All Outputs (13)

Atmospheric plasma spraying of ytterbium disilicate for abradable and environmental barrier coatings: A story of processing-microstructure relationships (2023)
Journal Article
Lynam, A., Rincon Romero, A., Xu, F., Brewster, G., Pattinson, G., & Hussain, T. (2023). Atmospheric plasma spraying of ytterbium disilicate for abradable and environmental barrier coatings: A story of processing-microstructure relationships. Ceramics International, 49(13), 22232-22243. https://doi.org/10.1016/j.ceramint.2023.04.053

Environmental barrier coatings (EBCs) are required to protect SiC based composites in high temperature, steam containing combustion environments found in the latest generation of high efficiency gas turbine aeroengines. Ytterbium disilicate (YbDS) ha... Read More about Atmospheric plasma spraying of ytterbium disilicate for abradable and environmental barrier coatings: A story of processing-microstructure relationships.

Correction to: Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance (2022)
Journal Article
Lynam, A., Romero, A. R., Xu, F., Wellman, R. G., & Hussain, T. (2022). Correction to: Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance. Journal of Thermal Spray Technology, 31(6), 2001-2001. https://doi.org/10.1007/s11666-022-01411-2

When originally published, the author list contained an incorrect initial for the fourth listed author. The name should have been published to read: R. G. Wellman. The original article has been corrected.

Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering (2022)
Journal Article
Li, P., Xu, F., Robertson, S., Zhou, Z., Hou, X., Clare, A. T., & Aboulkhair, N. T. (2022). Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering. Materials and Design, 216, Article 110543. https://doi.org/10.1016/j.matdes.2022.110543

Self-lubricating aluminium-based composites reinforced with solid lubricants promise to meet the demand for lightweight materials in green tribological applications. The design advantages granted by additive manufacturing (AM) processes coupled with... Read More about Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering.

Functionalised SiO2 modified icephobic nanocomposite electrospun membranes for outdoor electromagnetic shielding applications (2022)
Journal Article
Tas, M., Musa, U. G., Ahmed, I., Xu, F., Smartt, C., & Hou, X. (2022). Functionalised SiO2 modified icephobic nanocomposite electrospun membranes for outdoor electromagnetic shielding applications. Polymer, 240, Article 124499. https://doi.org/10.1016/j.polymer.2021.124499

Outdoor electronic equipment such as signal stations, radar units, and cellular base stations would benefit from electromagnetic interference (EMI) shielding systems, but ice accretion on the surface of these facilities often causes critical challeng... Read More about Functionalised SiO2 modified icephobic nanocomposite electrospun membranes for outdoor electromagnetic shielding applications.

Sodium Tungsten Oxide Bronze Nanowires Bundles in Adsorption of Methylene Blue Dye under UV and Visible Light Exposure (2021)
Journal Article
Thummavichai, K., Thi, L. A., Pung, S.-Y., Ola, O., Hussain, M. Z., Chen, Y., …Zhu, Y. (2021). Sodium Tungsten Oxide Bronze Nanowires Bundles in Adsorption of Methylene Blue Dye under UV and Visible Light Exposure. Energies, 14(5), Article 1322. https://doi.org/10.3390/en14051322

This paper describes the analysis and characterization of NayWOx bronze nanowires bundles and evaluation of their effective adsorption of methylene blue dye (MB). The Na-doped WOx bronze nanowires bundles were first synthesized via a simple solvother... Read More about Sodium Tungsten Oxide Bronze Nanowires Bundles in Adsorption of Methylene Blue Dye under UV and Visible Light Exposure.

Electro-thermal and mechanical performance of multi-wall carbon nanotubes buckypapers embedded in fibre reinforced polymer composites for ice protection applications (2020)
Journal Article
Zangrossi, F., Xu, F., Warrior, N., Karapappas, P., & Hou, X. (2020). Electro-thermal and mechanical performance of multi-wall carbon nanotubes buckypapers embedded in fibre reinforced polymer composites for ice protection applications. Journal of Composite Materials, 54(23), 3457-3469. https://doi.org/10.1177/0021998320915639

Several ice protection strategies have been developed to overcome the icing hazards in the aerospace industry. The electro-thermal method is one of the popular approaches to prevent ice accretion and accumulation on aircraft surfaces. Given the incre... Read More about Electro-thermal and mechanical performance of multi-wall carbon nanotubes buckypapers embedded in fibre reinforced polymer composites for ice protection applications.

