All Outputs (5)

Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings (2017)
Journal Article
Sadeghimeresht, E., Reddy, L., Hussain, T., Markocsan, N., & Joshi, S. (2018). Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings. Corrosion Science, 132, https://doi.org/10.1016/j.corsci.2017.12.033

Chlorine-induced corrosion of HVAF-sprayed Ni21Cr and Ni5Al coatings was investigated in 5 vol.% O2 + 500vppm HCl + N2 with and without KCl at 600 °C up to 168 h. Both coatings were protective in the absence of KCl. With KCl, Ni21Cr degraded through... Read More about Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings.

Microstructural evolution in solution heat treatment of gas- atomised Al alloy (7075) powder for cold spray (2017)
Journal Article
Sabard, A., Lovelock, H. D. V., & Hussain, T. (in press). Microstructural evolution in solution heat treatment of gas- atomised Al alloy (7075) powder for cold spray. Journal of Thermal Spray Technology, https://doi.org/10.1007/s11666-017-0662-2

Cold gas dynamic spray is being explored as a repair technique for high-value metallic components, given its potential to produce pore and oxide-free deposits of between several micrometers and several millimeters thick with good levels of adhesion a... Read More about Microstructural evolution in solution heat treatment of gas- atomised Al alloy (7075) powder for cold spray.

HVOF and laser cladded Fe-Cr-B coating in simulated biomass combustion: microstructure and fireside corrosion (2017)
Journal Article
Reddy, L., Shipway, P., Davis, C., & Hussain, T. (in press). HVOF and laser cladded Fe-Cr-B coating in simulated biomass combustion: microstructure and fireside corrosion. Oxidation of Metals, https://doi.org/10.1007/s11085-017-9774-9

Biomass is often considered as a low carbon alternative to fossil fuels in the power industry. However the heat exchangers in biomass plants can suffer from chloride based aggressive fireside corrosion. A commercially available amorphous Fe-Cr-B allo... Read More about HVOF and laser cladded Fe-Cr-B coating in simulated biomass combustion: microstructure and fireside corrosion.

Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition (2017)
Journal Article
Chen, H., Pala, Z., Hussain, T., & McCartney, D. (in press). Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, https://doi.org/10.1177/1464420717690559

This paper investigates the microstructure evolution of Al-TiB2 coatings prepared by cold spraying. In situ Al-TiB2 composite powders containing uniformly distributed titanium diboride (TiB2) particles with a size range of 5 to 100 nm in the Al matri... Read More about Fabrication and microstrain evolution of Al-TiB2 composite coating by cold spray deposition.

Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism (2017)
Journal Article
Yin, S., Xie, Y., Cizek, J., Ekoi, E., Hussain, T., Dowling, D., & Lupoi, R. (in press). Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism. Composites Part B: Engineering, 113, https://doi.org/10.1016/j.compositesb.2017.01.009

Diamond-reinforced metal matrix composites (DMMC) have great potential for wear-resistance applications due to the superior hardness of the diamond component. Cold spray as an emerging coating technique is able to fabricate coatings or bulk materials... Read More about Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism.