Skip to main content

Research Repository

Advanced Search

All Outputs (651)

Highly Ordered BN⊥–BN⊥ Stacking Structure for Improved Thermally Conductive Polymer Composites (2020)
Journal Article
Ghosh, B., Xu, F., Grant, D. M., Giangrande, P., Gerada, C., George, M. W., & Hou, X. (2020). Highly Ordered BN⊥–BN⊥ Stacking Structure for Improved Thermally Conductive Polymer Composites. Advanced Electronic Materials, 6(11), Article 2000627. https://doi.org/10.1002/aelm.202000627

The substantial heat generation in modern electronic devices is one of the major issues requiring efficient thermal management. This work demonstrates a novel concept for the design of thermally conducting networks inside a polymer matrix for the dev... Read More about Highly Ordered BN⊥–BN⊥ Stacking Structure for Improved Thermally Conductive Polymer Composites.

Performance-related and rheological characterisation of natural rubber modified bitumen (2020)
Journal Article
Wititanapanit, J., Carvajal-Munoz, J. S., & Airey, G. (2021). Performance-related and rheological characterisation of natural rubber modified bitumen. Construction and Building Materials, 268, Article 121058. https://doi.org/10.1016/j.conbuildmat.2020.121058

This paper is motivated by the limited research available evaluating the comprehensive effects of natural rubber bitumen modification (NR) for pavement applications. A detailed laboratory programme was carried out to evaluate the influence of NR on t... Read More about Performance-related and rheological characterisation of natural rubber modified bitumen.

Zone-based public transport route optimisation in an urban network (2020)
Journal Article
Heyken Soares, P. (2021). Zone-based public transport route optimisation in an urban network. Public Transport, 13(1), 197–231. https://doi.org/10.1007/s12469-020-00242-0

The majority of academic studies on the optimisation of public transport routes consider passenger trips to be fixed between pairs of stop points. This can lead to barriers in the use of the developed algorithms in real-world planning processes, as t... Read More about Zone-based public transport route optimisation in an urban network.

Quantifying airtightness in Brazilian residential buildings with focus on its contribution to thermal comfort (2020)
Journal Article
Rodrigues, L., Tubelo, R., Vega Pasos, A., Gonçalves, J. C. S., Wood, C., & Gillott, M. (2020). Quantifying airtightness in Brazilian residential buildings with focus on its contribution to thermal comfort. Building Research and Information, https://doi.org/10.1080/09613218.2020.1825064

© 2020 Informa UK Limited, trading as Taylor & Francis Group. Airtightness refers to the amount of air leakage through a building’s envelope. This uncontrolled exchange of air between inside and outside, either infiltration or exfiltration, may lea... Read More about Quantifying airtightness in Brazilian residential buildings with focus on its contribution to thermal comfort.

Performance of a silica-polyethyleneimine adsorbent for post-combustion CO2 capture on a 100kg scale in a fluidized bed continuous unit (2020)
Journal Article
Kim, J. Y., Woo, J. M., Jo, S. H., Kim, H., Lee, S. Y., Yi, C. K., …Park, Y. C. (2020). Performance of a silica-polyethyleneimine adsorbent for post-combustion CO2 capture on a 100kg scale in a fluidized bed continuous unit. Chemical Engineering Journal, 407, Article 127209. https://doi.org/10.1016/j.cej.2020.127209

© 2020 Elsevier B.V. Polyethyleneimine (PEI)/silica adsorbents have been considered as a promising candidate for post-combustion CO2 capture, but the limited process study has been performed on a pilot-scale unit. Herein we report the 150 h continuou... Read More about Performance of a silica-polyethyleneimine adsorbent for post-combustion CO2 capture on a 100kg scale in a fluidized bed continuous unit.

The use of sar offset tracking for detecting sand dune movement in sudan (2020)
Journal Article
Mahmoud, A. M. A., Novellino, A., Hussain, E., Marsh, S., Psimoulis, P., & Smith, M. (2020). The use of sar offset tracking for detecting sand dune movement in sudan. Remote Sensing, 12(20), Article 3410. https://doi.org/10.3390/rs12203410

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. Sand movement is one of the main environmental hazards in Northern Sudan that threaten livelihood and rural communities. This paper investigates for the first time the use of the Synthetic Ape... Read More about The use of sar offset tracking for detecting sand dune movement in sudan.

Polydispersed droplet spectrum and exergy analysis in wet steam flows using method of moments (2020)
Journal Article
Ding, H., Tian, Y., Wen, C., Wang, C., & Sun, C. (2021). Polydispersed droplet spectrum and exergy analysis in wet steam flows using method of moments. Applied Thermal Engineering, 182, Article 116148. https://doi.org/10.1016/j.applthermaleng.2020.116148

In steam turbine flow, the complex droplet spectrum caused by nonequilibrium condensation is necessary to be modeled accurately to predict the droplet behavior and estimate the exergy destruction and erosion rate. This study built and validated a pol... Read More about Polydispersed droplet spectrum and exergy analysis in wet steam flows using method of moments.

Binder Jetting Additive Manufacturing of Hydroxyapatite Powders: Effects of Adhesives on Geometrical Accuracy and Green Compressive Strength (2020)
Journal Article
Zhou, Z., Lennon, A., Buchanan, F., McCarthy, H. O., & Dunne, N. (2020). Binder Jetting Additive Manufacturing of Hydroxyapatite Powders: Effects of Adhesives on Geometrical Accuracy and Green Compressive Strength. Additive Manufacturing, 36, Article 101645. https://doi.org/10.1016/j.addma.2020.101645

Binder jetting additive manufacturing (AM) is a promising process to print hydroxyapatite (HA) powder into bone tissue implants. However, one challenge remaining is the poor reactivity between HA powder with standard water-based ink. This study inves... Read More about Binder Jetting Additive Manufacturing of Hydroxyapatite Powders: Effects of Adhesives on Geometrical Accuracy and Green Compressive Strength.

Towards the Continuous Hydrothermal Synthesis of ZnO@Mg2Al-CO3 Core-Shell Composite Nanomaterials (2020)
Journal Article
Clark, I., Smith, J., Gomes, R. L., & Lester, E. (2020). Towards the Continuous Hydrothermal Synthesis of ZnO@Mg2Al-CO3 Core-Shell Composite Nanomaterials. Nanomaterials, 10(10), Article 2052. https://doi.org/10.3390/nano10102052

Core-shell Zinc Oxide/Layered Double Hydroxide (ZnO@LDH) composite nanomaterials have been produced by a one-step continuous hydrothermal synthesis process, in an attempt to further enhance the application potential of layered double hydroxide (LDH)... Read More about Towards the Continuous Hydrothermal Synthesis of ZnO@Mg2Al-CO3 Core-Shell Composite Nanomaterials.

Controlling the outcome of SN2 reactions in ionic liquids: from rational data set design to predictive linear regression models (2020)
Journal Article
Schindl, A., Hawker, R. R., Schaffarczyk McHale, K. S., Liu, K. T.-C., Morris, D. C., Hsieh, A. Y., …Jäger, C. M. (2020). Controlling the outcome of SN2 reactions in ionic liquids: from rational data set design to predictive linear regression models. Physical Chemistry Chemical Physics, 22, 23009 - 23018. https://doi.org/10.1039/d0cp04224b

Rate constants for a bimolecular nucleophilic substitution (SN2) process in a range of ionic liquids are correlated with calculated parameters associated with the charge localisation on the cation of the ionic liquid (including the molecular electros... Read More about Controlling the outcome of SN2 reactions in ionic liquids: from rational data set design to predictive linear regression models.

Mathematical approach to the validation of form removal surface texture software (2020)
Journal Article
Todhunter, L., Leach, R., & Blateyron, F. (2020). Mathematical approach to the validation of form removal surface texture software. Surface Topography: Metrology and Properties, 8(4), Article 045019. https://doi.org/10.1088/2051-672x/abc737

A new approach to the validation of surface texture form removal methods is introduced. A linear algebra technique is presented that obtains total least squares (TLS) model fits for a continuous mathematical surface definition. This model is applicab... Read More about Mathematical approach to the validation of form removal surface texture software.

