All Outputs (45)

Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions (2019)
Presentation / Conference Contribution
Khowja, M. R., Vakil, G., & Gerada, C. (2019). Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (922-927). https://doi.org/10.1109/IECON.2019.8927436

This paper presents an analytical tool to generate torque vs speed characteristics of the surface-mounted permanent magnet machines to minimize the computation time and efforts. The paper also derives an expression of d-axis current in the field weak... Read More about Analytical Tool to Generate Torque-Speed Characteristics for Surface Mounted PM Machines in Constant Torque and Field Weakening Regions.

Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System (2019)
Presentation / Conference Contribution
Khowja, M. R., Vakil, G., Gerada, C., Yang, T., Bozhko, S., & Wheeler, P. (2019). Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System. In Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (1435-1440). https://doi.org/10.1109/IECON.2019.8926961

Mechanically-driven actuators, compressors and pumps are being replaced by the aircraft manufacturers that shift the trend towards 'More Electric Aircraft' and hence reducing the mechanical linkages within the aircraft system. This elevates the depen... Read More about Trade-off Study of a High Power Density Starter-Generator for Turboprop Aircraft System.

Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier (2019)
Presentation / Conference Contribution
Kumar, R. M. R., Vakil, G., Gerada, D., Walker, A., La Rocca, S., Al-Ani, M., …Fernandes, B. G. (2019). Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier. In IECON 2019 Proceedings - 45th Annual Conference of the IEEE Industrial Electronics Society (4347-4352). https://doi.org/10.1109/IECON.2019.8926624

Electrical machines with high torque density are required for traction application. Availability of bonded magnets with complex shapes and magnetization pattern can significantly extend the design space of electrical machines. This paper introduces a... Read More about Enhancing the Torque Density of Conventional PM-SynRel Machine with Hybrid Flux Barrier.

Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions (2019)
Presentation / Conference Contribution
He, Y.-L., Vakil, G., Zhang, X.-C., Gao, P., Gerada, D., & Gerada, C. (2019). Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions. In Proceedings: 2019 IEEE Energy Conversion Congress and Exposition (ECCE) (3878-3883). https://doi.org/10.1109/ECCE.2019.8913180

This paper presents a comprehensive analysis on the rotor unbalanced magnetic pull (UMP) and the consequent mechanical response in 6 typical running conditions in a 20000 rpm high speed permanent magnet synchronous motor (HSPMSM) through finite eleme... Read More about Rotor UMP & Mechanical Response in HSPMSM in Typical Running Conditions.

Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator (2019)
Journal Article
He, Y.-L., Xu, M.-X., Xiong, J., Sun, Y.-X., Wang, X.-L., Gerada, D., & Vakil, G. (2019). Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator. IEEE Access, 7, 100813-100823. https://doi.org/10.1109/access.2019.2929868

This paper presents a comprehensive study on the variation laws of electromagnetic torque (EMT) under static air-gap eccentricity (SAGE) conditions in synchronous generators. Different from other studies, this paper focuses on not only the impact of... Read More about Effect of 3D Unidirectional and Hybrid SAGE on Electromagnetic Torque Fluctuation Characteristics in Synchronous Generator.

Sizing, design, and modelling of aerospace electric drive system with long feeder cables (2019)
Presentation / Conference Contribution
Xie, P., Vakil, G., & Gerarda, C. (2019). Sizing, design, and modelling of aerospace electric drive system with long feeder cables.

The aviation industry is tending towards more electric aircraft, replacing conventionally pneumatic, hydraulic, and mechanical systems with electrical solutions. The electrification of actuators is motivated by increased efficiency, reduced maintenan... Read More about Sizing, design, and modelling of aerospace electric drive system with long feeder cables.

Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines (2019)
Presentation / Conference Contribution
Xie, P., Ramanathan, R., Vakil, G., & Gerada, C. (2019). Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines.

This paper proposes a simple analytical machine sizing process for a three-phase surface mounted permanent magnet synchronous machines appropriate for both system level analysis and preliminary machine design. For system-level analysis, the proposed... Read More about Simplified Analytical Machine Sizing for Surface Mounted Permanent Magnet Machines.

Design of an Integrated Inductor for 45kW Aerospace Starter-Generator (2018)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Quadri, S. Q., Wheeler, P., & Patel, C. (2018). Design of an Integrated Inductor for 45kW Aerospace Starter-Generator. In 2018 IEEE Transportation and Electrification Conference and Expo (ITEC) (570-575). https://doi.org/10.1109/ITEC.2018.8450246

A close physical and functional integration of passive components is required to make an efficient and power dense overall system. Such power dense systems are a prerequisite in aerospace and marine applications. This paper presents a design of an in... Read More about Design of an Integrated Inductor for 45kW Aerospace Starter-Generator.

Mass Production Costing of Induction Machines for Automotive Applications (2018)
Presentation / Conference Contribution
Hundak, V., Cox, T., Vakil, G., & Gerada, C. (2018). Mass Production Costing of Induction Machines for Automotive Applications. In 2018 IEEE Transportation and Electrification Conference and Expo (ITEC) (500-505). https://doi.org/10.1109/ITEC.2018.8450116

Cost is one of the key parameters of electric machines designed for automotive applications. In order to keep manufacturing cost low, it is desirable to estimate the manufacturing cost of the machine in the early stages of the design process. For thi... Read More about Mass Production Costing of Induction Machines for Automotive Applications.

Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle (2018)
Presentation / Conference Contribution
Talha, A., Vakil, G., Cox, T., & Gerada, C. (2018). Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle. In NA

A switched reluctance machine (SRM) is very robust and capable to perform well under harsh conditions. It is simple in construction and avoids the use of magnets so it is cheap to manufacture. The powertrain of a hybrid vehicle presents challenging c... Read More about Design of a 43kW switched reluctance machine for a high performance hybrid electric vehicle.

Novel core designs to miniaturise passive magnetic components (2018)
Presentation / Conference Contribution
Walker, A., Vakil, G., & Gerada, C. (2018). Novel core designs to miniaturise passive magnetic components. In NA

Converter sizes are often dominated by passive magnetic components. Passive magnetic component sizes are in turn limited by electromagnetic saturation and thermal limits. This paper covers two modifications to the air gaps of tape wound amorphous mag... Read More about Novel core designs to miniaturise passive magnetic components.

Considerations on the effects that core material machining has on an electrical machine's performance (2018)
Journal Article
Al-Timimy, A., Vakil, G., Degano, M., Giangrande, P., Gerada, C., & Galea, M. (2018). Considerations on the effects that core material machining has on an electrical machine's performance. IEEE Transactions on Energy Conversion, 33(3), 1154-1163. https://doi.org/10.1109/TEC.2018.2808041

An often-overlooked aspect during the development process of electrical machines, is the validity and accuracy of the machine material properties being used at the design stage. Designers usually consider the data provided by the materials supplier,... Read More about Considerations on the effects that core material machining has on an electrical machine's performance.

Geometry optimization and characterization of three-phase medium frequency transformer for 10kVA isolated DC-DC converter (2017)
Presentation / Conference Contribution
Lee, Y., Vakil, G., Watson, A. J., & Wheeler, P. (2017). Geometry optimization and characterization of three-phase medium frequency transformer for 10kVA isolated DC-DC converter. In 2017 IEEE Energy Conversion Congress and Exposition (ECCE) (511-518). https://doi.org/10.1109/ECCE.2017.8095826

Three-phase Dual Active Bridge converter is advisable for the High-power DC-DC conversion system. In the ac link, galvanically isolated transformer operated at a medium frequency range provides stepping up or down of the secondary bridge voltage.... Read More about Geometry optimization and characterization of three-phase medium frequency transformer for 10kVA isolated DC-DC converter.

Design considerations for a high-power dual active bridge DC-DC converter with galvanically isolated transformer (2017)
Presentation / Conference Contribution
Lee, Y., Watson, A. J., Vakil, G., & Wheeler, P. (2017). Design considerations for a high-power dual active bridge DC-DC converter with galvanically isolated transformer. In 2017 IEEE Energy Conversion Congress and Exposition (ECCE) (4531-4537). https://doi.org/10.1109/ECCE.2017.8096777

Multi-megawatt scale isolated DC-DC converters are likely to become increasingly popular as means to interconnect the MVDC grids of different voltage levels. Three-phase dual active bridge DC-DC (3DAB) converters operating with the zero-voltage switc... Read More about Design considerations for a high-power dual active bridge DC-DC converter with galvanically isolated transformer.

Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators (2017)
Presentation / Conference Contribution
Wang, Y., Vakil, G., Nuzzo, S., Degano, M., Galea, M., Gerada, C., …Brown, N. (2017). Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators. In Proceedings - 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (163-168). https://doi.org/10.1109/WEMDCD.2017.7947741

Objective of this paper is to provide design recommendations to improve the performance and power density of a 400kVA salient-pole synchronous generator, without exceeding the limitations due to critical parameters such as total harmonic distortion o... Read More about Sensitivity analysis for performance and power density improvements in salient-pole synchronous generators.

Design optimization of integrated rotor-less inductors for high-speed AC drive applications (2017)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Patel, C., & Wheeler, P. (in press). Design optimization of integrated rotor-less inductors for high-speed AC drive applications. In 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD) (69-74)

Discrete sub-system due to passive elements in motor drive require functional and structural integration to make efficient and power dense overall system. Such power dense system is the prerequisite in aerospace and marine applications. This paper pr... Read More about Design optimization of integrated rotor-less inductors for high-speed AC drive applications.

Design optimization of integrated rotational inductor for high-speed AC drive applications (2017)
Presentation / Conference Contribution
Khowja, M. R., Gerada, C., Vakil, G., Patel, C., & Wheeler, P. (2017). Design optimization of integrated rotational inductor for high-speed AC drive applications.

In order to make an efficient and power dense overall system, a close physical and functional integration of passive components is required instead of having a separate sub¬system for passives. Such power dense system is vital in aerospace and marine... Read More about Design optimization of integrated rotational inductor for high-speed AC drive applications.

Design optimization of a high-power transformer for three-phase dual active bridge DC-DC converter for MVDC grids (2016)
Presentation / Conference Contribution
Lee, Y., Vakil, G., Feldman, R., Goodman, A., & Wheeler, P. (in press). Design optimization of a high-power transformer for three-phase dual active bridge DC-DC converter for MVDC grids.

High-power DC-DC converter will be one of the essential technologies for the future DC grids. Especially, a three-phase dual-active bridge DC-DC (3DAB) Converter is highly suitable for high-power DC systems. Key component within this converter is the... Read More about Design optimization of a high-power transformer for three-phase dual active bridge DC-DC converter for MVDC grids.

A high-power DC-DC converter based dual active bridge for MVDC grids on offshore wind farms (2016)
Presentation / Conference Contribution
Lee, Y., Vakil, G., Feldman, R., Watson, A. J., & Wheeler, P. (2016). A high-power DC-DC converter based dual active bridge for MVDC grids on offshore wind farms. In 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe) (1-10). https://doi.org/10.1109/EPE.2016.7695573

This paper presents the steady-state analysis of a high power step-up DC-DC converter based three-phase dual active bridge (3DAB) for use as a medium voltage (MV) DC-DC collector of offshore wind farms. An optimization procedure for a high-power medi... Read More about A high-power DC-DC converter based dual active bridge for MVDC grids on offshore wind farms.

Novel integrative options for passive filter inductor in high speed AC drives (2016)
Presentation / Conference Contribution
Raza Khowja, M., Gerada, C., Vakil, G., Wheeler, P., & Patel, C. (2016). Novel integrative options for passive filter inductor in high speed AC drives. In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society. https://doi.org/10.1109/IECON.2016.7793661

This paper presents novel integration options for passive inductor which include: motor-shaped rotational and motor-shaped rotor-less inductor for high speed motor drive system. The novel options have been designed and their performance is compared w... Read More about Novel integrative options for passive filter inductor in high speed AC drives.