Neville

A New Thermal Elasto-Hydrodynamic Lubrication Solver Implementation in OpenFOAM Thumbnail


Authors

James Layton

CAROL EASTWICK CAROL.EASTWICK@NOTTINGHAM.AC.UK
Professor of Mechanical Engineering

NEVILLE REBELO NEVILLE.REBELO@NOTTINGHAM.AC.UK
Applications Engineer in Industrialisation of Electrical Machines and Drives



Abstract

Designing effective thermal management systems within transmission systems requires simulations to consider the contributions from phenomena such as hydrodynamic lubrication regions. Computational fluid dynamics (CFD) remains computationally expensive for practical cases of hydrodynamic lubrication while the thermo elasto-hydrodynamic lubrication (TEHL) theory has demonstrated good accuracy at a lower computational cost. To account for the effects of hydrodynamic lubrication in high-power transmission systems requires integrating TEHL into a CFD framework such that these methodologies can be interfaced. This study takes an initial step by developing a TEHL solver within OpenFOAM such that the program is prepared to be interfaced with a CFD module in future versions. The OpenFOAM solver includes the Elrod–Adams cavitation model, thermal effects, and elastic deformation of the surfaces, and considers mixing between the recirculating flow and oil feed by applying energy and mass continuity. A sensitivity study of the film mesh is presented to show the solution variation with refinement along the circumferential, axial and radial directions. A validation case is presented of an experimental single axial groove journal bearing which shows good agreement in the pressure and temperature results. The peak pressure in the film is predicted within 12% and the peak temperature in the bush is predicted within 5% when comparing the centerline profiles.

Citation

Layton, J., Rothwell, B. C., Ambrose, S., Eastwick, C., Medina, H., & Rebelo, N. (2023). A New Thermal Elasto-Hydrodynamic Lubrication Solver Implementation in OpenFOAM. Lubricants, 11(7), Article 308. https://doi.org/10.3390/lubricants11070308

Journal Article Type Article
Acceptance Date Jul 19, 2023
Online Publication Date Jul 22, 2023
Publication Date 2023-07
Deposit Date Jul 24, 2023
Publicly Available Date Jul 26, 2023
Journal Lubricants
Electronic ISSN 2075-4442
Publisher MDPI
Peer Reviewed Peer Reviewed
Volume 11
Issue 7
Article Number 308
DOI https://doi.org/10.3390/lubricants11070308
Keywords hydrodynamic lubrication; journal bearing; TEHL; OpenFOAM
Public URL https://nottingham-repository.worktribe.com/output/23441974
Publisher URL https://doi.org/10.3390/lubricants11070308

Files





You might also like



Downloadable Citations