Experimental Hybrid AC/DC-Microgrid Prototype for Laboratory Research (2020)
Presentation / Conference Contribution
Espina, E., Burgos-Mellado, C., Gómez, J. S., Llanos, J., Rute, E., Navas, A., …Sáez, D. (2020). Experimental Hybrid AC/DC-Microgrid Prototype for Laboratory Research. In 2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe) (1-9). https://doi.org/10.23919/EPE20ECCEEurope43536.2020.9215751

This paper describes a flexible testbed of a hybrid AC/DC microgrid developed for research purposes. The experimental setup is composed of 3 AC and 6 DC distributed generator units which are emulated by using three-legs inverters and settable output... Read More about Experimental Hybrid AC/DC-Microgrid Prototype for Laboratory Research.

Applicability of time-temperature superposition for laboratory-aged neat and SBS-modified bitumens (2020)
Journal Article
Cuciniello, G., Leandri, P., Polacco, G., Airey, G., & Losa, M. (2020). Applicability of time-temperature superposition for laboratory-aged neat and SBS-modified bitumens. Construction and Building Materials, 263, Article 120964. https://doi.org/10.1016/j.conbuildmat.2020.120964

© 2020 Elsevier Ltd The applicability of the time–temperature superposition principle (TTSP) can breakdown in the case of highly oxidized bitumens and polymer-modified bitumens (PMBs). This study investigates such problem in Styrene Butadiene Styrene... Read More about Applicability of time-temperature superposition for laboratory-aged neat and SBS-modified bitumens.

Additive manufacturing of advanced ceramic materials (2020)
Journal Article
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021). Additive manufacturing of advanced ceramic materials. Progress in Materials Science, 116, Article 100736. https://doi.org/10.1016/j.pmatsci.2020.100736

Additive manufacturing (AM) has the potential to disrupt the ceramic industry by offering new opportunities to manufacture advanced ceramic components without the need for expensive tooling, thereby reducing production costs and lead times and increa... Read More about Additive manufacturing of advanced ceramic materials.

SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network (2020)
Presentation / Conference Contribution
Wang, M., Yang, B., Xu, L., Li, J., Gerada, D., Gu, C., …Li, Y. (2020). SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network. In 2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe). https://doi.org/10.23919/epe20ecceeurope43536.2020.9215606

This paper proposed a linear state-space model for a resonant dual active bridge with a tuned capacitor-inductor-capacitor network which is applied to an energy storage system. The proposed model is used for predicting the behavior of the proposed sy... Read More about SISO Control Strategy of Resonant Dual Active Bridge with a Tuned CLC Network.

Incremental sheet forming of thermoplastics: a review (2020)
Journal Article
Zhu, H., Ou, H., & Popov, A. (2020). Incremental sheet forming of thermoplastics: a review. International Journal of Advanced Manufacturing Technology, 111, 565-587. https://doi.org/10.1007/s00170-020-06056-5

Incremental sheet forming (ISF) is a promising flexible manufacturing process, which has been tested in sheet forming of various metallic materials. Although ISF based forming of thermoplastics is relatively new, it has drawn considerable interests a... Read More about Incremental sheet forming of thermoplastics: a review.

Mathematical approach to the validation of surface texture filtration software (2020)
Journal Article
Todhunter, L., Leach, R., & Blateyron, F. (2020). Mathematical approach to the validation of surface texture filtration software. Surface Topography: Metrology and Properties, 8(4), Article 045017. https://doi.org/10.1088/2051-672X/abc0fb

A novel method for the validation of surface texture filtration software is introduced. Mathematically traceable reference pairs for linear Gaussian filtration are developed, utilising Fourier series surface definitions in conjunction with the freque... Read More about Mathematical approach to the validation of surface texture filtration software.