One-step fabrication of superhydrophobic P(VDF-co-HFP) nanofibre membranes using electrospinning technique (2019)
Journal Article
Tas, M., Xu, F., Ahmed, I., & Hou, X. (2020). One-step fabrication of superhydrophobic P(VDF-co-HFP) nanofibre membranes using electrospinning technique. Journal of Applied Polymer Science, 137(24), Article 48817. https://doi.org/10.1002/app.48817

© 2019 Wiley Periodicals, Inc. In this study, superhydrophobic electrospun P(VDF-co-HFP) membranes were fabricated in a one-step electrospinning process. The effects of the key parameters of electrospinning (solution concentration, electrical potenti... Read More about One-step fabrication of superhydrophobic P(VDF-co-HFP) nanofibre membranes using electrospinning technique.

Electrospun nanofibre membrane based transparent slippery liquid-infused porous surfaces with icephobic properties (2019)
Journal Article
Taş, M., Memon, H., Xu, F., Ahmed, I., & Hou, X. (2020). Electrospun nanofibre membrane based transparent slippery liquid-infused porous surfaces with icephobic properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 585, Article 124177. https://doi.org/10.1016/j.colsurfa.2019.124177

Icephobic surfaces have attracted increasing attention due to their wide ranging application areas from wind and solar energy systems to aviation. Slippery liquid-infused porous surfaces (SLIPS) are being explored for passive ice protection due to th... Read More about Electrospun nanofibre membrane based transparent slippery liquid-infused porous surfaces with icephobic properties.

Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating (2018)
Journal Article
Wang, J., Liu, J., Neate, N. C., Bai, M., Xu, F., Hussain, T., Scotchford, C., & Hou, X. (2018). Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating. Journal of Alloys and Compounds, 765, https://doi.org/10.1016/j.jallcom.2018.06.239

Hydrophobic metallic coatings have attracted increasing interest in the recent years due to their excellent mechanical durability. But the wetting behavior and hydrophobic mechanism of metallic coatings are far from clear. In this work, Ni-Cu-P terna... Read More about Investigation on time-dependent wetting behavior of Ni-Cu-P ternary coating.

In situ investigations of the phase change behaviour of tungsten oxide nanostructures (2018)
Journal Article
Thummavichai, K., Wang, N., Xu, F., Rance, G., Xia, Y., & Zhu, Y. (2018). In situ investigations of the phase change behaviour of tungsten oxide nanostructures. Royal Society Open Science, 5, https://doi.org/10.1098/rsos.171932

This study appraises the use of in-situ diffraction and spectroscopy techniques, complemented with ex-situ electron microscopy analyses, to investigate the geometry and phase change behaviour of bundled ultrathin W18O49 nanowires and WO3 nanoparticle... Read More about In situ investigations of the phase change behaviour of tungsten oxide nanostructures.

A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites (2017)
Journal Article
Wang, N., Yang, Z., Xu, F., Thummavichai, K., Chen, H., Xia, Y., & Zhu, Y. (2017). A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites. Scientific Reports, 7(1), Article 11829. https://doi.org/10.1038/s41598-017-12200-1

A versatile Rotary Chemical Vapour Deposition (RCVD) technique for the in-situ synthesis of large scale carbon-coated non-magnetic metal oxide nanoparticles (NPs) is presented, and a controllable coating thickness varying between 1–5 nm has been achi... Read More about A generic method to synthesise graphitic carbon coated nanoparticles in large scale and their derivative polymer nanocomposites.

How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations (2017)
Journal Article
Xu, F., Kobayashi, T., Yang, Z., Sekine, T., Chang, H., Wang, N., …Zhu, Y. (2017). How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations. ACS Nano, 11(8), https://doi.org/10.1021/acsnano.7b02943

Nanocomposites fabricated using the toughest caged inorganic fullerene WS2 (IF-WS2) nanoparticles could offer ultimate protection via absorbing shockwaves; however, if the IF-WS2 nanomaterials really work, how they behave and what they experience wit... Read More about How the toughest inorganic fullerene cages absorb shockwave pressures in a protective nanocomposite: experimental evidence from two in situ investigations.

Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications (2016)
Journal Article
Qian, L., Xu, F., Voisey, K., Nekouie, V., Zhou, Z., Silberschmidt, V. V., & Hou, X. (2017). Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications. Surface and Coatings Technology, 311, https://doi.org/10.1016/j.surfcoat.2016.12.106

ZrO2 nano-particles were incorporated into electro-deposited PtAl coatings in an attempt to enhance their performance by exploiting the effect of reactive element oxides. PtAl coatings with and without ZrO2 particles were deposited onto three commerc... Read More about Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications.